API 580 UPDATED ACTUAL Questions
and CORRECT Answers
Which of the following statements is correct with regard to equipment items with risks deemed acceptable
by RBI analysis?
A Inspection interval should be tightened
B Inspection effectiveness should be adjusted
C Equipment should be removed from inspection programs
D No further mitigation is necessary - CORRECT ANSWER -D
Which of the following statements is correct with regard to the results of quantitative analysis?
A They normally provide an initial screening with which to rank units for attention.
B They are usually numeric and should be comparable
C They must be included in the documentation of any RBI evaluation
D They are more accurate that the results of a qualitative analysis. - CORRECT ANSWER -B
In RBI, residual factors for loss of containment include all of the following except:
A Human Error
B Unknown mechanisms of deterioration
C Inspection efforts
D Secondary effects from nearby units. - CORRECT ANSWER -C
Compared to quantitative analysis, qualitative analysis using broad ranges generally requires:
A a lower level of judgement, skill, and understanding.
B Greater accuracy in data input to compensate for lower precision of the models
C Higher level of judgment, skill, and understanding
,D Better training in understanding the impact of data quality - CORRECT ANSWER -C
In RBI investigation, consequence analysis is intended to provide a measure of the:
A Mitigations necessary to reduce risk.
B Overall risk of a potential failure
C Maximum liability for a failure
D Significance of a potential failure. - CORRECT ANSWER -D
Risk reduction is:
A Synonymous with risk management
B Synonymous with inspection optimization
C Part of risk management
D Achieved only by inspection - CORRECT ANSWER -C
The value of a qualitative approach is that:
A the risk assessment process is much faster
B It uses logic models that depict combinations of events
C It enables completion of a risk assessment in the absence of detailed data.
D It produces relative risk numbers rather than absolute risk numbers. - CORRECT ANSWER -C
RBI contributes to reduction of overall life-cycle costs by:
A using less expensive inspection techniques
B Increasing the number of internal inspections
C Increasing the number of non-intrusive inspections.
D Enhancing the prediction of failure caused by deterioration mechanisms - CORRECT
ANSWER -D
, Which of the following is the most important to the success of risk management by emergency isolation?
A. Operations surveillance
B. Chain-wheel-operated gate valves
C. Fire deluge systems
D. Proper isolation valve locations - CORRECT ANSWER -D
For RBI methods, sensitivity analysis is:
A. Employed only when the risk matrix indicates that the risk is high
B. Normally employed to determine the effects of dominate failure mechanisms for each piece of
equipment studied.
C. A review of input variables in a risk calculation to determine their influence on the risk variables.
D. Based on statistical analysis that uses historical data gathered from a particular facility to develop a
better understanding of the risk value. - CORRECT ANSWER -c
The suitability and current condition of equipment within the current operating envelope will determine
the:
A. Consequence of failure
B. Probability of failure
C. Total risk
D. Likelihood - CORRECT ANSWER -B
The urgency of performing inspection activities depends primarily upon:
A. The magnitude of the consequence
B. The level of unmitigated risk
C. Previous inspection findings and corrosion rates
D. Jurisdictional requirements - CORRECT ANSWER -B
and CORRECT Answers
Which of the following statements is correct with regard to equipment items with risks deemed acceptable
by RBI analysis?
A Inspection interval should be tightened
B Inspection effectiveness should be adjusted
C Equipment should be removed from inspection programs
D No further mitigation is necessary - CORRECT ANSWER -D
Which of the following statements is correct with regard to the results of quantitative analysis?
A They normally provide an initial screening with which to rank units for attention.
B They are usually numeric and should be comparable
C They must be included in the documentation of any RBI evaluation
D They are more accurate that the results of a qualitative analysis. - CORRECT ANSWER -B
In RBI, residual factors for loss of containment include all of the following except:
A Human Error
B Unknown mechanisms of deterioration
C Inspection efforts
D Secondary effects from nearby units. - CORRECT ANSWER -C
Compared to quantitative analysis, qualitative analysis using broad ranges generally requires:
A a lower level of judgement, skill, and understanding.
B Greater accuracy in data input to compensate for lower precision of the models
C Higher level of judgment, skill, and understanding
,D Better training in understanding the impact of data quality - CORRECT ANSWER -C
In RBI investigation, consequence analysis is intended to provide a measure of the:
A Mitigations necessary to reduce risk.
B Overall risk of a potential failure
C Maximum liability for a failure
D Significance of a potential failure. - CORRECT ANSWER -D
Risk reduction is:
A Synonymous with risk management
B Synonymous with inspection optimization
C Part of risk management
D Achieved only by inspection - CORRECT ANSWER -C
The value of a qualitative approach is that:
A the risk assessment process is much faster
B It uses logic models that depict combinations of events
C It enables completion of a risk assessment in the absence of detailed data.
D It produces relative risk numbers rather than absolute risk numbers. - CORRECT ANSWER -C
RBI contributes to reduction of overall life-cycle costs by:
A using less expensive inspection techniques
B Increasing the number of internal inspections
C Increasing the number of non-intrusive inspections.
D Enhancing the prediction of failure caused by deterioration mechanisms - CORRECT
ANSWER -D
, Which of the following is the most important to the success of risk management by emergency isolation?
A. Operations surveillance
B. Chain-wheel-operated gate valves
C. Fire deluge systems
D. Proper isolation valve locations - CORRECT ANSWER -D
For RBI methods, sensitivity analysis is:
A. Employed only when the risk matrix indicates that the risk is high
B. Normally employed to determine the effects of dominate failure mechanisms for each piece of
equipment studied.
C. A review of input variables in a risk calculation to determine their influence on the risk variables.
D. Based on statistical analysis that uses historical data gathered from a particular facility to develop a
better understanding of the risk value. - CORRECT ANSWER -c
The suitability and current condition of equipment within the current operating envelope will determine
the:
A. Consequence of failure
B. Probability of failure
C. Total risk
D. Likelihood - CORRECT ANSWER -B
The urgency of performing inspection activities depends primarily upon:
A. The magnitude of the consequence
B. The level of unmitigated risk
C. Previous inspection findings and corrosion rates
D. Jurisdictional requirements - CORRECT ANSWER -B
