EPA section 608 Type 1 Exam (2026)
UPDATE Verified Questions and Answers
_ With 100- Correct Answers graded A+
Guaranteed Success!!
The EPA definition of a small appliance includes: -CORRECTANSWER Products
manufactured, charged and hermetically sealed in a factory with 5lbs of refrigerant or
less
RECOVERY equipment manufactured before Nov. 15, 1993 must be capable of
removing——— of the refrigerant whether or not the compressor is operating, or
achieve a 4" vacuum under the conditions of ARI 740. -CORRECTANSWER 80%
What is necessary to know before beginning recovery of refrigerant? -
CORRECTANSWER The type of refrigerant to be recovered
RECOVERY equipment manufactured after Nov. 15, 1993 must be capable of
recovering———- of the refrigerant if the compressor is not operating. -
CORRECTANSWER 80%
Self contained recovery equipment is also known as: -CORRECTANSWER Active
, The EPA requires all small appliance leaks be repaired when? -CORRECTANSWER
Whenever possible, but isn't required
When filling a graduated charging cylinder with a regulated refrigerant, the refrigerant
vapor that is vented off the top of the cylinder: -CORRECTANSWER Must be recovered
A RECOVERY machine that is manufactured after Nov. 15, 1993 must be certified by
whom? -CORRECTANSWER An EPA approved agency
System dependent recovery uses what to recover the refrigerant? -
CORRECTANSWER The refrigeration systems compressor
If EPA regulations change after a Service Technician passes the EPA section 608
certification exam: -CORRECTANSWER The tech is responsible to keep up with any
changes in the law.
RECOVERY equipment manufactured after Nov. 15,1993 must be capable of
recovering———— of the refrigerant if the compressor is operating. -
CORRECTANSWER 90%
All RECOVERY Equipment must be equipped with what? -CORRECTANSWER Low
loss fittings, either manual or automatic
UPDATE Verified Questions and Answers
_ With 100- Correct Answers graded A+
Guaranteed Success!!
The EPA definition of a small appliance includes: -CORRECTANSWER Products
manufactured, charged and hermetically sealed in a factory with 5lbs of refrigerant or
less
RECOVERY equipment manufactured before Nov. 15, 1993 must be capable of
removing——— of the refrigerant whether or not the compressor is operating, or
achieve a 4" vacuum under the conditions of ARI 740. -CORRECTANSWER 80%
What is necessary to know before beginning recovery of refrigerant? -
CORRECTANSWER The type of refrigerant to be recovered
RECOVERY equipment manufactured after Nov. 15, 1993 must be capable of
recovering———- of the refrigerant if the compressor is not operating. -
CORRECTANSWER 80%
Self contained recovery equipment is also known as: -CORRECTANSWER Active
, The EPA requires all small appliance leaks be repaired when? -CORRECTANSWER
Whenever possible, but isn't required
When filling a graduated charging cylinder with a regulated refrigerant, the refrigerant
vapor that is vented off the top of the cylinder: -CORRECTANSWER Must be recovered
A RECOVERY machine that is manufactured after Nov. 15, 1993 must be certified by
whom? -CORRECTANSWER An EPA approved agency
System dependent recovery uses what to recover the refrigerant? -
CORRECTANSWER The refrigeration systems compressor
If EPA regulations change after a Service Technician passes the EPA section 608
certification exam: -CORRECTANSWER The tech is responsible to keep up with any
changes in the law.
RECOVERY equipment manufactured after Nov. 15,1993 must be capable of
recovering———— of the refrigerant if the compressor is operating. -
CORRECTANSWER 90%
All RECOVERY Equipment must be equipped with what? -CORRECTANSWER Low
loss fittings, either manual or automatic
