47203W_02 Hazardous Materials Technician
Final Exam (2026) Exam Questions & Answers |
Latest
Save
Terms in this set (170)
During an incident critique, Be used to improve their response to the next
responders identified several hazardous materials incident
shortcomings in their SOPS. This
information should:
Identify all the people who should Hazmat Response Team, IMS Officers, Incident
be present at an incident debriefing Commander, Information Officers
You have just written the critique Circulate the report to allow everyone in the
record for an incident where response system to share the lessons learned.
several responders were badly
burned. The next step is to:
Although normally very effective, Faulty Batteries, Interference, and enclosed
two-way radio communication can spaces.
fail. Identify THREE causes of
problems with two-way radio
communications
The primary hazard you'll Corrosivity
encounter when removing product
from an MC-312/DOT-412 cargo
tank is:
, If you respond to an incident Class B foam-alcohol resistant concentrate
involving an MC-306/DOT-406
carrying ethanol-blended gasoline,
you'll need to suppress the fire
using:
An MC-306/DOT-406 cargo tank is plugging with small pine plugs
found to be leaking gasoline from a
number of small, regular punctures.
The easiest method of stopping the
leaks would be:
One important safety consideration is non-sparking
for choosing power or hand tools
for product removal/transfer
operations is whether the tool:
To fix a leaking pressure relief valve Apply the hood assembly
gasket on a chlorine rail tank car,
you could tighten the stud nuts OR:
A valve/plug assembly should be Replace a missing plug
used to:
Proper care of tools and equipment Thoroughly washing all parts with a chlorine
used to control hazardous materials bleach solution
releases includes all of the
following EXCEPT:
When grounding a damaged tank, Low enough on the grounding rod so that foam,
place the clamp: if used, will build up around the clamp
The object of bonding is to: Keep objects at the same electrical potential,
decreasing or eliminating any chance of a static
spark
Final Exam (2026) Exam Questions & Answers |
Latest
Save
Terms in this set (170)
During an incident critique, Be used to improve their response to the next
responders identified several hazardous materials incident
shortcomings in their SOPS. This
information should:
Identify all the people who should Hazmat Response Team, IMS Officers, Incident
be present at an incident debriefing Commander, Information Officers
You have just written the critique Circulate the report to allow everyone in the
record for an incident where response system to share the lessons learned.
several responders were badly
burned. The next step is to:
Although normally very effective, Faulty Batteries, Interference, and enclosed
two-way radio communication can spaces.
fail. Identify THREE causes of
problems with two-way radio
communications
The primary hazard you'll Corrosivity
encounter when removing product
from an MC-312/DOT-412 cargo
tank is:
, If you respond to an incident Class B foam-alcohol resistant concentrate
involving an MC-306/DOT-406
carrying ethanol-blended gasoline,
you'll need to suppress the fire
using:
An MC-306/DOT-406 cargo tank is plugging with small pine plugs
found to be leaking gasoline from a
number of small, regular punctures.
The easiest method of stopping the
leaks would be:
One important safety consideration is non-sparking
for choosing power or hand tools
for product removal/transfer
operations is whether the tool:
To fix a leaking pressure relief valve Apply the hood assembly
gasket on a chlorine rail tank car,
you could tighten the stud nuts OR:
A valve/plug assembly should be Replace a missing plug
used to:
Proper care of tools and equipment Thoroughly washing all parts with a chlorine
used to control hazardous materials bleach solution
releases includes all of the
following EXCEPT:
When grounding a damaged tank, Low enough on the grounding rod so that foam,
place the clamp: if used, will build up around the clamp
The object of bonding is to: Keep objects at the same electrical potential,
decreasing or eliminating any chance of a static
spark
