DCSA SPeD- Physical Security Certification (PSC)
exam with answers, Exams of Security Analysis
Before you can conduct a risk analysis based on the impact and
likelihood of an unwanted event happening, what steps in the risk
management process must you take first? Identify (3) -
ANSWERIdentify assets
Identify threats
Identify vulnerabilities
Which policy should you consult to find the physical security
requirements of protecting classified information? - ANSWERDoDM
5200.01, Volumes 1-4 DoD Information Security Program
Which policy authorizes commanders to issue regulations for the
protection or security of property and places under their command? -
ANSWERDoDI 5200.08, Security of DoD Installations and Resources
and the DoD Physical
Security Review Board (PSRB)
Which of the following individuals should be included in a Threat
Working Group? - ANSWERChemical, biological, radiological, nuclear
and high yield explosive representative, Information operations
representative, Operations security officer, Law enforcement,
Counterintelligence, Antiterrorism Officer
,Which of these can be made of solid steel to make them more attack
resistant? - ANSWERDoors
Which of these house ventilation systems that should be secured with
steel bars? - ANSWERRoofs
Which of these should be covered with a protective film to make
them less dangerous in an attack? - ANSWERWindows
Which of the following locks are approved to secure classified
information or material? - ANSWERKaba Mas X-10, S&G 8077/AD
At a minimum _________ should include special and general guard
orders, access and material control, protective barriers, lighting
systems, locks, and Intrusion Detection Systems (IDS). -
ANSWERPhysical Security Plans
Assets fall into 5 categories, name all 5 of them. - ANSWER1. People
2. Information
3. Equipment
4. Facilities and
5. Activities and Operations
Who provides construction and security
requirements for SCIFs? - ANSWERDirector of National Intelligence
(DNI)
,Who provides accreditation for SCIFs? - ANSWERDefense Intelligence
Agency (DIA)
They are used by the intelligence community to store classified
information. - ANSWERSCIFs are used by the intelligence community
to store
classified information called Sensitive Compartmented Information
(SCI).
Warning signs must be posted at each boundary of a restricted area
and must be conspicuous to those approaching on foot or by vehicle.
T/F - ANSWERTrue
The use of master key systems is acceptable in the storage of AA&E. -
ANSWERFalse. The use of master key systems is not authorized in
AA&E storage facilities.
The first line of defense in any physical security system is usually some
form of? - ANSWERperimeter protection system
What kind of fencing is used when a stationary perimeter requires
protection? - ANSWERPermanent
What kind of fencing can be used as a temporary perimeter to
establish psychological barriers and to channel pedestrian and vehicle
movement. - ANSWERTemporary
The basic manual access control system is simply? - ANSWERpersonal
recognition.
, Although there are many different types of locks, they all share three
components. - ANSWERLocking device
Switching device
Operating mechanism
Some key-operated locks are built into the door or container they are
securing. These are also known as - ANSWERMortise locks, because
their case is recessed, or mortised into a door or container.
The __________________ is the most common of all door locks in use
today. - ANSWERcylindrical lock
What kind of locks are used for securing classified information? -
ANSWERElectromechanical combination locks
When a container is taken out of service, the combination must be
reset back to the factory settings. The factory setting for a built-in
container lock is? - ANSWER50-25-50.
You just received a security container that has the S&G 2740
Electromechanical Safe Lock with a factory setting of 50-25-50. What
should you do first? - ANSWERCalibrate the lock
Certification and accreditation (C&A) for Storage of Classified DoD
Information Systems.
A. DoD Manual 5100.76M governs the C&A for Storage of Classified
DoD Information Systems.
exam with answers, Exams of Security Analysis
Before you can conduct a risk analysis based on the impact and
likelihood of an unwanted event happening, what steps in the risk
management process must you take first? Identify (3) -
ANSWERIdentify assets
Identify threats
Identify vulnerabilities
Which policy should you consult to find the physical security
requirements of protecting classified information? - ANSWERDoDM
5200.01, Volumes 1-4 DoD Information Security Program
Which policy authorizes commanders to issue regulations for the
protection or security of property and places under their command? -
ANSWERDoDI 5200.08, Security of DoD Installations and Resources
and the DoD Physical
Security Review Board (PSRB)
Which of the following individuals should be included in a Threat
Working Group? - ANSWERChemical, biological, radiological, nuclear
and high yield explosive representative, Information operations
representative, Operations security officer, Law enforcement,
Counterintelligence, Antiterrorism Officer
,Which of these can be made of solid steel to make them more attack
resistant? - ANSWERDoors
Which of these house ventilation systems that should be secured with
steel bars? - ANSWERRoofs
Which of these should be covered with a protective film to make
them less dangerous in an attack? - ANSWERWindows
Which of the following locks are approved to secure classified
information or material? - ANSWERKaba Mas X-10, S&G 8077/AD
At a minimum _________ should include special and general guard
orders, access and material control, protective barriers, lighting
systems, locks, and Intrusion Detection Systems (IDS). -
ANSWERPhysical Security Plans
Assets fall into 5 categories, name all 5 of them. - ANSWER1. People
2. Information
3. Equipment
4. Facilities and
5. Activities and Operations
Who provides construction and security
requirements for SCIFs? - ANSWERDirector of National Intelligence
(DNI)
,Who provides accreditation for SCIFs? - ANSWERDefense Intelligence
Agency (DIA)
They are used by the intelligence community to store classified
information. - ANSWERSCIFs are used by the intelligence community
to store
classified information called Sensitive Compartmented Information
(SCI).
Warning signs must be posted at each boundary of a restricted area
and must be conspicuous to those approaching on foot or by vehicle.
T/F - ANSWERTrue
The use of master key systems is acceptable in the storage of AA&E. -
ANSWERFalse. The use of master key systems is not authorized in
AA&E storage facilities.
The first line of defense in any physical security system is usually some
form of? - ANSWERperimeter protection system
What kind of fencing is used when a stationary perimeter requires
protection? - ANSWERPermanent
What kind of fencing can be used as a temporary perimeter to
establish psychological barriers and to channel pedestrian and vehicle
movement. - ANSWERTemporary
The basic manual access control system is simply? - ANSWERpersonal
recognition.
, Although there are many different types of locks, they all share three
components. - ANSWERLocking device
Switching device
Operating mechanism
Some key-operated locks are built into the door or container they are
securing. These are also known as - ANSWERMortise locks, because
their case is recessed, or mortised into a door or container.
The __________________ is the most common of all door locks in use
today. - ANSWERcylindrical lock
What kind of locks are used for securing classified information? -
ANSWERElectromechanical combination locks
When a container is taken out of service, the combination must be
reset back to the factory settings. The factory setting for a built-in
container lock is? - ANSWER50-25-50.
You just received a security container that has the S&G 2740
Electromechanical Safe Lock with a factory setting of 50-25-50. What
should you do first? - ANSWERCalibrate the lock
Certification and accreditation (C&A) for Storage of Classified DoD
Information Systems.
A. DoD Manual 5100.76M governs the C&A for Storage of Classified
DoD Information Systems.
