NCCER CORE CURRICULUM EXAM – NEWEST
2026 UPDATE FAST REVIWED FROM ACTUAL
TEST 100 QUESTIONS AND 100% VERIFIED
ANSWERS| A+ GRADE Q&A | INSTANT
DOWNLOAD PDF
1. Which of the following is a primary goal of the NCCER Core Curriculum?
A. To teach specialized trade skills
B. To provide foundational knowledge for construction and maintenance
C. To certify only project managers
D. To prepare workers for office administration
This curriculum focuses on basic construction knowledge, safety, and employability
skills.
2. What does OSHA stand for?
A. Occupational Safety and Health Association
B. Occupational Safety and Health Administration
C. Office of Safety and Hazard Analysis
D. Occupational Standards for Health and Assessment
OSHA sets and enforces workplace safety standards in the U.S.
3. What is the first step in conducting a job site hazard assessment?
A. Notify the supervisor
B. Wear personal protective equipment
C. Identify potential hazards
D. Begin work immediately
Identifying hazards helps prevent accidents before work starts.
4. Which type of fire extinguisher should be used on electrical fires?
A. Water
B. Foam
C. CO2 or Dry Chemical
D. Wet Chemical
Water conducts electricity and could worsen electrical fires.
5. What is the recommended action if an accident occurs on the job site?
A. Continue work and report later
B. Stop work and report to supervisor immediately
C. Only report if serious injury occurs
D. Fix the situation alone
Prompt reporting ensures proper medical attention and documentation.
6. What is a “confined space”?
A. Any small office area
B. An area with limited entry/exit and potential hazards
C. A storage closet
D. Any site over 500 square feet
Confined spaces require special safety protocols due to restricted access.
, 7. Which of the following is an example of personal protective equipment (PPE)?
A. Safety signage
B. Hard hats and safety glasses
C. Fire extinguisher
D. First-aid kit
PPE protects the worker from injury directly.
8. The term “lockout/tagout” refers to:
A. Securing tools after use
B. Isolating energy sources during maintenance
C. Locking doors for security
D. Labeling equipment for inspection
Lockout/tagout prevents accidental equipment start-up during servicing.
9. Which type of hazard is most associated with heavy lifting?
A. Chemical hazard
B. Musculoskeletal hazard
C. Electrical hazard
D. Thermal hazard
Improper lifting can lead to strains and back injuries.
10. What is the purpose of a Material Safety Data Sheet (MSDS) or Safety Data Sheet
(SDS)?
A. Provide construction drawings
B. Track employee hours
C. Provide information about chemical hazards
D. Document daily safety meetings
SDS includes handling, storage, and emergency instructions for chemicals.
11. Which tool is commonly used to measure angles in construction?
A. Tape measure
B. Hammer
C. Protractor or angle finder
D. Level
Accurate angle measurements are essential for proper assembly and alignment.
12. What does the term “scaffold” refer to?
A. Temporary platform used for access at height
B. Permanent building structure
C. Safety barrier around machines
D. Electrical conduit
Scaffolds provide safe elevated work surfaces.
13. Which of the following is a safe practice when working at heights?
A. Ignore fall protection if working quickly
B. Use guardrails, safety harnesses, or fall arrest systems
C. Rely on coworkers for support
D. Wear regular shoes
Fall protection is required by OSHA to prevent serious injuries.
14. When handling power tools, it is essential to:
A. Use them with wet hands
B. Follow manufacturer instructions and use PPE
2026 UPDATE FAST REVIWED FROM ACTUAL
TEST 100 QUESTIONS AND 100% VERIFIED
ANSWERS| A+ GRADE Q&A | INSTANT
DOWNLOAD PDF
1. Which of the following is a primary goal of the NCCER Core Curriculum?
A. To teach specialized trade skills
B. To provide foundational knowledge for construction and maintenance
C. To certify only project managers
D. To prepare workers for office administration
This curriculum focuses on basic construction knowledge, safety, and employability
skills.
2. What does OSHA stand for?
A. Occupational Safety and Health Association
B. Occupational Safety and Health Administration
C. Office of Safety and Hazard Analysis
D. Occupational Standards for Health and Assessment
OSHA sets and enforces workplace safety standards in the U.S.
3. What is the first step in conducting a job site hazard assessment?
A. Notify the supervisor
B. Wear personal protective equipment
C. Identify potential hazards
D. Begin work immediately
Identifying hazards helps prevent accidents before work starts.
4. Which type of fire extinguisher should be used on electrical fires?
A. Water
B. Foam
C. CO2 or Dry Chemical
D. Wet Chemical
Water conducts electricity and could worsen electrical fires.
5. What is the recommended action if an accident occurs on the job site?
A. Continue work and report later
B. Stop work and report to supervisor immediately
C. Only report if serious injury occurs
D. Fix the situation alone
Prompt reporting ensures proper medical attention and documentation.
6. What is a “confined space”?
A. Any small office area
B. An area with limited entry/exit and potential hazards
C. A storage closet
D. Any site over 500 square feet
Confined spaces require special safety protocols due to restricted access.
, 7. Which of the following is an example of personal protective equipment (PPE)?
A. Safety signage
B. Hard hats and safety glasses
C. Fire extinguisher
D. First-aid kit
PPE protects the worker from injury directly.
8. The term “lockout/tagout” refers to:
A. Securing tools after use
B. Isolating energy sources during maintenance
C. Locking doors for security
D. Labeling equipment for inspection
Lockout/tagout prevents accidental equipment start-up during servicing.
9. Which type of hazard is most associated with heavy lifting?
A. Chemical hazard
B. Musculoskeletal hazard
C. Electrical hazard
D. Thermal hazard
Improper lifting can lead to strains and back injuries.
10. What is the purpose of a Material Safety Data Sheet (MSDS) or Safety Data Sheet
(SDS)?
A. Provide construction drawings
B. Track employee hours
C. Provide information about chemical hazards
D. Document daily safety meetings
SDS includes handling, storage, and emergency instructions for chemicals.
11. Which tool is commonly used to measure angles in construction?
A. Tape measure
B. Hammer
C. Protractor or angle finder
D. Level
Accurate angle measurements are essential for proper assembly and alignment.
12. What does the term “scaffold” refer to?
A. Temporary platform used for access at height
B. Permanent building structure
C. Safety barrier around machines
D. Electrical conduit
Scaffolds provide safe elevated work surfaces.
13. Which of the following is a safe practice when working at heights?
A. Ignore fall protection if working quickly
B. Use guardrails, safety harnesses, or fall arrest systems
C. Rely on coworkers for support
D. Wear regular shoes
Fall protection is required by OSHA to prevent serious injuries.
14. When handling power tools, it is essential to:
A. Use them with wet hands
B. Follow manufacturer instructions and use PPE
