EXAM PRACTICE QUESTIONS COMPLETE WITH 100%
VERIFIED ANSWERS
Question 1
What is the maximum routine inspection interval for a typical in-service bridge in
satisfactory condition under NBIS?
A) 12 months
B) 24 months
C) 36 months
D) 48 months
Correct Answer: B) 24 months
Explanation: The National Bridge Inspection Standards (NBIS) require routine
inspections at intervals not exceeding 24 months. Extensions up to 48 months are
possible only with FHWA approval and a risk-based justification.
Question 2
Which component rating automatically requires a bridge to be flagged as
structurally deficient?
A) Deck rating of 5
B) Superstructure rating of 6
, C) Substructure rating of 4 or less
D) Channel rating of 7
Correct Answer: C) Substructure rating of 4 or less
Explanation: A bridge is considered structurally deficient if any of the three
primary components (deck, superstructure, substructure) has a condition rating of
4 (Poor) or below.
Question 3
What is the minimum inspection frequency for a fracture critical member (FCM)?
• A) 12 months
• B) 24 months
• C) 48 months
• D) 60 months
Correct Answer: A) 12 months
Explanation: NBIS requires that fracture critical members be inspected every 12
months because their failure would likely cause collapse of the bridge.
Question 4
Which of the following is a critical finding requiring immediate action?
• A) Minor spalling on the deck surface
• B) A broken tension member in a truss bridge
• C) Light corrosion on a handrail
• D) A single clogged weep hole
Correct Answer: B) A broken tension member in a truss bridge
,Explanation: A broken tension member is a critical finding because it directly
compromises structural integrity and safety. Immediate notification of the
Program Manager and appropriate load restriction or closure is required.
Question 5
What does a condition rating of 3 (Serious) indicate?
• A) Excellent condition with minor wear
• B) Advanced section loss, cracking, or spalling that may require close
monitoring
• C) No noticeable defects
• D) Imminent failure
Correct Answer: B) Advanced section loss, cracking, or spalling that may require
close monitoring
Explanation: Rating 3 (Serious) indicates that advanced deterioration has
occurred. The component is not yet at imminent failure (rating 1 or 2) but requires
close monitoring and likely repair.
Question 6
Who can serve as a Team Leader for routine bridge inspections?
• A) Any licensed professional engineer
• B) A certified inspector who has completed NHI training and has field
experience under a certified Team Leader
• C) Any bridge maintenance worker
• D) A civil engineering student
Correct Answer: B) A certified inspector who has completed NHI training and has
field experience under a certified Team Leader
, Explanation: NBIS requires Team Leaders to be certified by an FHWA-approved
program, complete NHI training, have field experience, and complete refresher
training every 5 years.
Question 7
How often must a Team Leader complete refresher training?
• A) Every 1 year
• B) Every 2 years
• C) Every 5 years
• D) Every 10 years
Correct Answer: C) Every 5 years
Explanation: To maintain certification, Team Leaders must complete refresher
training every 60 months (5 years).
Question 8
What is the primary purpose of a damage inspection?
• A) To satisfy routine scheduling requirements
• B) To assess a bridge after a known event such as a flood, collision, fire, or
overload
• C) To rate the load capacity of a new bridge
• D) To measure channel scour annually
Correct Answer: B) To assess a bridge after a known event such as a flood,
collision, fire, or overload
Explanation: Damage inspections are unscheduled inspections triggered by
specific events that may have compromised bridge safety.