API 1169 Review UPDATED ACTUAL Questions and CORRECT
Answers
Which of the following equipment may NOT be required internal line clamps
for a pressure test?
before testing begins, a _____ with explanatory notes and pressure test procedure
data should be prepared
the pressure testing of newly constructed liquid pipelines ASME B31.4, 49 Code of Federal Regulations, Part 195 and any other applicable
and replaced segments of existing pipelinesshould be governmental
performed in accordance with regulations.
Before the actual line filling operation, it is advisable to Sizing pig, caliper or deformation tool
run a ______ in an effort to identify any
geometric abnormalities that may exist in the line prior to
the test
Personnel conducting a pressure test should keep: Complete record of the test, including details of the test operation and events
such as weather
variations, test failures, bleedoffs, repressurizations, and so forth
According to API 1169 an INSPECTOR is an individual true
qualified to monitor, assess, evaluate, verify,
discuss, decide, resolve, report, and document pipeline
construction activities to ensure the
requirements of the design, drawings, specifications,
regulations, and industry practices are being met
safely, efficiently, and in an environmentally sound
manner.
Quality Assurance includes those activities focused on true
providing confidence that quality requirements
are consistently fulfilled
Inspectors are NOT empowered and expected to shut work schedule of the contractor
down any work on the basis of, but not limited to
situations or activities that have occurred, are occurring,
or may occur that could result in:
Inspection Personnel are expected to interact with false
representatives of newspapers, TV, or other media
seeking information
Inspectors should evaluate the following areas to avoid Traffic Congestion - at the local Walmart when a sale is in progress
incidents and raise awareness of hazards,
except:
, According to API, Q1, Specification for Quality Programs, true
calibration is a comparison to a standard of
known accuracy and making any needed adjustments.
According to API, Q1, Specification for Quality Programs, management
calibration is a comparison to a standard of
known accuracy and making any needed adjustments.
Regarding training and awareness, the organization shall: Provide for quality management system training and job training;
Maintain appropriate records of education, training, skills, and experience;
The quality management system documentation shall All federally required processes regarding the project at hand
include the following, except for:
Regarding design and development review, at suitable To evaluate the suitability, adequacy, and effectiveness of the results of design
stages, review(s) shall be performed: and development
stages to meet specified requirements;
To identify any problems and propose necessary actions;
The Contingency Plan shall include the following, at a Actions required in response to significant risk scenarios to mitigate effects of
minimum: disruptive incidents;
Identification and assignment of responsibilities and authorities;
Internal and external communication controls
Where arc welding is regularly carried out, adjacent walls Low reflectivity to ultraviolet radiation
and other surfaces shall have:
When using cleaning compounds prior to welding, manufacturers
______ instructions shall be followed
Fire watchers shall be posted where welding or cutting is Proximity of Combustibles - Combustible materials in building construction or
done and where a large fire might develop, or contents are closer
whenever any of the following conditions exist: that a radius of 35 feet to the point of operation.
Openings - There are wall or floor openings within a radius of 35 feet which
expose combustible
material in adjacent areas, including concealed spaces in walls, ceilings or floors.
Metal Walls and Pipes - Combustible materials adjacent to the opposite side of
metal partitions,
walls, ceiling, or roofs, or in contact with pipes, and are likely to be ignited by
conduction or radiation.
Cylinders of liquefied gases shall not be charged to more 1/2
than ____ the maximum capacity by weight
or pressure.
Unconnected cylinders shall be stored in an approved false
storage area, preferably indoors, but not near a
building entrance
Answers
Which of the following equipment may NOT be required internal line clamps
for a pressure test?
before testing begins, a _____ with explanatory notes and pressure test procedure
data should be prepared
the pressure testing of newly constructed liquid pipelines ASME B31.4, 49 Code of Federal Regulations, Part 195 and any other applicable
and replaced segments of existing pipelinesshould be governmental
performed in accordance with regulations.
Before the actual line filling operation, it is advisable to Sizing pig, caliper or deformation tool
run a ______ in an effort to identify any
geometric abnormalities that may exist in the line prior to
the test
Personnel conducting a pressure test should keep: Complete record of the test, including details of the test operation and events
such as weather
variations, test failures, bleedoffs, repressurizations, and so forth
According to API 1169 an INSPECTOR is an individual true
qualified to monitor, assess, evaluate, verify,
discuss, decide, resolve, report, and document pipeline
construction activities to ensure the
requirements of the design, drawings, specifications,
regulations, and industry practices are being met
safely, efficiently, and in an environmentally sound
manner.
Quality Assurance includes those activities focused on true
providing confidence that quality requirements
are consistently fulfilled
Inspectors are NOT empowered and expected to shut work schedule of the contractor
down any work on the basis of, but not limited to
situations or activities that have occurred, are occurring,
or may occur that could result in:
Inspection Personnel are expected to interact with false
representatives of newspapers, TV, or other media
seeking information
Inspectors should evaluate the following areas to avoid Traffic Congestion - at the local Walmart when a sale is in progress
incidents and raise awareness of hazards,
except:
, According to API, Q1, Specification for Quality Programs, true
calibration is a comparison to a standard of
known accuracy and making any needed adjustments.
According to API, Q1, Specification for Quality Programs, management
calibration is a comparison to a standard of
known accuracy and making any needed adjustments.
Regarding training and awareness, the organization shall: Provide for quality management system training and job training;
Maintain appropriate records of education, training, skills, and experience;
The quality management system documentation shall All federally required processes regarding the project at hand
include the following, except for:
Regarding design and development review, at suitable To evaluate the suitability, adequacy, and effectiveness of the results of design
stages, review(s) shall be performed: and development
stages to meet specified requirements;
To identify any problems and propose necessary actions;
The Contingency Plan shall include the following, at a Actions required in response to significant risk scenarios to mitigate effects of
minimum: disruptive incidents;
Identification and assignment of responsibilities and authorities;
Internal and external communication controls
Where arc welding is regularly carried out, adjacent walls Low reflectivity to ultraviolet radiation
and other surfaces shall have:
When using cleaning compounds prior to welding, manufacturers
______ instructions shall be followed
Fire watchers shall be posted where welding or cutting is Proximity of Combustibles - Combustible materials in building construction or
done and where a large fire might develop, or contents are closer
whenever any of the following conditions exist: that a radius of 35 feet to the point of operation.
Openings - There are wall or floor openings within a radius of 35 feet which
expose combustible
material in adjacent areas, including concealed spaces in walls, ceilings or floors.
Metal Walls and Pipes - Combustible materials adjacent to the opposite side of
metal partitions,
walls, ceiling, or roofs, or in contact with pipes, and are likely to be ignited by
conduction or radiation.
Cylinders of liquefied gases shall not be charged to more 1/2
than ____ the maximum capacity by weight
or pressure.
Unconnected cylinders shall be stored in an approved false
storage area, preferably indoors, but not near a
building entrance
