AMMUNITION HANDLERS (CERT) 1 EXAM QUESTIONS ANSWERED CORRECTLY LATEST UPDATE 2026

AMMUNITION HANDLERS (CERT) 1 EXAM QUESTIONS ANSWERED CORRECTLY LATEST UPDATE 2026 You need to store a box of unused grenades a unit returned after training. Which publication will use for guidance on safely moving and storing this AE? - Answers DA PAM 385-64, Ammunition and Explosives Safety Standards You are tasked with unitizing several AE containers. Which publication do you use? - Answers AMC 19-48 drawings What are the correct actions for these AE handling tasks? - Answers You will: Comply with official requirements, Use only authorized tools With Caution: Repair AE containers with nails You will not: Drag or throw AE Containers, use bail hooks Where in an AMC 19-48 publication will you find general storage instructions and cautions? - Answers General Notes Where in an AMC 19-48 drawing can you find a visual representation of different types of stacks? - Answers Drawings Match the AE type to its associated hazard. - Answers Improved Conventional Munitions: Blast and Fragmentation Black Powder: Hazardous if absorbs moisture Pyrotechnics: Deteriorate due to age Rockets: Deteriorate due to high or low temperatures Match the chemical group to its associated hazard. - Answers Group A: Toxic Group B: Skin irritation Group C: Combustible when exposed to air Group D: Smoke inhalation What are the three standards of safe chemical munitions handling? - Answers Do not drop or jar Do not store on wood or porous floors Handle carefully What three actions do you take with unknown or questionable AE? - Answers Mark Clearly Put on a pallet (if possible) Separate from other AE You prevent shifting when moving a pallet of AE by ensuring the load is - Answers Secured together What are three requirements for using MHE? - Answers Complying with the MHE licensing program Receiving AE handling hazard training Reviewing and signing SOPs Which type of Magazine is considered the standard magazine? - Answers Aboveground magazine Which symbol is needed to warn first responders of a fire hazard with a chance of mass detonation? - Answers Choose the "1" Which symbol is needed to warn first responders of a chemical hazard involving riot control agents and smoke? - Answers Choose the "yellow" one What provides the drawings used to determine proper stacking arrangements? - Answers AMC 19-48 Using the compatibility table, which group is not compatible with any other? - Answers Group L Using the compatibility table, which three groups have limited compatibility with Group D? - Answers Group E Group F Group G Storage magazines containing ammunition with which security risk categories require Intrusion Detection Systems (IDS)? - Answers CAT I and CAT II Which of these is a requirement for controlling AE locks and keys? - Answers If a key its lock must be replaced immediately. On the Magazine Data Card, blocks A-E are used to record what? - Answers Local use information, such as grid location of CIIC Match the sections of DD Form 626 with their content - Answers Section I: Documentation Verification Section II: Mechanical Inspection Section III: Post Loading Inspection DD Form 626, Section II focuses on what aspect of vehicle inspection? - Answers Mechanical inspection When inspecting a vehicle using Section II of DD Form 626 before transporting ammunition, which item would cause the vehicle to fail and be marked deficient? - Answers Cracked driver's side mirror Which of the following types of shipping papers must a vehicle operator carry? - Answers Safety Data Sheet DD Form 2890 DD Form 2781 Excerpts of the Emergency Response Guidebook As an ammunition handler ,you will use DA Form 3151 - Answers To identify the specific ammunition and quantities issued to the unit. Which regulation covers the Army AE management program, procedures, and references? - Answers DA PAM 700-16 Whose responsibility it is to authenticate an ammunition request using DA Form 581 and the assumption of command orders? - Answers ASP ammunition handler ASP customer service The ammunition issuance and receipt process consists of eight steps. Match each step to its associated process. - Answers Step 1: Unit Requests Issue Step 2: ASP Clerk Authenticates Request Step 3: Stock Control Selects AE Step 4: Surveillance Clears the selected AE Step 5: ASP Personnel Inspect the vehicle Step 6: ASP Personnel Cross-check and load AE Step 7:ASP Vehicle Inspectors Verify Load Safety Step 8: ASP Clerk gives paperwork to the unit Which form is used by units to request an issue of ammunition? - Answers DA Form 581 Which form is used to track shortages of ammunition and residue at turn-in? - Answers DA Form 5811 DA Form 3151 is generated using the information from which form provided by the unit? - Answers DA Form 581 What is the intention of an AE Amnesty Program? - Answers Ensure maximum recovery of military ammunition and residue While creating an SOP, you need to check explosives safety standards for a magazine to hold fragmentation grenades. Which publication should you use? - Answers DA PAM 385-64 (CORRECT) What does an SOP's Index of Operations cover? - Answers Sequential list of each operation in the SOP including description and total explosives allowed (CORRECT) You need to mark a package that contains blasting caps with identifying information (nomenclature, lot number, etc.) Which publication do you use? - Answers MIL-STD-129R (CORRECT) What is the National Stock Number for this AE package? - Answers (CORRECT) What is the Department of Defense Identification Code (DODIC) for this AE Package? - Answers N278 (CORRECT) A136 What is the Lot Number for this AE package? - Answers WCC97D025-021 (CORRECT) MA-79E001-013 What is the nomenclature for this AE package? - Answers CTGS, 7.62MM M118 CARTONS? What is the quantity of AE for this package? - Answers 2000 (CORRECT) 2000 You need to find an AE item's controlled item inventory code (CIIC), but you don't have a lot of time. Which publication do you use? - Answers Yellow Book