South Carolina Collision Damage
Estimator Certification License Exam
Practice Questions And Correct Answers
(Verified Answers) Plus Rationale 2026
Q&A| Instant Download Pdf
1. In vehicle collision estimation, what does “OE” stand for when
referring to parts?
A. Optional Equipment
B. Original Equipment
C. Outside Estimate
D. Overhead Expense
OE refers to parts manufactured by the original auto maker for that
specific vehicle model.
2. When estimating a vehicle loss, what is the primary purpose of
scanning the vehicle for Active Safety Systems?
A. To determine paint match requirements
B. To identify components that require recalibration after repair
C. To decide if the tires need replacement
D. To record pre-loss mileage
Active Safety Systems like ADAS must be identified for recalibration
to ensure safe return to service.
3. What does the term “R&I” mean in collision estimating?
A. Replace and Inspect
B. Repair and Inventory
C. Remove and Install
D. Refinish and Integrate
, R&I refers to removing a part then installing a new or repaired part
as part of the labor calculation.
4. In structural repair, what is the purpose of measuring fixture points?
A. To locate the paint code
B. To determine if the frame is out of specification
C. To estimate tire wear
D. To assess interior upholstery damage
Fixture points are reference dimensions to check if the frame or
unibody is within manufacturer tolerances.
5. When estimating, why is it important to verify corrosion protection
before sealing joints?
A. To increase labor hours
B. To prevent future rust and corrosion issues
C. To improve sound system performance
D. To justify part replacement
Corrosion protection maintains the manufacturer’s rust prevention
integrity after repair.
6. Which material often requires specialized welds and procedures
during repair?
A. Standard steel
B. Aluminum
C. Plastic trim
D. Glass
Aluminum has different metallurgical properties requiring special
welds and equipment.
7. What does “OEM” parts quality indicate?
A. Off-brand replacement
B. Manufacturers’ specified parts
C. Aftermarket generic parts
D. Used salvage parts
OEM parts are those made to the vehicle manufacturer’s original
specifications.
8. What is the first step in the estimating process after receiving a
damaged vehicle?
A. Preparing the invoice
, B. Performing a thorough damage inspection
C. Ordering parts
D. Reviewing the insurance policy
Inspecting the vehicle establishes all visible and hidden damage
before drafting the estimate.
9. In paint estimating, what is the purpose of “feather-edge blending”?
A. To replace the entire panel
B. To smoothly transition new paint into existing paint
C. To avoid using primer
D. To reduce labor costs
Blending ensures the repaired area matches the undamaged
adjacent paint finish.
10. What is a common unit of measure for body labor in collision
estimating?
A. Dollars per tire
B. Hours
C. Color codes
D. Square feet
Labor time is measured in hours to calculate body work cost.
11. How does scanning for VIN-specific calibrations affect an
estimate?
A. It reduces materials cost
B. It identifies necessary calibrations and software updates
C. It determines market value
D. It verifies title status
VIN scans reveal safety systems and calibrations mandated by the
OEM after repair.
12. Which condition would most likely require structural
straightening?
A. Damaged radio antenna
B. Collision impact to the unibody frame rails
C. Scuffed door panel
D. Foggy headlights
Structural damage to frame components requires straightening on
specialized equipment.
Estimator Certification License Exam
Practice Questions And Correct Answers
(Verified Answers) Plus Rationale 2026
Q&A| Instant Download Pdf
1. In vehicle collision estimation, what does “OE” stand for when
referring to parts?
A. Optional Equipment
B. Original Equipment
C. Outside Estimate
D. Overhead Expense
OE refers to parts manufactured by the original auto maker for that
specific vehicle model.
2. When estimating a vehicle loss, what is the primary purpose of
scanning the vehicle for Active Safety Systems?
A. To determine paint match requirements
B. To identify components that require recalibration after repair
C. To decide if the tires need replacement
D. To record pre-loss mileage
Active Safety Systems like ADAS must be identified for recalibration
to ensure safe return to service.
3. What does the term “R&I” mean in collision estimating?
A. Replace and Inspect
B. Repair and Inventory
C. Remove and Install
D. Refinish and Integrate
, R&I refers to removing a part then installing a new or repaired part
as part of the labor calculation.
4. In structural repair, what is the purpose of measuring fixture points?
A. To locate the paint code
B. To determine if the frame is out of specification
C. To estimate tire wear
D. To assess interior upholstery damage
Fixture points are reference dimensions to check if the frame or
unibody is within manufacturer tolerances.
5. When estimating, why is it important to verify corrosion protection
before sealing joints?
A. To increase labor hours
B. To prevent future rust and corrosion issues
C. To improve sound system performance
D. To justify part replacement
Corrosion protection maintains the manufacturer’s rust prevention
integrity after repair.
6. Which material often requires specialized welds and procedures
during repair?
A. Standard steel
B. Aluminum
C. Plastic trim
D. Glass
Aluminum has different metallurgical properties requiring special
welds and equipment.
7. What does “OEM” parts quality indicate?
A. Off-brand replacement
B. Manufacturers’ specified parts
C. Aftermarket generic parts
D. Used salvage parts
OEM parts are those made to the vehicle manufacturer’s original
specifications.
8. What is the first step in the estimating process after receiving a
damaged vehicle?
A. Preparing the invoice
, B. Performing a thorough damage inspection
C. Ordering parts
D. Reviewing the insurance policy
Inspecting the vehicle establishes all visible and hidden damage
before drafting the estimate.
9. In paint estimating, what is the purpose of “feather-edge blending”?
A. To replace the entire panel
B. To smoothly transition new paint into existing paint
C. To avoid using primer
D. To reduce labor costs
Blending ensures the repaired area matches the undamaged
adjacent paint finish.
10. What is a common unit of measure for body labor in collision
estimating?
A. Dollars per tire
B. Hours
C. Color codes
D. Square feet
Labor time is measured in hours to calculate body work cost.
11. How does scanning for VIN-specific calibrations affect an
estimate?
A. It reduces materials cost
B. It identifies necessary calibrations and software updates
C. It determines market value
D. It verifies title status
VIN scans reveal safety systems and calibrations mandated by the
OEM after repair.
12. Which condition would most likely require structural
straightening?
A. Damaged radio antenna
B. Collision impact to the unibody frame rails
C. Scuffed door panel
D. Foggy headlights
Structural damage to frame components requires straightening on
specialized equipment.
