This Union Pacific Conductor Final Exam often consists of approximately 96 verified
questions covering safety, signaling, and operational rules. Below is a breakdown of the
core topics and specific sample questions commonly found in recent versions (2025–2026)
of this assessment.
Core Exam Categories
• Signaling & Aspects: Identifying the meaning of fixed, cab, and absolute signals.
• Operational Definitions: Understanding terms like "Block," "Yard," and "Breach".
• Safety Protocols: Rules for mounting/dismounting equipment, crossing between
cars, and securing unattended trains.
• Air Brake Tests: Procedures for Class I and Class III air brake tests.
• Flagging & Restricted Speed: How to proceed when encountering yellow-red or
red flags without specific track bulletins.
Quiz_________________?
A. 20 MPH -
Answer✅
When cars are shoved on a main track or a controlled siding in the authorized
direction, train speed must not exceed _______________?
A. 20 MPH
B. Restricted speed
C. 50 MPH
1
, Quiz_________________?
A. 100 percent -
Answer✅
For a successtul compiction ot a Class I Test (Initial Terminal Air Brake Test), what|
percentage of the train brakes must be opcrative before departing?
A. 100 percent
B. 90 percent
C. 85 percent
Quiz_________________?
A. 200 -
Answer✅
As you leave the main track and travel on an industrial lead to spot a few cars, fog rolls in
and your visibility is reduced to 400 fect. While on this industrial lead, the rules require you
to move at a speed that would enable you to stop within ___________ Feet
A. 200
B. 400
C. 300
Quiz_________________?
A. 250 -
Answer✅
In most states, what is the minimum distance cars, engincs, or equipment should bel left
standing next to a road crossing when there are adjacent tracks?
A. 250
B. 350
2
, C. 500
Quiz_________________?
A. A permanent speed restriction is in effect 2500 feet ahead -
Answer✅
What is the indication of the sign shown below?
A. A permanent speed restriction is in effect 2500 feet ahead
B. A permanent speed restriction is in efficct 1 mile ahead.
C. A temporary speed restriction is in effect 2 miles ahead.
Quiz_________________?
A. Alert and attentive -
Answer✅
Employees must be careful to prevent injuring themselves or others. They must be
_________ when performing their dutics and plan their work to avoid injury.
A. Alert and Attentive
B. Responsive and Activel
C. Organized and Permissive
Quiz_________________?
A. All 5 cars must be inspected as outlined in the Class 1 Air Brake Test
requirements. -
Answer✅
You have stopped your Class I train at an industry to pick up 5 cars. These cars are not a
solid block of cars. What is must be completed before picking up these 5 cars?
3
, A. All 5 cars must be inspected as outlined in the Class 1 Air Brake Test
requirements.
B. Only the rear car needs to be visually inspected.
C. As they are not a solid block of cars, an air brake test is not required.
Quiz_________________?
A. An Application and Release Test on the rear car (Class III Air Brake Test). -
Answer✅
After setting out 5 cars to an industry and re-coupling to your train, what air brake test is
required? Your train received a Class | Initial Terminal Air Brake Inspection before
departing the yard).
A. An Application and Release Test on the rear car (Class III Air Brake Test).
B. Inspect all brakes in your train to ensure they apply and release.
C. No air test is required. Ensure the air is being restored to the rear of the train.
Quiz_________________?
A. Be prepared to stop short of a red flag 2 miles beyond the yellow-red flag. If no red flag is
displayed, proceed at restricted speed. -
Answer✅
Your train encounters the yellow-red flag shown below. There is no track bulletin Form B
specitied for that location. How must your train proceed?
A. Be prepared to stop short of a red flag 2 miles beyond the yellow-red flag. If no red flag is
displayed, proceed at restricted speed.
4
questions covering safety, signaling, and operational rules. Below is a breakdown of the
core topics and specific sample questions commonly found in recent versions (2025–2026)
of this assessment.
Core Exam Categories
• Signaling & Aspects: Identifying the meaning of fixed, cab, and absolute signals.
• Operational Definitions: Understanding terms like "Block," "Yard," and "Breach".
• Safety Protocols: Rules for mounting/dismounting equipment, crossing between
cars, and securing unattended trains.
• Air Brake Tests: Procedures for Class I and Class III air brake tests.
• Flagging & Restricted Speed: How to proceed when encountering yellow-red or
red flags without specific track bulletins.
Quiz_________________?
A. 20 MPH -
Answer✅
When cars are shoved on a main track or a controlled siding in the authorized
direction, train speed must not exceed _______________?
A. 20 MPH
B. Restricted speed
C. 50 MPH
1
, Quiz_________________?
A. 100 percent -
Answer✅
For a successtul compiction ot a Class I Test (Initial Terminal Air Brake Test), what|
percentage of the train brakes must be opcrative before departing?
A. 100 percent
B. 90 percent
C. 85 percent
Quiz_________________?
A. 200 -
Answer✅
As you leave the main track and travel on an industrial lead to spot a few cars, fog rolls in
and your visibility is reduced to 400 fect. While on this industrial lead, the rules require you
to move at a speed that would enable you to stop within ___________ Feet
A. 200
B. 400
C. 300
Quiz_________________?
A. 250 -
Answer✅
In most states, what is the minimum distance cars, engincs, or equipment should bel left
standing next to a road crossing when there are adjacent tracks?
A. 250
B. 350
2
, C. 500
Quiz_________________?
A. A permanent speed restriction is in effect 2500 feet ahead -
Answer✅
What is the indication of the sign shown below?
A. A permanent speed restriction is in effect 2500 feet ahead
B. A permanent speed restriction is in efficct 1 mile ahead.
C. A temporary speed restriction is in effect 2 miles ahead.
Quiz_________________?
A. Alert and attentive -
Answer✅
Employees must be careful to prevent injuring themselves or others. They must be
_________ when performing their dutics and plan their work to avoid injury.
A. Alert and Attentive
B. Responsive and Activel
C. Organized and Permissive
Quiz_________________?
A. All 5 cars must be inspected as outlined in the Class 1 Air Brake Test
requirements. -
Answer✅
You have stopped your Class I train at an industry to pick up 5 cars. These cars are not a
solid block of cars. What is must be completed before picking up these 5 cars?
3
, A. All 5 cars must be inspected as outlined in the Class 1 Air Brake Test
requirements.
B. Only the rear car needs to be visually inspected.
C. As they are not a solid block of cars, an air brake test is not required.
Quiz_________________?
A. An Application and Release Test on the rear car (Class III Air Brake Test). -
Answer✅
After setting out 5 cars to an industry and re-coupling to your train, what air brake test is
required? Your train received a Class | Initial Terminal Air Brake Inspection before
departing the yard).
A. An Application and Release Test on the rear car (Class III Air Brake Test).
B. Inspect all brakes in your train to ensure they apply and release.
C. No air test is required. Ensure the air is being restored to the rear of the train.
Quiz_________________?
A. Be prepared to stop short of a red flag 2 miles beyond the yellow-red flag. If no red flag is
displayed, proceed at restricted speed. -
Answer✅
Your train encounters the yellow-red flag shown below. There is no track bulletin Form B
specitied for that location. How must your train proceed?
A. Be prepared to stop short of a red flag 2 miles beyond the yellow-red flag. If no red flag is
displayed, proceed at restricted speed.
4
