CWB LEVEL 1 MODULE 4 PROCESSES FINAL
REVIEW 2026 ACCURATE ANSWERS
GRADED A+
⩥ 6" (15 cm). Answer: When the electrode is gripped in the torch
handle, the electrode tip should be no further from the heads than ___.
⩥ A rare-earth metal. Answer: Electrodes designed for A-CAC use are
copper coated and contain an arc-stabilizing ingredient referred to as
___.
⩥ That the carbon arc electrodes to be used are completely dry.. Answer:
One of the procedures to prevent fires or explosions during A-CAC work
is to make sure ___.
⩥ The power conductor. Answer: An A-CAC concentric system has
compressed air passing through ___.
⩥ By removing objects and projections from the surface. Answer:
Washing is a process used to prepare the surface of the base metal ____.
⩥ It may be possible to replace only the damaged portion. Answer: If an
electrode holder becomes cracked or worn, ___.
REVIEW 2026 ACCURATE ANSWERS
GRADED A+
⩥ 6" (15 cm). Answer: When the electrode is gripped in the torch
handle, the electrode tip should be no further from the heads than ___.
⩥ A rare-earth metal. Answer: Electrodes designed for A-CAC use are
copper coated and contain an arc-stabilizing ingredient referred to as
___.
⩥ That the carbon arc electrodes to be used are completely dry.. Answer:
One of the procedures to prevent fires or explosions during A-CAC work
is to make sure ___.
⩥ The power conductor. Answer: An A-CAC concentric system has
compressed air passing through ___.
⩥ By removing objects and projections from the surface. Answer:
Washing is a process used to prepare the surface of the base metal ____.
⩥ It may be possible to replace only the damaged portion. Answer: If an
electrode holder becomes cracked or worn, ___.
