NCIDQ - Plans, Elevations, Sections Exam with all
Correct & 100% Verified Answers |Guaranteed to Pass
The full extent of slab-to-slab partitions is best shown on which of the following:
A) reflected ceiling plan
B) interior elevations
C) wall section details
D) finish plan ✔Correct Answer-A) reflected ceiling plan; this type of plan shows any items that are
part of, touch, or go through the ceiling, as well as the ceiling construction itself
CDs are usually organized in what order? ✔Correct Answer-Floor plans, RCPs, Elevations, Details,
MEPs
Interior designers most often use floor plans dimensioned to which of the following:
A) centerlines of partitions
B) finish face of partitions
C) face of studs/structural components
D) centerline of structural walls + finish faces of partitions ✔Correct Answer-B) finish face of
partitions
Drawings for ONLY the 20th floor of a multi-story commercial office building would most likely use
which notation for the CD set?
A) A1, A2, A3, A4...
B) A1.1, A1.2, A1.3, A1.4...
C) A20.1, A20.2, A20.3, A20.4....
D) A1.20, A2.20, A3.20, A4.20... ✔Correct Answer-C) because the "A20" denotes which floor the
drawings correlate with and the numbers after the decimal further indicate the drawing type
What type of drawing is BEST used to show more detailed dimensions and clearances if they cannot
fit on the floorplan? ✔Correct Answer-Enlarged floor plan
What would be indicated about a particular gypsum wallboard in the drawings? Select all the apply.
A) edge treatment
B) fastener spacing
C) stud depth
D) wallboard thickness ✔Correct Answer-A, C, and D. Fastener spacing would be part of the
specifications, not the drawings.
Which of the following schedules is MOST likely to be included in an interior designers' CD set? select
all that apply.
A) luminaire schedule
B) bathroom accessory schedule
C) door schedule
D) equipment schedule
Correct & 100% Verified Answers |Guaranteed to Pass
The full extent of slab-to-slab partitions is best shown on which of the following:
A) reflected ceiling plan
B) interior elevations
C) wall section details
D) finish plan ✔Correct Answer-A) reflected ceiling plan; this type of plan shows any items that are
part of, touch, or go through the ceiling, as well as the ceiling construction itself
CDs are usually organized in what order? ✔Correct Answer-Floor plans, RCPs, Elevations, Details,
MEPs
Interior designers most often use floor plans dimensioned to which of the following:
A) centerlines of partitions
B) finish face of partitions
C) face of studs/structural components
D) centerline of structural walls + finish faces of partitions ✔Correct Answer-B) finish face of
partitions
Drawings for ONLY the 20th floor of a multi-story commercial office building would most likely use
which notation for the CD set?
A) A1, A2, A3, A4...
B) A1.1, A1.2, A1.3, A1.4...
C) A20.1, A20.2, A20.3, A20.4....
D) A1.20, A2.20, A3.20, A4.20... ✔Correct Answer-C) because the "A20" denotes which floor the
drawings correlate with and the numbers after the decimal further indicate the drawing type
What type of drawing is BEST used to show more detailed dimensions and clearances if they cannot
fit on the floorplan? ✔Correct Answer-Enlarged floor plan
What would be indicated about a particular gypsum wallboard in the drawings? Select all the apply.
A) edge treatment
B) fastener spacing
C) stud depth
D) wallboard thickness ✔Correct Answer-A, C, and D. Fastener spacing would be part of the
specifications, not the drawings.
Which of the following schedules is MOST likely to be included in an interior designers' CD set? select
all that apply.
A) luminaire schedule
B) bathroom accessory schedule
C) door schedule
D) equipment schedule
