NCIDQ – PX Exam with all Correct & 100% Verified
Answers |Actual Complete Update |Already Graded A+
Examples of items included in a complex water conservation system that requires more involvement
by the Interior Designer and the full design team include: ✔Correct Answer-purple color coded
graywater piping and dual piped potable/non-potable water systems.
Fire Damper ✔Correct Answer-used to restrict and PREVENT the spread of fire AND smoke
Smoke Dampers ✔Correct Answer-used to RESIST the passage of smoke and air
Dynamic fire dampers ✔Correct Answer-close when airflow velocity and pressure increases a
certain amount
static fire dampers ✔Correct Answer-work with HVAC systems designed to shut down
automatically in a fire.
An air handler access panel should measure a minimum of ✔Correct Answer-2'x2'
Which wall components are used most often for typical commercial construction? ✔Correct
Answer-2 1/2 in or 3 5/8 in (64 mm or 92 mm) metal studs spaced 24 in (610 mm) on center
Slip joint ✔Correct Answer-allows the floor above a partition to move without finish cracking or
damaging the partition
astragal ✔Correct Answer-used to seal the opening and provide extra security when the doors are
closed
Dead loads ✔Correct Answer-considered to be the fixed material weights and other fixed elements
such as equipment,
live loads ✔Correct Answer-weights from occupants, furniture, and other movable equipment
How do you prevent spread of fire and smoke to adjacent spaces in the plenum of a multi story
building? ✔Correct Answer-use fire-rated dividers
An accessible route may have a slope up to: ✔Correct Answer-1:20 (1 in of rise for every 20 in of
distance), or 5%
Type V building ✔Correct Answer-(combustible, such as all wood structure) is limited to only a few
thousand square feet in area and one or two stories in height depending on occupancy.
Section 1203 of the 2018 IBC/International Building Codes deals with what important aspect of the
Interior Environments? ✔Correct Answer-all habitable spaces are to be provided with space
heating
accessory occupancy ✔Correct Answer-space or room that is ancillary to the main occupancy but
does not exceed 10% of the floor area of the main occupancy
, For office buildings, the overall building is allowed to use how many watts per square foot to power
the interior lighting for the entire building ✔Correct Answer-.79
Covers labeling programs and specifies the procedures and principles that third-party certifiers or
ecolabelers must follow? ✔Correct Answer-ISO14024
ASHRAE 62 ✔Correct Answer-specific standard for ventilation for ensuring acceptable indoor air
quality (IAQ)
ASHRAE/IESNA Standard 90.1 ✔Correct Answer-Energy Standard for Buildings Except Low-Rise
Residential Buildings
ISO (International Standards Organization) ✔Correct Answer-independent, non-governmental
international organization with a membership of 164 national standards bodies.
ISO14020 ✔Correct Answer-describes a set of guiding principles for the development and use of
environmental labels and declarations by any practitioner of environmental labeling
What attributes does the BIFMA e3, Furniture Sustainability Standard consider when addressing
sustainability? ✔Correct Answer-material utilization, energy impacts, ecosystem health, social
responsibility.
Which occupancy group is most restrictive? ✔Correct Answer-assembly occupancy
Pictograms ✔Correct Answer-shall have a field height of 6 inches (150 mm) minimum. Characters
and braille shall not be located in the pictogram field.
Glazing in fire rated partitions, doors or sidelights may not exceed how many sq in/cm²? ✔Correct
Answer-100 sq in
The minimum number of toilet fixtures required for an interior design remodeling is determined by:
✔Correct Answer-occupant load and occupancy group
design process can be thought of as three phases ✔Correct Answer-analysis, synthesis, and
implementation
Synthesis Phase ✔Correct Answer-where the parts are pulled together to form a solution and
develop your design intentions
Analysis Phase ✔Correct Answer-the problem is identified, researched, dissected, and analyzed
When do Warranties typically commence (go into effect)? ✔Correct Answer-on the date of
substantial completion
What are the four broad categories of energy efficiency strategies? ✔Correct Answer-Building
commissioning, mechanical systems, electricity use, and plumbing.
