Industrial Maintenance Midterm 2026 – Mechanical Systems, Troubleshooting, and Safety Study Guide

Industrial Maintenance Midterm

1. open end wrench Turning square head nuts and bolts




2. box end wrench Turning hex head nuts and bolts




3. ratchet wrench a type of wrench or spanner that has a socket attached at one end, usually used
to turn a fastener.




4. Adjustable A wrench with a movable jaw that can be adjusted to fit ditterent size bolts or
Wrench nuts.
(Crescent
Wrench)


5. flare nut wrench A type of box-end wrench that has a slot in the box section to allow the wrench
to slip through a tube or pipe. Also called a flare tubing wrench.




1/
10

, Industrial Maintenance Midterm


6. torque wrench apply additional leverage to a fastener; looks like a socket wrench but has
addition- al internal mechanisms designed to measure and limit the amount
of force being applied




7. The flukes of a 45 degrees
Reed and Prince
screw driver are
at what angle?

8. offset screwdriv- has the shank set at an angle to the blade to allow the tool to be used in cramped
er spaces




9. Round Shank
Screwdriver




10. Stubby
Screwdriver
(close-quarter
screwdriver)
2/
10