1|Page
G-44 Storage and Holding of LPG/CNG EXAM
2026/2027 Actual Complete Real Verified Exam
Questions and Correct Answers (Verified Answers)
Graded A+|| Verified Exam!!!
The pressure relief device must communicate with the X
and be vented to the atmosphere by a method that will
withstand the X pressure which will result - Answer-fuel,
maximum
Pressure relief devices must be located so that the
temperature to which they are subjected is X of the
temperature to which the cylinder is subjected. - Answer-
representative
All tubing must be a minimum of Type X Stainless Steel -
Answer-304
Stainless Steel industrial type connectors having a
minimum design pressure of X psig. - Answer-5,000
Piping, tubing, fittings, and other piping components
between a cylinder or pressure vessel and the first shutoff
,2|Page
valve must be capable of withstanding a hydrostatic test of
at least X times the rated working pressure without
structural failure. - Answer-four
Piping must be American Standard Testing Material
(ASTM) steel, Schedule X, or better. All pipe fittings must
be forged steel stamped X or greater. - Answer-80, 6,000
psi
Fuel supply cylinders must have a rated service pressure
of not less than X psig at X degrees - Answer-2,400, 70
Cascade storage cylinders must have a rated service
pressure of not less than X psig at X degrees Fahrenheit -
Answer-3,600, 70
Steel cylinders must be manufactured and tested in
compliance with X specifications. - Answer-DOT 3AA
Fiber reinforced plastic and full composite cylinders must
comply with X standard. - Answer-DOT FRP1
, 3|Page
Fiber reinforced plastic and hoop wrapped composite
cylinders must comply with X standard - Answer-DOT
FRP2
Vapor recovery receivers must have a minimum rated
service pressure of X psig - Answer-250
The pressure relief device must communicate with the fuel
and be vented to the atmosphere by a method that will
withstand the X pressure which will result - Answer-
maximum
All tubing connectors must be a minimum of Type X
Stainless Steel industrial type connectors having a
minimum design pressure of X - Answer-304, 5,000 psig.
Shutoff valves must have a design working pressure not
less than the X working pressure of the entire system and
must be capable of withstanding a hydrostatic test of at
least X times the rated service pressure without failure. -
Answer-rated, four
G-44 Storage and Holding of LPG/CNG EXAM
2026/2027 Actual Complete Real Verified Exam
Questions and Correct Answers (Verified Answers)
Graded A+|| Verified Exam!!!
The pressure relief device must communicate with the X
and be vented to the atmosphere by a method that will
withstand the X pressure which will result - Answer-fuel,
maximum
Pressure relief devices must be located so that the
temperature to which they are subjected is X of the
temperature to which the cylinder is subjected. - Answer-
representative
All tubing must be a minimum of Type X Stainless Steel -
Answer-304
Stainless Steel industrial type connectors having a
minimum design pressure of X psig. - Answer-5,000
Piping, tubing, fittings, and other piping components
between a cylinder or pressure vessel and the first shutoff
,2|Page
valve must be capable of withstanding a hydrostatic test of
at least X times the rated working pressure without
structural failure. - Answer-four
Piping must be American Standard Testing Material
(ASTM) steel, Schedule X, or better. All pipe fittings must
be forged steel stamped X or greater. - Answer-80, 6,000
psi
Fuel supply cylinders must have a rated service pressure
of not less than X psig at X degrees - Answer-2,400, 70
Cascade storage cylinders must have a rated service
pressure of not less than X psig at X degrees Fahrenheit -
Answer-3,600, 70
Steel cylinders must be manufactured and tested in
compliance with X specifications. - Answer-DOT 3AA
Fiber reinforced plastic and full composite cylinders must
comply with X standard. - Answer-DOT FRP1
, 3|Page
Fiber reinforced plastic and hoop wrapped composite
cylinders must comply with X standard - Answer-DOT
FRP2
Vapor recovery receivers must have a minimum rated
service pressure of X psig - Answer-250
The pressure relief device must communicate with the fuel
and be vented to the atmosphere by a method that will
withstand the X pressure which will result - Answer-
maximum
All tubing connectors must be a minimum of Type X
Stainless Steel industrial type connectors having a
minimum design pressure of X - Answer-304, 5,000 psig.
Shutoff valves must have a design working pressure not
less than the X working pressure of the entire system and
must be capable of withstanding a hydrostatic test of at
least X times the rated service pressure without failure. -
Answer-rated, four