The circulation of a building is included in what square foot calculation total? ✔Correct Answer-
Occupant area
Answers |Actual Complete Update |Already Graded A+
Examples of items included in a complex water conservation system that requires more involvement
by the Interior Designer and the full design team include: ✔Correct Answer-purple color coded
graywater piping and dual piped potable/non-potable water systems.
Fire Damper ✔Correct Answer-used to restrict and PREVENT the spread of fire AND smoke
Smoke Dampers ✔Correct Answer-used to RESIST the passage of smoke and air
Dynamic fire dampers ✔Correct Answer-close when airflow velocity and pressure increases a
certain amount
static fire dampers ✔Correct Answer-work with HVAC systems designed to shut down
automatically in a fire.
An air handler access panel should measure a minimum of ✔Correct Answer-2'x2'
Which wall components are used most often for typical commercial construction? ✔Correct
Answer-2 1/2 in or 3 5/8 in (64 mm or 92 mm) metal studs spaced 24 in (610 mm) on center
Slip joint ✔Correct Answer-allows the floor above a partition to move without finish cracking or
damaging the partition
astragal ✔Correct Answer-used to seal the opening and provide extra security when the doors are
closed
Dead loads ✔Correct Answer-considered to be the fixed material weights and other fixed elements
such as equipment,
live loads ✔Correct Answer-weights from occupants, furniture, and other movable equipment
How do you prevent spread of fire and smoke to adjacent spaces in the plenum of a multi story
building? ✔Correct Answer-use fire-rated dividers
An accessible route may have a slope up to: ✔Correct Answer-1:20 (1 in of rise for every 20 in of
distance), or 5%
Type V building ✔Correct Answer-(combustible, such as all wood structure) is limited to only a few
thousand square feet in area and one or two stories in height depending on occupancy.
Section 1203 of the 2018 IBC/International Building Codes deals with what important aspect of the
Interior Environments? ✔Correct Answer-all habitable spaces are to be provided with space
heating
accessory occupancy ✔Correct Answer-space or room that is ancillary to the main occupancy but
does not exceed 10% of the floor area of the main occupancy
, For office buildings, the overall building is allowed to use how many watts per square foot to power
the interior lighting for the entire building ✔Correct Answer-.79
Covers labeling programs and specifies the procedures and principles that third-party certifiers or
ecolabelers must follow? ✔Correct Answer-ISO14024
ASHRAE 62 ✔Correct Answer-specific standard for ventilation for ensuring acceptable indoor air
quality (IAQ)
ASHRAE/IESNA Standard 90.1 ✔Correct Answer-Energy Standard for Buildings Except Low-Rise
Residential Buildings
ISO (International Standards Organization) ✔Correct Answer-independent, non-governmental
international organization with a membership of 164 national standards bodies.
ISO14020 ✔Correct Answer-describes a set of guiding principles for the development and use of
environmental labels and declarations by any practitioner of environmental labeling
What attributes does the BIFMA e3, Furniture Sustainability Standard consider when addressing
sustainability? ✔Correct Answer-material utilization, energy impacts, ecosystem health, social
responsibility.
Which occupancy group is most restrictive? ✔Correct Answer-assembly occupancy
Pictograms ✔Correct Answer-shall have a field height of 6 inches (150 mm) minimum. Characters
and braille shall not be located in the pictogram field.
Glazing in fire rated partitions, doors or sidelights may not exceed how many sq in/cm²? ✔Correct
Answer-100 sq in
The minimum number of toilet fixtures required for an interior design remodeling is determined by:
✔Correct Answer-occupant load and occupancy group
design process can be thought of as three phases ✔Correct Answer-analysis, synthesis, and
implementation
Synthesis Phase ✔Correct Answer-where the parts are pulled together to form a solution and
develop your design intentions
Analysis Phase ✔Correct Answer-the problem is identified, researched, dissected, and analyzed
When do Warranties typically commence (go into effect)? ✔Correct Answer-on the date of
substantial completion
What are the four broad categories of energy efficiency strategies? ✔Correct Answer-Building
commissioning, mechanical systems, electricity use, and plumbing.
The circulation of a building is included in what square foot calculation total? ✔Correct Answer-
Occupant area
