SFFMA FF1, FF2, and Hazmat Question Practice Examination Questions and Correct Answers (Verified Answers) Plus Rationales 2027 Q&A | Instant Download Pdf

SFFMA FF1, FF2, and Hazmat Question Practice Examination Questions and Correct Answers (Verified Answers) Plus Rationales 2027 Q&A | Instant Download Pdf How is control of the saw maintained? - ANSWER -Account for the twisting caused by spinning blade. When entering a building, carefully reposition pike pole and carry it: - ANSWER -With head upright. How are wooden handles of forcible entry tools preserved? - ANSWER -A coat of boiled linseed oil. Damage when forcing a door can be justified by severity of emergency and: - ANSWER -Speed needed for entry. Most hinges on swinging doors are mounted on ____ that permits swinging in one or both direction. - ANSWER -One side. When forcing a inward swinging door, use another technique if the door is: - ANSWER -Metal or metal-clad. Where on a door should a firefighter strike to break a tempered plate glass door? - ANSWER -Bottom corner. Which of the following has one or two panels that slide into an adjacent wall? - ANSWER -Interior pocket door. Cutting padlocks is a proper was to force entry on: - ANSWER -Security doors. The type of forcible entry used on fire doors is similar to forcing: - ANSWER Overhead or sliding doors. Forcing the wrong window in a structure can: - ANSWER -Draw fire into uninvolved sections. When performing forcible entry on casement windows, the first step is to: - ANSWER -Break lowest pane of glass. Which of the following types of windows has double-strength glass? - ANSWER -Awning. Which of the following should be used to force entry with a rotary saw on a high security window? - ANSWER -Carbide-tipped, medium-toothed blade. Which of the following is MOST accurate about using a rotary saw to breach a metal wall? - ANSWER -Have charged hoseline available in case of sparks. A chain-link fence should be cut quickly with a: - ANSWER -Rotary saw. What is one way that fire service ladders are different from ladders for private industry or general use? - ANSWER -Fire service ladders provide greater margin of safety. Which of the following BEST describes the butt of the ladder? - ANSWER -The bottom end of the ladder. Which of the following BEST describes the halyard? - ANSWER -Rope or cable used for hoisting and lowering fly sections. What is the term for the cross members that extend from one beam to the other and provide a foothold for climbing? - ANSWER -Rungs. Whats the most common material used for fire service ladders? - ANSWER Aluminum. Which of the following statements about heat sensor labels is MOST accurate? - ANSWER -Heat sensors are preset to change color at 300 F (149 C). Which of the following BEST describes an extension ladder? - ANSWER Comprised of a base section and one or more fly sections, can be adjusted to specific length needed. Which type of ladder is designed to be used as a self-supporting stepladder and as a single or extension ladder? - ANSWER -Combination ladder. Pumper apparatus are required by NFPA 1901 to carry one folding ladder, one roof ladder, and: - ANSWER -One extension ladder. NFPA 1901 requires quint apparatus to carry a minimum of ____ of ground ladders of the same types required for pumper apparatus. - ANSWER -85 feet (26 m) Which of the following statements about inspecting ladder elements is MOST accurate? - ANSWER -Discoloration of fiberglass ladders could indicate heat exposure. Ground ladders should be service tested before being placed in service, ____ while in service, and after use that exposes the ladder to high heat or rough treatment. - ANSWER -Once each year. Which of the following statements about ladder maintenance is MOST accurate? - ANSWER -Routine ladder maintenance may be performed by firefighters. Which of the following BEST describes the two means of escape required when personnel are working on a roof or upper story? - ANSWER -At least two ladders located at remote locations from one another.