Ammo 63 U.S. Army Explosives Safety Familiarization
(Ammo-63-DL), Defense Ammunition Center, 2026 –
Practice Questions with Verified Answers
Introduction:
This document contains a comprehensive set of practice questions
and verified answers for the Ammo 63 U.S. Army Explosives Safety
Familiarization course. It covers key topics such as explosives
classification, fire prevention, storage procedures, SOP guidelines,
transportation safety, and risk management.
The material is structured in a Q&A format to support exam
preparation and reinforce understanding of safety protocols. It
reflects updated content aligned with 2026 training standards.
Exam Questions and Answers
Where do you find information on grounding system requirements
for assembling electro-explosive devices --- correct precise answer
---Standing operating procedure (SOP)
Which personal electronic item does not emit electromagnetic
radiation (EMR)? --- correct precise answer ---Landline phone
Which precaution must be taken during ammo operations to keep
EMR from igniting EEDs? --- correct precise answer ---You need to
post "No radio" signs
,What is the purpose of a lightning protection system (LPS)? ---
correct precise answer ---To safeguard structures and people from
lightning
What would be the most appropriate type of LPS for a large, open
area? --- correct precise answer ---Catenary
Which is a requirement for a lightning warning system? --- correct
precise answer ---To indicate the direction of approaching storms
Which three requirements are necessary to develop procedures for
terminating A&E operations when thunderstorms approach? ---
correct precise answer ---The sensitivity of the operation
The time to safely end the operation
The risks to the operation and personnel
Which item does not need to be managed to prevent and/or protect
against fires? --- correct precise answer ---Number of transients
/Which is the greatest hazard to A&E? --- correct precise answer ---
Excessive heat
, Which three items do firefighting forces need to know to prevent
and manage fires on installations? --- correct precise answer ---The
risks of each hazard class/division (HC/D)
Where to find the map of A&E areas
Methods to fight fires for all types of A&E
Which is not a requirement for installation personnel to perform
during a fire? --- correct precise answer ---Determining the cause
What do firefighters need to know to prevent and manage fires on
installations? --- correct precise answer ---Methods to fight fires
for all ammo types
When working with ammo, which requirement applies to fire
extinguishers? --- correct precise answer ---Extinguishers must be
full charged and operable
Which item is not used to prevent fires on A&E installations? ---
correct precise answer ---Limiting the net explosive weight (NEW)
(Ammo-63-DL), Defense Ammunition Center, 2026 –
Practice Questions with Verified Answers
Introduction:
This document contains a comprehensive set of practice questions
and verified answers for the Ammo 63 U.S. Army Explosives Safety
Familiarization course. It covers key topics such as explosives
classification, fire prevention, storage procedures, SOP guidelines,
transportation safety, and risk management.
The material is structured in a Q&A format to support exam
preparation and reinforce understanding of safety protocols. It
reflects updated content aligned with 2026 training standards.
Exam Questions and Answers
Where do you find information on grounding system requirements
for assembling electro-explosive devices --- correct precise answer
---Standing operating procedure (SOP)
Which personal electronic item does not emit electromagnetic
radiation (EMR)? --- correct precise answer ---Landline phone
Which precaution must be taken during ammo operations to keep
EMR from igniting EEDs? --- correct precise answer ---You need to
post "No radio" signs
,What is the purpose of a lightning protection system (LPS)? ---
correct precise answer ---To safeguard structures and people from
lightning
What would be the most appropriate type of LPS for a large, open
area? --- correct precise answer ---Catenary
Which is a requirement for a lightning warning system? --- correct
precise answer ---To indicate the direction of approaching storms
Which three requirements are necessary to develop procedures for
terminating A&E operations when thunderstorms approach? ---
correct precise answer ---The sensitivity of the operation
The time to safely end the operation
The risks to the operation and personnel
Which item does not need to be managed to prevent and/or protect
against fires? --- correct precise answer ---Number of transients
/Which is the greatest hazard to A&E? --- correct precise answer ---
Excessive heat
, Which three items do firefighting forces need to know to prevent
and manage fires on installations? --- correct precise answer ---The
risks of each hazard class/division (HC/D)
Where to find the map of A&E areas
Methods to fight fires for all types of A&E
Which is not a requirement for installation personnel to perform
during a fire? --- correct precise answer ---Determining the cause
What do firefighters need to know to prevent and manage fires on
installations? --- correct precise answer ---Methods to fight fires
for all ammo types
When working with ammo, which requirement applies to fire
extinguishers? --- correct precise answer ---Extinguishers must be
full charged and operable
Which item is not used to prevent fires on A&E installations? ---
correct precise answer ---Limiting the net explosive weight (NEW)
