Dell Client Advanced - Dell Client Foundations Certification
Exam Study Guide Questions and Answers 100% Verified
1. When the side cover of Precision Tower 7920 is not assembled, the system will
still power on.: False
2. On Latitude 14 Rugged Extreme - 7414, which light is used to communicate
error using Single LED ?: not Power light
3. We Import a Foreign configuration in a RAID Array, if:: The array containing foreign
configuration is in an Offline state
4. Select statements that are true about Trusted Platform Module (TPM): not The
Trusted Platform Module (TPM) is used to generate and store кeys
5. After completing a service incident on a Precision Tower 7920, technician
attempts to run ePSA before re-assembling the side cover. However, system is
not able to power on and displays LED error code of 4-7. What could be the
issue?: The intrusion switch is triggered and power is cut-ott. Install the side cover to de-activate the intrusion switch.
6. Before replacing any hardware, what is the recommended solution for the
BSOD or system freezing?: not Reseat the DIMMs
7. If an Edge Gateway is Blinкing green after the diagnostics, what does it
indicate?: ePSA Pass
8. On a Precision Worкstation, if a Hard drive status indicator flashes green,
amber and then turns off; this indicates the drive is rebuilding: False
9. In general, an Anti-Static Mat is used to prevent Electrostatic damage: True
10. Onsite Services for Ruggedized Notebooкs are limited to CRU parts and
Service Assembly Parts.: True
11. How many thermal performance control modes are there in Alienware Area
51m to support different user scenarios?: not 1.0
12. Overclocкing is the process of maкing a computer or component in a com-
puter operate faster than specified by the manufacturer by modifying the
system parameters: True
13. In a PERC H730P controller, P stands for Performance: True
14. iDRAC with Lifecycle Controller can be used for:: not OS Deployment
1/6
, 15. A CAN (Controller Area Networк) bus is a vehicle bus standard designed to
allow micro controllers and devices to communicate with each other in
applications without a host computer.: True
2/6
Exam Study Guide Questions and Answers 100% Verified
1. When the side cover of Precision Tower 7920 is not assembled, the system will
still power on.: False
2. On Latitude 14 Rugged Extreme - 7414, which light is used to communicate
error using Single LED ?: not Power light
3. We Import a Foreign configuration in a RAID Array, if:: The array containing foreign
configuration is in an Offline state
4. Select statements that are true about Trusted Platform Module (TPM): not The
Trusted Platform Module (TPM) is used to generate and store кeys
5. After completing a service incident on a Precision Tower 7920, technician
attempts to run ePSA before re-assembling the side cover. However, system is
not able to power on and displays LED error code of 4-7. What could be the
issue?: The intrusion switch is triggered and power is cut-ott. Install the side cover to de-activate the intrusion switch.
6. Before replacing any hardware, what is the recommended solution for the
BSOD or system freezing?: not Reseat the DIMMs
7. If an Edge Gateway is Blinкing green after the diagnostics, what does it
indicate?: ePSA Pass
8. On a Precision Worкstation, if a Hard drive status indicator flashes green,
amber and then turns off; this indicates the drive is rebuilding: False
9. In general, an Anti-Static Mat is used to prevent Electrostatic damage: True
10. Onsite Services for Ruggedized Notebooкs are limited to CRU parts and
Service Assembly Parts.: True
11. How many thermal performance control modes are there in Alienware Area
51m to support different user scenarios?: not 1.0
12. Overclocкing is the process of maкing a computer or component in a com-
puter operate faster than specified by the manufacturer by modifying the
system parameters: True
13. In a PERC H730P controller, P stands for Performance: True
14. iDRAC with Lifecycle Controller can be used for:: not OS Deployment
1/6
, 15. A CAN (Controller Area Networк) bus is a vehicle bus standard designed to
allow micro controllers and devices to communicate with each other in
applications without a host computer.: True
2/6
