Final Exam CETA ETA Test Questions
With 100% Correct Solutions.
When did the CET certification program begin - Answer 1965
When did ETA initiate certification maintenance? - Answer 1996
All ETA certification categories require the passage of the associate CET Examination? - Answer
False
To qualify for Master CET, the examiner must attain a score of 85% on each separate exam -
Answer False
an associate CET cannot attempt one of the specialty exams? - Answer False
master CET is lifetime and does not require re certification? - Answer True
The journeyman level: - Answer 75% passing, 2 years of work, and specialization
Certification maintenance requires payment of a fee and retesting or proving at least 40 hours
of upgrade retraining within a four year period - Answer True
a worker may become certified by ETA as a CST without also becomming certified as a CET? -
Answer True
The associate CET exam may be taken after the journeyman exam - Answer False
B+, or supply voltages in electronics products, is considered to be: - Answer +12 to 300 VDC
Leakage current in an electronic product, between either of the AC power cord conductors and
the chassis or any exposed metal parts should not exceed____ - Answer 500 microamps
Shaded components on the electronics schematics mean: - Answer only exact replacement
parts may be used
Ingested solder fumes or particles _____ - Answer are toxic
, Second degree skin burns should _____. - Answer not be treated with ice and bandage pack
rules describing the fire or toxicity retardant types of cabling which may be installed in buildings
is contained in: - Answer NEC Article 770
ESD and static discharge is most destructive to _______. - Answer CMOS semiconductors
If you have never received formal training and practiced CPR on a person or dummy, in the
event of finding a fellow worker not breathing, you ___ - Answer should not attempt it, but
call for help
when working at heights above 6 feet, a _____ is required by OSHA rules. - Answer full body
harness attached to a lanyard which prevents more than a 6' drop
residual voltage is associated with ______. - Answer charge retained by capacitors
The atomic number of an element is the same as the element atomic weight - Answer False
An increase in voltage with resistance held constant cause current to ____ - Answer Increase
The ampere, expresses ____ - Answer a unit of charge movement per second past a given
point
The total resistance of a parallel circuit containing equal branch resistance is found by the
following: - Answer By dividing the resistance value of a branch by the number of branches
Maximum power transfer occurs when the load impedance is equal to the source impedance -
Answer True
What will happen to the current through a resistor if the resistor value increases - Answer
current decreases
Which type of circuit has the same voltage drop across each component - Answer parallel
Total power in a series circuit is determined by the: - Answer A. Source voltage times the
current
With 100% Correct Solutions.
When did the CET certification program begin - Answer 1965
When did ETA initiate certification maintenance? - Answer 1996
All ETA certification categories require the passage of the associate CET Examination? - Answer
False
To qualify for Master CET, the examiner must attain a score of 85% on each separate exam -
Answer False
an associate CET cannot attempt one of the specialty exams? - Answer False
master CET is lifetime and does not require re certification? - Answer True
The journeyman level: - Answer 75% passing, 2 years of work, and specialization
Certification maintenance requires payment of a fee and retesting or proving at least 40 hours
of upgrade retraining within a four year period - Answer True
a worker may become certified by ETA as a CST without also becomming certified as a CET? -
Answer True
The associate CET exam may be taken after the journeyman exam - Answer False
B+, or supply voltages in electronics products, is considered to be: - Answer +12 to 300 VDC
Leakage current in an electronic product, between either of the AC power cord conductors and
the chassis or any exposed metal parts should not exceed____ - Answer 500 microamps
Shaded components on the electronics schematics mean: - Answer only exact replacement
parts may be used
Ingested solder fumes or particles _____ - Answer are toxic
, Second degree skin burns should _____. - Answer not be treated with ice and bandage pack
rules describing the fire or toxicity retardant types of cabling which may be installed in buildings
is contained in: - Answer NEC Article 770
ESD and static discharge is most destructive to _______. - Answer CMOS semiconductors
If you have never received formal training and practiced CPR on a person or dummy, in the
event of finding a fellow worker not breathing, you ___ - Answer should not attempt it, but
call for help
when working at heights above 6 feet, a _____ is required by OSHA rules. - Answer full body
harness attached to a lanyard which prevents more than a 6' drop
residual voltage is associated with ______. - Answer charge retained by capacitors
The atomic number of an element is the same as the element atomic weight - Answer False
An increase in voltage with resistance held constant cause current to ____ - Answer Increase
The ampere, expresses ____ - Answer a unit of charge movement per second past a given
point
The total resistance of a parallel circuit containing equal branch resistance is found by the
following: - Answer By dividing the resistance value of a branch by the number of branches
Maximum power transfer occurs when the load impedance is equal to the source impedance -
Answer True
What will happen to the current through a resistor if the resistor value increases - Answer
current decreases
Which type of circuit has the same voltage drop across each component - Answer parallel
Total power in a series circuit is determined by the: - Answer A. Source voltage times the
current
