Category 3 Non-Cab Operated Crane
Safety | LATEST UPDATE
COMPREHENSIVE QUESTIONS
(Frequently Most Tested) AND VERIFEID
ANSWERS (100% accurate)|GET IT A+
A floating crane with a capacity of 200,000lbs. is a ________________ crane. -
ANSWER-Category 1
What is the category of a jib crane with a capacity of less than 20,000 pounds? -
ANSWER-Category 3
An OET, Bridge crane with a capacity of 80,000lbs. is a ________________ crane. -
ANSWER-Category 2
A commercial truck mounted crane with a capacity of 14,000 lbs. is a __________
crane. - ANSWER-category 4
What types of power does a Category 1 or 4 crane generally use and what is its
source? - ANSWER-Electric or hydraulic power supplied by a diesel engine
Load - ________ parts are those that restrain position or control the movement of
the load. - ANSWER-controling
,A hook is what type of component? - ANSWER-Load-Bearing Part
Hydraulic foot brakes are what type or group of components? - ANSWER-Load-
Controlling Parts
Load - _____________ parts are those that support the load. - ANSWER-bearing
How is electrical current conveyed from the revolving portion of the crane to the
lower crane structure? - ANSWER-Through the collector ring system
Safety devices that provide protection for personnel and equipment are
considered _____________ safety devices. - ANSWER-general
Safety devices that affect the safe load lifting and handling capabilities of
equipment are considered __________________ safety devices. - ANSWER-
operational
Which of the following does not affect the safe operation of the crane? - ANSWER-
General Safety Devices
A travel alarm is what type or group of components? - ANSWER-
A travel alarm is what type or group of components? - ANSWER-General Safety
Device
, During the walk around check you notice a loose bolt on the crane. You should: -
ANSWER-Notify your supervisor of the deficiency.
The crane Pre-use Check consists of: - ANSWER-A walk around visual check
Performing a "No load" operational
It is the operator's responsibility to report a deficiency to the Crane Department. -
ANSWER-false
Deficiencies are required to be reported by the end of the shift. - ANSWER-false
If the upper limit switch is working correctly, there is no need to check the lower
limit switch. - ANSWER-fasle
Part of the no load operational check is to ensure the proper _________ of all
controls. - ANSWER-function
What is the most important reason to do a pre-use check? - ANSWER-To make
sure the crane is safe to use.
Documented checks are required for which of the following Category 3 cranes? -
ANSWER-gantry
wall
bridge
Safety | LATEST UPDATE
COMPREHENSIVE QUESTIONS
(Frequently Most Tested) AND VERIFEID
ANSWERS (100% accurate)|GET IT A+
A floating crane with a capacity of 200,000lbs. is a ________________ crane. -
ANSWER-Category 1
What is the category of a jib crane with a capacity of less than 20,000 pounds? -
ANSWER-Category 3
An OET, Bridge crane with a capacity of 80,000lbs. is a ________________ crane. -
ANSWER-Category 2
A commercial truck mounted crane with a capacity of 14,000 lbs. is a __________
crane. - ANSWER-category 4
What types of power does a Category 1 or 4 crane generally use and what is its
source? - ANSWER-Electric or hydraulic power supplied by a diesel engine
Load - ________ parts are those that restrain position or control the movement of
the load. - ANSWER-controling
,A hook is what type of component? - ANSWER-Load-Bearing Part
Hydraulic foot brakes are what type or group of components? - ANSWER-Load-
Controlling Parts
Load - _____________ parts are those that support the load. - ANSWER-bearing
How is electrical current conveyed from the revolving portion of the crane to the
lower crane structure? - ANSWER-Through the collector ring system
Safety devices that provide protection for personnel and equipment are
considered _____________ safety devices. - ANSWER-general
Safety devices that affect the safe load lifting and handling capabilities of
equipment are considered __________________ safety devices. - ANSWER-
operational
Which of the following does not affect the safe operation of the crane? - ANSWER-
General Safety Devices
A travel alarm is what type or group of components? - ANSWER-
A travel alarm is what type or group of components? - ANSWER-General Safety
Device
, During the walk around check you notice a loose bolt on the crane. You should: -
ANSWER-Notify your supervisor of the deficiency.
The crane Pre-use Check consists of: - ANSWER-A walk around visual check
Performing a "No load" operational
It is the operator's responsibility to report a deficiency to the Crane Department. -
ANSWER-false
Deficiencies are required to be reported by the end of the shift. - ANSWER-false
If the upper limit switch is working correctly, there is no need to check the lower
limit switch. - ANSWER-fasle
Part of the no load operational check is to ensure the proper _________ of all
controls. - ANSWER-function
What is the most important reason to do a pre-use check? - ANSWER-To make
sure the crane is safe to use.
Documented checks are required for which of the following Category 3 cranes? -
ANSWER-gantry
wall
bridge
