AMMO CDC's Module 4 Review Exam questions and
answers Graded A+| 2026 Updated
Before using an electric drill, what is the first thing you should do?
Make sure the diameter of the hole to be drilled is within the capacity of the drill
3 multiple choice options
The purpose of cutting lubricant in most drilling operations is to increase the
drilling speed and the drill bit life.
3 multiple choice options
Which minimum articles of safety gear must be worn when using a bench
grinder?
Eye and face protection
3 multiple choice options
An electric saw blade must be operating at what speed before it contacts the
material being cut?
Full
3 multiple choice options
How many pounds per square inch (psi) of clean, dry air is required at the tool
end of the air hose to ensure the tool is operating safely and efficiently?
90
3 multiple choice options
What condition would prevent an operator from applying power to a hoist or
other powered lifting device?
An Air Force (AF) Form 979 is attached to the unit.
3 multiple choice options
, What should be worn anytime there is a potential for injury from overhead
objects during a lifting operation?
Protective helmets
3 multiple choice options
What is the most common type of lifting sling used in the munitions career field?
Wire rope
3 multiple choice options
The following are all good safety practices to follow when using a lifting sling
except
inspecting the sling by passing your bare hand over the body of the sling.
3 multiple choice options
The annunciators displayed on the Fluke 8025-series multimeter are used to
distinguish among
ohms, kilohms, and megohms.
3 multiple choice options
When the MHU-141 trailer is loaded or towed with the hinged deck panels open,
what must be done?
The deck-panel supports must be properly positioned and locked in place with
quick-release pins
3 multiple choice options
What are the two operational modes of the Fluke 8025-series multimeter?
Range and hold
3 multiple choice options
The steering system on the MHU-141/M trailer has a turning radius of how many
degrees?
40
answers Graded A+| 2026 Updated
Before using an electric drill, what is the first thing you should do?
Make sure the diameter of the hole to be drilled is within the capacity of the drill
3 multiple choice options
The purpose of cutting lubricant in most drilling operations is to increase the
drilling speed and the drill bit life.
3 multiple choice options
Which minimum articles of safety gear must be worn when using a bench
grinder?
Eye and face protection
3 multiple choice options
An electric saw blade must be operating at what speed before it contacts the
material being cut?
Full
3 multiple choice options
How many pounds per square inch (psi) of clean, dry air is required at the tool
end of the air hose to ensure the tool is operating safely and efficiently?
90
3 multiple choice options
What condition would prevent an operator from applying power to a hoist or
other powered lifting device?
An Air Force (AF) Form 979 is attached to the unit.
3 multiple choice options
, What should be worn anytime there is a potential for injury from overhead
objects during a lifting operation?
Protective helmets
3 multiple choice options
What is the most common type of lifting sling used in the munitions career field?
Wire rope
3 multiple choice options
The following are all good safety practices to follow when using a lifting sling
except
inspecting the sling by passing your bare hand over the body of the sling.
3 multiple choice options
The annunciators displayed on the Fluke 8025-series multimeter are used to
distinguish among
ohms, kilohms, and megohms.
3 multiple choice options
When the MHU-141 trailer is loaded or towed with the hinged deck panels open,
what must be done?
The deck-panel supports must be properly positioned and locked in place with
quick-release pins
3 multiple choice options
What are the two operational modes of the Fluke 8025-series multimeter?
Range and hold
3 multiple choice options
The steering system on the MHU-141/M trailer has a turning radius of how many
degrees?
40
