RVTI Exam Questions and Answers (Verified
Answers) ||ACTUAL EXAM 2026 TEST!! Graded A+
| 2026 EXAM UPDATE
Save
Terms in this set (88)
where is the regulator in relation to Downstream
the container?
what does the first stage of the approximately 10
regulator reduce the pressure to? lb/in2 gauge (PSIG)
what does the second stage of the 11 in WC
regulator reduce the pressure too?
each magnet on a trailer brae system 3.2 amps max
should draw how many amps?
what kind of lube should be used for dry lube
slideouts?
a class II hitch is rated for? Class II hitches are weight carrying (WC) hitches
rated up to 3500 lbs. gross trailer weight (GTW)
with a maximum trailer tongue weight (TW) of 300
lbs.
, when performing a lockup test barbed fitting on the test device
where should you put the
manometer?
what position should the sweep seal na Inspect for proper contact with slide-out wall,
be in? roof, and floor; verify good contact with each
sealing surface; no rotting or cracks and tears in
rubber components
to operate the leveling system what parking brake
position should the brakes be in?
should you use vise grips on no
propane tanks
where is the automatic change over inbetween two propane containers
regulator found?
on a new trailer the drums are seated after the first 200 miles of operation
after how many braking
applications?
What is the purpose of a propane to reduce the pressure of the propane
regulator?
What does it mean when you have a Means it's a hung wall
grid pattern on a laminated sidewall? Fiberglass is glued to the stud work
where should a motorhomes exhaust Sticking out slightly past the back of the home
pipes be in relation to the back of
the motorhome?
Answers) ||ACTUAL EXAM 2026 TEST!! Graded A+
| 2026 EXAM UPDATE
Save
Terms in this set (88)
where is the regulator in relation to Downstream
the container?
what does the first stage of the approximately 10
regulator reduce the pressure to? lb/in2 gauge (PSIG)
what does the second stage of the 11 in WC
regulator reduce the pressure too?
each magnet on a trailer brae system 3.2 amps max
should draw how many amps?
what kind of lube should be used for dry lube
slideouts?
a class II hitch is rated for? Class II hitches are weight carrying (WC) hitches
rated up to 3500 lbs. gross trailer weight (GTW)
with a maximum trailer tongue weight (TW) of 300
lbs.
, when performing a lockup test barbed fitting on the test device
where should you put the
manometer?
what position should the sweep seal na Inspect for proper contact with slide-out wall,
be in? roof, and floor; verify good contact with each
sealing surface; no rotting or cracks and tears in
rubber components
to operate the leveling system what parking brake
position should the brakes be in?
should you use vise grips on no
propane tanks
where is the automatic change over inbetween two propane containers
regulator found?
on a new trailer the drums are seated after the first 200 miles of operation
after how many braking
applications?
What is the purpose of a propane to reduce the pressure of the propane
regulator?
What does it mean when you have a Means it's a hung wall
grid pattern on a laminated sidewall? Fiberglass is glued to the stud work
where should a motorhomes exhaust Sticking out slightly past the back of the home
pipes be in relation to the back of
the motorhome?
