MK1 SWE Study Guide Questions and
Answers () (Real Exam
Verified Answers)
• What article always captain to conduct NJP -✓✓Article 15
• Where two types of procedures that may be accessed from
maintenance procedure option -✓✓Official and local
• Who is authorized to conduct tag outs -✓✓Authorizing officer
• Out of calibration tags should be used when -✓✓When indicating
parameter errors are small and consistent
• For modernized units the boat inspection reports are to be entered
through -✓✓Almis/ EALpage
• Cutter engineering report shall be completed in accordance with -
✓✓Naval engineering manual chapter 90
• On an MPC the warning shall come where in the text -✓✓Before the
instruction
• On an MPC what would constitute an expendable -✓✓Rags
• PMS that does not need to be included in the cutter engineering report
is -✓✓Daily and weekly
• With regards to casreps what is mandatory on all updates corrects and
cancellations -✓✓REF
, • Which unit besides a shore unit are exempt from filling out the POSIT
line -✓✓Cutter underway
• A casrep it should be made as soon as possible no later than ____hours
-✓✓24
• Casualties that effect a secondary mission should always have a
casualty category of -✓✓2
• AMPN is mandatory after any set that contains an entry of? -✓✓Other,
tech, none
• In a 1PARTSID if the NIIN is not known what needs to be put in the
line -✓✓Unknown
• What is the criteria for submitting CASCOR -✓✓The delay expressed
an hours, and correcting the casualty due to parts unavailability, a list of
all parts requested and dates received; the total number of man-hours
expanded; the number of equipment hours since last failure
• You find something else wrong with the piece of equipment that has
already been CASREP'd you should send an? -✓✓Update
• Where do you find the hierarchy of guidance for specification plans -
✓✓NEM chapter 41
• Which specifications may be used as a guided researching propose
engineering changes and solutions -✓✓GSO
• Which specification do not apply to construction, alteration or
maintenance of Coast Guard cutters -✓✓Commercial general
specifications for t-ships
Answers () (Real Exam
Verified Answers)
• What article always captain to conduct NJP -✓✓Article 15
• Where two types of procedures that may be accessed from
maintenance procedure option -✓✓Official and local
• Who is authorized to conduct tag outs -✓✓Authorizing officer
• Out of calibration tags should be used when -✓✓When indicating
parameter errors are small and consistent
• For modernized units the boat inspection reports are to be entered
through -✓✓Almis/ EALpage
• Cutter engineering report shall be completed in accordance with -
✓✓Naval engineering manual chapter 90
• On an MPC the warning shall come where in the text -✓✓Before the
instruction
• On an MPC what would constitute an expendable -✓✓Rags
• PMS that does not need to be included in the cutter engineering report
is -✓✓Daily and weekly
• With regards to casreps what is mandatory on all updates corrects and
cancellations -✓✓REF
, • Which unit besides a shore unit are exempt from filling out the POSIT
line -✓✓Cutter underway
• A casrep it should be made as soon as possible no later than ____hours
-✓✓24
• Casualties that effect a secondary mission should always have a
casualty category of -✓✓2
• AMPN is mandatory after any set that contains an entry of? -✓✓Other,
tech, none
• In a 1PARTSID if the NIIN is not known what needs to be put in the
line -✓✓Unknown
• What is the criteria for submitting CASCOR -✓✓The delay expressed
an hours, and correcting the casualty due to parts unavailability, a list of
all parts requested and dates received; the total number of man-hours
expanded; the number of equipment hours since last failure
• You find something else wrong with the piece of equipment that has
already been CASREP'd you should send an? -✓✓Update
• Where do you find the hierarchy of guidance for specification plans -
✓✓NEM chapter 41
• Which specifications may be used as a guided researching propose
engineering changes and solutions -✓✓GSO
• Which specification do not apply to construction, alteration or
maintenance of Coast Guard cutters -✓✓Commercial general
specifications for t-ships
