ASTM ACI CONCRETE STRENGTH TESTING
TECHNICIAN EXAMINATION ACTUAL EXAM 2026/2027
COMPLETE QUESTIONS AND VERIFIED SOLUTIONS
/BRAND NEW!!
ASTM Standard dealing with proper capping methods -
ANSWER-C617
The procedure for capping enables concrete cylinders to
meet the standard's requirements for ____ and ____ -
ANSWER-Planeness and Perpendicularity
The calibration of the testing machines must be verified
under 4 conditions: at least ____, upon original
,installation, or after _____, after making _____ or
adjustments, and whenever there is reason to suspect the
_____ of the indicated load - ANSWER-annually,
relocation, repairs, accuracy
The machine must be power operated and apply the load
intermittently. True or False? - ANSWER-False
Supplemental means of loading for calibration may be
power or hand operated. True or False? - ANSWER-True
The percentage of error for loads used in the machine
should not exceed _____ of the indicated load. -
ANSWER-+_ 1 %
, The testing machine should have 2 steel bearing blocks: a
spherically seated block and a solid block. True or false? -
ANSWER-True
The _____ and _____ of the spherically seated bearing
block must be designed so the steel in the contact area
doesn't permanently deform when loaded to the capacity
of the testing machine. - ANSWER-ball and socketq
The curved surface of the socket should be kept _____
and lubricated with _____ _____ _____ - ANSWER-clean,
petroleum-based oil
TECHNICIAN EXAMINATION ACTUAL EXAM 2026/2027
COMPLETE QUESTIONS AND VERIFIED SOLUTIONS
/BRAND NEW!!
ASTM Standard dealing with proper capping methods -
ANSWER-C617
The procedure for capping enables concrete cylinders to
meet the standard's requirements for ____ and ____ -
ANSWER-Planeness and Perpendicularity
The calibration of the testing machines must be verified
under 4 conditions: at least ____, upon original
,installation, or after _____, after making _____ or
adjustments, and whenever there is reason to suspect the
_____ of the indicated load - ANSWER-annually,
relocation, repairs, accuracy
The machine must be power operated and apply the load
intermittently. True or False? - ANSWER-False
Supplemental means of loading for calibration may be
power or hand operated. True or False? - ANSWER-True
The percentage of error for loads used in the machine
should not exceed _____ of the indicated load. -
ANSWER-+_ 1 %
, The testing machine should have 2 steel bearing blocks: a
spherically seated block and a solid block. True or false? -
ANSWER-True
The _____ and _____ of the spherically seated bearing
block must be designed so the steel in the contact area
doesn't permanently deform when loaded to the capacity
of the testing machine. - ANSWER-ball and socketq
The curved surface of the socket should be kept _____
and lubricated with _____ _____ _____ - ANSWER-clean,
petroleum-based oil
