RVTI Level 1 Certification Actual Exam || Most Recent Exam Actual
Complete Real Exam Questions And Correct Answers (Verified
Answers) Already Graded A+ | Guaranteed Success!! Newest Exam ||
Just Released!!
When releasing an air/gas mixture of propane, ensure a minimum of feet in
every
direction between the container and source of ignition.
25
The lockup pressure test verifies the pressure at which
The regulator locks up when no propane is flowing
Immediately after conducting the operating pressure test
Close up the gas cock
Any regulator pressure over_ inches WC will require the regulator to be replaced.
14
During a timed pressure drop test, no pressure drop should be detected. If
there is a pressure increase due to thermal expansion _____, and if there is
a pressure drop __________________________________________________________ _.
Repeat the test locate and repair leal, and retest
,What should be documented for a timed pressure drop test with a test apparatus?
Inches of water
When adjusting a system regulator, the operating test should show a working
pressure of about 11 inches, and the lockup pressure should never
exceed ______________________________________________________ inches.
14
The operating test is used to determine the pressure the regulator is giving when
at least
___ of the appliance load is functioning.
50%
A regulator must have a rated capacity equal to or greater than the total Btu/Hr
input of
All appliances
The RV standard requires that the timed pressure drop test be conducted for at
least
3 minutes
What is the most important reason to document tests?
Protects against lawsuits
What should be documented for a timed pressure drop test when doing the test
at the range?
Manometer measurement and duration
, hat does DWV mean?
Drain, waste, vent
Why is ABS piping used in the RV industry?
It resists impact in cold temperature
An RV water distribution system needs
A means of providing pressure
If a customer complains of lukewarm water at one or more hot faucets
A bypass valve might be partially open or failed
Sealants used when building city water test kits should
Be for potable water
What sealant is most appropriate to use when assembling a city water test kit?
Thread
Which step is part of a freshwater system inspection?
Conduct a water system leak test
Complete Real Exam Questions And Correct Answers (Verified
Answers) Already Graded A+ | Guaranteed Success!! Newest Exam ||
Just Released!!
When releasing an air/gas mixture of propane, ensure a minimum of feet in
every
direction between the container and source of ignition.
25
The lockup pressure test verifies the pressure at which
The regulator locks up when no propane is flowing
Immediately after conducting the operating pressure test
Close up the gas cock
Any regulator pressure over_ inches WC will require the regulator to be replaced.
14
During a timed pressure drop test, no pressure drop should be detected. If
there is a pressure increase due to thermal expansion _____, and if there is
a pressure drop __________________________________________________________ _.
Repeat the test locate and repair leal, and retest
,What should be documented for a timed pressure drop test with a test apparatus?
Inches of water
When adjusting a system regulator, the operating test should show a working
pressure of about 11 inches, and the lockup pressure should never
exceed ______________________________________________________ inches.
14
The operating test is used to determine the pressure the regulator is giving when
at least
___ of the appliance load is functioning.
50%
A regulator must have a rated capacity equal to or greater than the total Btu/Hr
input of
All appliances
The RV standard requires that the timed pressure drop test be conducted for at
least
3 minutes
What is the most important reason to document tests?
Protects against lawsuits
What should be documented for a timed pressure drop test when doing the test
at the range?
Manometer measurement and duration
, hat does DWV mean?
Drain, waste, vent
Why is ABS piping used in the RV industry?
It resists impact in cold temperature
An RV water distribution system needs
A means of providing pressure
If a customer complains of lukewarm water at one or more hot faucets
A bypass valve might be partially open or failed
Sealants used when building city water test kits should
Be for potable water
What sealant is most appropriate to use when assembling a city water test kit?
Thread
Which step is part of a freshwater system inspection?
Conduct a water system leak test
