Soldering Practices Module 1 and 2 Test || with Complete Solution.
Recertification of Certified IPC Specialists _____. correct answers May be administered by any
currently certified Master IPC Trainer or Certified IPC Trainer
Which of the following IPC product classifications would include products where continued
performance and extended life is required, and for which uninterrupted service is desired but not
critical and typically the end-use environment would not cause failures? correct answers Class 2-
Dedicated Service Electronic Products
All IPC certification programs for MIT, CIT, and CIS require recertification after what period of
time? correct answers 2 years
Illumination at the surface of workstations should be at least_____. correct answers 1000 lm/m²
All instructors, operators and all inspection personnel __________ be proficient in the tasks to be
performed. correct answers Shall
A solder connection that exhibits poor wetting and that is characterized by a grayish porous
appearance defines? correct answers Cold solder connection
The word "shall" in this document invokes a requirement for manufacturers of ________ of
product, and failure to comply with the requirement is a noncompliance to this standard. correct
answers all classes
Certified IPC Specialist Training programs will train, test and certify in the correct application of
the criteria for which class(es) of products? correct answers All 3 product classes
One of the goals of the IPC training programs is to _____. correct answers Provide an
understanding of accept/reject criteria.
Recertification of Certified IPC Specialists _____. correct answers May be administered by any
currently certified Master IPC Trainer or Certified IPC Trainer
Which of the following IPC product classifications would include products where continued
performance and extended life is required, and for which uninterrupted service is desired but not
critical and typically the end-use environment would not cause failures? correct answers Class 2-
Dedicated Service Electronic Products
All IPC certification programs for MIT, CIT, and CIS require recertification after what period of
time? correct answers 2 years
Illumination at the surface of workstations should be at least_____. correct answers 1000 lm/m²
All instructors, operators and all inspection personnel __________ be proficient in the tasks to be
performed. correct answers Shall
A solder connection that exhibits poor wetting and that is characterized by a grayish porous
appearance defines? correct answers Cold solder connection
The word "shall" in this document invokes a requirement for manufacturers of ________ of
product, and failure to comply with the requirement is a noncompliance to this standard. correct
answers all classes
Certified IPC Specialist Training programs will train, test and certify in the correct application of
the criteria for which class(es) of products? correct answers All 3 product classes
One of the goals of the IPC training programs is to _____. correct answers Provide an
understanding of accept/reject criteria.
