BNSF CONDUCTOR FINAL SCRIPT 2026
FULL QUESTIONS AND CORRECT ANSWERS
SUCCESS PREP GRADED A+
⩥ By direct radio contact with a crew member of the train(S)
Answer: How will MW employees determine the location of a train after
receiving authority to occupy the track after its arrival? 6.2.1
⩥ All working limits that have been established must be documented on
the working limits form
Answer: An employee receives an authority that is joint. This authority
is joint with an another employee and their limits overlap. What
documentation is required? 6.3.1
⩥ Only under direction of the employee in charge of the track bulletin
form b
Answer: When authority limits overlap track bulletin form b limits, how
will all movements be made within the form b limits? 6.3.1
⩥ Establish protection in accordance with rule 6.19 flag protection
Answer: When employees are unable to obtain authority and it is
necessary to foul or occupy a main track or controlled siding, what must
be done? 6.3.1
, ⩥ That equipment or employees do not occupy or foul the track until
authority is received or protection is established
Answer: When requesting authority or establishing protection, what
must the employee in charge ensure? 6.3.1
⩥ Employees continuing to occupy a main track, controlled siding or
any track where ctc is in effect after midnight must contact the train
dispatcher to obtain additional form b's that may have been issued
Answer: When must employees refresh information in regards to all
form b's that may overlap their authority limits? 6.3.1
⩥ On the "Multiple work groups using the same authority" section of the
form
Answer: When more than one work group is using the same authority,
the employee in charge of the authority must have a job safety briefing
with each work group who will use the authority. The employee in
charge of the authority must record the name of the employee in charge
of each work group using the authority where? 6.3.1
⩥ When train is stopped and in view and a job briefing determines that
the train will not release its authority and all movement will be made
under direction of employee in charge
Answer: When may MW employees establish working limits using train
coordination? 6.3.4
FULL QUESTIONS AND CORRECT ANSWERS
SUCCESS PREP GRADED A+
⩥ By direct radio contact with a crew member of the train(S)
Answer: How will MW employees determine the location of a train after
receiving authority to occupy the track after its arrival? 6.2.1
⩥ All working limits that have been established must be documented on
the working limits form
Answer: An employee receives an authority that is joint. This authority
is joint with an another employee and their limits overlap. What
documentation is required? 6.3.1
⩥ Only under direction of the employee in charge of the track bulletin
form b
Answer: When authority limits overlap track bulletin form b limits, how
will all movements be made within the form b limits? 6.3.1
⩥ Establish protection in accordance with rule 6.19 flag protection
Answer: When employees are unable to obtain authority and it is
necessary to foul or occupy a main track or controlled siding, what must
be done? 6.3.1
, ⩥ That equipment or employees do not occupy or foul the track until
authority is received or protection is established
Answer: When requesting authority or establishing protection, what
must the employee in charge ensure? 6.3.1
⩥ Employees continuing to occupy a main track, controlled siding or
any track where ctc is in effect after midnight must contact the train
dispatcher to obtain additional form b's that may have been issued
Answer: When must employees refresh information in regards to all
form b's that may overlap their authority limits? 6.3.1
⩥ On the "Multiple work groups using the same authority" section of the
form
Answer: When more than one work group is using the same authority,
the employee in charge of the authority must have a job safety briefing
with each work group who will use the authority. The employee in
charge of the authority must record the name of the employee in charge
of each work group using the authority where? 6.3.1
⩥ When train is stopped and in view and a job briefing determines that
the train will not release its authority and all movement will be made
under direction of employee in charge
Answer: When may MW employees establish working limits using train
coordination? 6.3.4
