Comptia A+ Certification Practice Test 1 (Exam 220-901)
Study online at https://quizlet.com/_j5gk9a
1. True or False True
The main functionality of the Basic Input/Output Sys-
tem (BIOS) is to perform the initial hardware checks
after the computer is powered on and start up the
operating system.
2. What two things can be used by an Operating System Device Drivers
to communicate with hardware?
System BIOS
3. In modern PCs, the procedure of replacing BIOS con- Flashing the BIOS
tents is sometimes referred to as:
4. BIOS updates are performed in order to Fix known programming
errors in the current BIOS
Repair damaged BIOS
Provide support for new
types of attached hardware
5. What are the terms that refer to BIOS types that can EEPROM
be updated without removing the BIOS chip from a
motherboard? Flash Memory
6. Which Microsoft Windows OS utility can be used to MSINFO32.exe
view basic information about computer's BIOS?
7. True or False True
1/5
, Comptia A+ Certification Practice Test 1 (Exam 220-901)
Study online at https://quizlet.com/_j5gk9a
Power failure during BIOS upgrade can be the cause
of irreversible damage to the computer system.
8. After a normal system shutdown, when the computer Retained
is turned off, contents of the memory used to store
BIOS settings are:
9. What is the acronym that refers to a series of basic POST (Power On Self Test)
hardware diagnostic tests performed by the startup
BIOS after the computer is powered on?
10. After replacing a modular hardware component in- CMOS RAM
side computer case, the updated information about
specific parameters of the new device can be stored
Flash Memory
in:
11. After completing the initial diagnostics and assigning Boot Sequence
system resources, the startup BIOS program checks
for information about secondary storage devices that
might contain the OS. The list of devices and the order
in which they should be checked can be found and
arranged in the CMOS setup utility, and this option is
commonly referred to as:
12. In order to work, an integrated component such as Enabled in the advanced
Network Interface Card (NIC) on a newly assembled BIOS settings menu
computer system may need to be first:
13. After launching Windows Virtual PC application tech- Getting into the CMOS
nician receives error message stating that the Hard- setup utility and enabling
ware-Assisted Virtualization (HAV) feature is not en- the virtualization technolo-
gy setting
2/5
Study online at https://quizlet.com/_j5gk9a
1. True or False True
The main functionality of the Basic Input/Output Sys-
tem (BIOS) is to perform the initial hardware checks
after the computer is powered on and start up the
operating system.
2. What two things can be used by an Operating System Device Drivers
to communicate with hardware?
System BIOS
3. In modern PCs, the procedure of replacing BIOS con- Flashing the BIOS
tents is sometimes referred to as:
4. BIOS updates are performed in order to Fix known programming
errors in the current BIOS
Repair damaged BIOS
Provide support for new
types of attached hardware
5. What are the terms that refer to BIOS types that can EEPROM
be updated without removing the BIOS chip from a
motherboard? Flash Memory
6. Which Microsoft Windows OS utility can be used to MSINFO32.exe
view basic information about computer's BIOS?
7. True or False True
1/5
, Comptia A+ Certification Practice Test 1 (Exam 220-901)
Study online at https://quizlet.com/_j5gk9a
Power failure during BIOS upgrade can be the cause
of irreversible damage to the computer system.
8. After a normal system shutdown, when the computer Retained
is turned off, contents of the memory used to store
BIOS settings are:
9. What is the acronym that refers to a series of basic POST (Power On Self Test)
hardware diagnostic tests performed by the startup
BIOS after the computer is powered on?
10. After replacing a modular hardware component in- CMOS RAM
side computer case, the updated information about
specific parameters of the new device can be stored
Flash Memory
in:
11. After completing the initial diagnostics and assigning Boot Sequence
system resources, the startup BIOS program checks
for information about secondary storage devices that
might contain the OS. The list of devices and the order
in which they should be checked can be found and
arranged in the CMOS setup utility, and this option is
commonly referred to as:
12. In order to work, an integrated component such as Enabled in the advanced
Network Interface Card (NIC) on a newly assembled BIOS settings menu
computer system may need to be first:
13. After launching Windows Virtual PC application tech- Getting into the CMOS
nician receives error message stating that the Hard- setup utility and enabling
ware-Assisted Virtualization (HAV) feature is not en- the virtualization technolo-
gy setting
2/5
