Advanced Rigging, Transformer Connections,
Transformer Troubleshooting (mixed
questions With Correct Answers 2026/2027)
The weight exerted by a _____ force load will vary according to difference conditions
a. static
b. dynamic
c.fixed - CORRECT ANSWER -b. dynamic
True or false: A pole is an example of a static force load - CORRECT ANSWER -True
True or false: A transformer is an example of a dynamic force loadTr - CORRECT ANSWER -False
The pulling force of a conductor as it tends to pull a pole or structure in line with adjacent poled
or structures is called _________ tension - CORRECT ANSWER -bisect
True or false: Bisect tension can only be determined for a cover pole that has conductor spans
of equal length on either side - CORRECT ANSWER -False
True or false: For rigging, the minimum safety factor recommended is 10. - CORRECT ANSWER -
False
What is the safety factor for a job in which a rope with a capacity of 10,000 pounds is being
used to lift a 2,000 pound load.
a. 3
b. 4
c. 5
, d. 10 - CORRECT ANSWER -c. 5
True or false: Guy tension is the tension exerted by guy wires to offset line tension or bisect
tension - CORRECT ANSWER -True
When conductors are moved to a taller pole, the weight exerted by the conductors will..
a. increase
b. decrease
c. increase only when the conductor is changed
d. decrease because the conductors are further from the ground - CORRECT ANSWER -a.
increase
How much guy tension is required for a guy wire to offset 190lbs of bisect tension if the guy
wire is 60 ft long and is connected to an anchor that is 40ft away from the base of a pole
a. 11,400lbs
b. 285lbs
c. 127lbs
d. 456lbs - CORRECT ANSWER -b. 285lbs
True or false: The maximum conductor lift possible, without applying undue strain to the tie
wires at the adjacent poles, occurs when the lowest point of a conductor sag is right at the
adjacent poles - CORRECT ANSWER -False
In order to establish a safety factor of 5, what should be the minimum capacity of the rigging
used to lift a conductor that can exert a maximum downward force of 140lbs?
a. 140lbs
b. 145lbs
c. 280lbs
Transformer Troubleshooting (mixed
questions With Correct Answers 2026/2027)
The weight exerted by a _____ force load will vary according to difference conditions
a. static
b. dynamic
c.fixed - CORRECT ANSWER -b. dynamic
True or false: A pole is an example of a static force load - CORRECT ANSWER -True
True or false: A transformer is an example of a dynamic force loadTr - CORRECT ANSWER -False
The pulling force of a conductor as it tends to pull a pole or structure in line with adjacent poled
or structures is called _________ tension - CORRECT ANSWER -bisect
True or false: Bisect tension can only be determined for a cover pole that has conductor spans
of equal length on either side - CORRECT ANSWER -False
True or false: For rigging, the minimum safety factor recommended is 10. - CORRECT ANSWER -
False
What is the safety factor for a job in which a rope with a capacity of 10,000 pounds is being
used to lift a 2,000 pound load.
a. 3
b. 4
c. 5
, d. 10 - CORRECT ANSWER -c. 5
True or false: Guy tension is the tension exerted by guy wires to offset line tension or bisect
tension - CORRECT ANSWER -True
When conductors are moved to a taller pole, the weight exerted by the conductors will..
a. increase
b. decrease
c. increase only when the conductor is changed
d. decrease because the conductors are further from the ground - CORRECT ANSWER -a.
increase
How much guy tension is required for a guy wire to offset 190lbs of bisect tension if the guy
wire is 60 ft long and is connected to an anchor that is 40ft away from the base of a pole
a. 11,400lbs
b. 285lbs
c. 127lbs
d. 456lbs - CORRECT ANSWER -b. 285lbs
True or false: The maximum conductor lift possible, without applying undue strain to the tie
wires at the adjacent poles, occurs when the lowest point of a conductor sag is right at the
adjacent poles - CORRECT ANSWER -False
In order to establish a safety factor of 5, what should be the minimum capacity of the rigging
used to lift a conductor that can exert a maximum downward force of 140lbs?
a. 140lbs
b. 145lbs
c. 280lbs
