what kind of valve is located between the boiler and a safety valve?
Give this one a try later!
none
No joint anchorages or guides shall be repaired, replaced or relocated without a
work permit issued by the department. This shall not apply to the repacking of a ___ or
___ joint.
Give this one a try later!
Ball or slip joint
,importance of water column?
Give this one a try later!
To get steam temp, pressure, boiler level, to attach glass gage so that level
can be read easily
what are the allowed tapings of a water column?
Give this one a try later!
feed water regulator, damper regulator, drain, steam gage
a safety valve over 3" and over 15 psig shall have what type of inlet connection?
Give this one a try later!
flanged or welded
Who shall design the boiler system?
Give this one a try later!
The Professional Engineer or the Architect
,What if someone is found not following the rules and regulations for gas piping
inspections?
Give this one a try later!
Revocation of license
repairs to safety valves must be performed by an organization in possession of a
Give this one a try later!
National board VR (valve repair) certificate
Electric boilers have two or more safety valves at a power output of _____ kW?
Give this one a try later!
1100 kW
what is the flame index of insulation?
Give this one a try later!
25 flame index
, how do you protect potable feed water for a boiler?
Give this one a try later!
pressure vacuum breaker
when would a heat exchanger not need shut off valves?
Give this one a try later!
when it is integral with the boiler
What is the minimum face size of a non mercury gage?
Give this one a try later!
2-1/4"
who witnesses gas piping inspections?
Give this one a try later!
an authorized plumbing inspector, or licensed PE, or master plumber, or
architect
Give this one a try later!
none
No joint anchorages or guides shall be repaired, replaced or relocated without a
work permit issued by the department. This shall not apply to the repacking of a ___ or
___ joint.
Give this one a try later!
Ball or slip joint
,importance of water column?
Give this one a try later!
To get steam temp, pressure, boiler level, to attach glass gage so that level
can be read easily
what are the allowed tapings of a water column?
Give this one a try later!
feed water regulator, damper regulator, drain, steam gage
a safety valve over 3" and over 15 psig shall have what type of inlet connection?
Give this one a try later!
flanged or welded
Who shall design the boiler system?
Give this one a try later!
The Professional Engineer or the Architect
,What if someone is found not following the rules and regulations for gas piping
inspections?
Give this one a try later!
Revocation of license
repairs to safety valves must be performed by an organization in possession of a
Give this one a try later!
National board VR (valve repair) certificate
Electric boilers have two or more safety valves at a power output of _____ kW?
Give this one a try later!
1100 kW
what is the flame index of insulation?
Give this one a try later!
25 flame index
, how do you protect potable feed water for a boiler?
Give this one a try later!
pressure vacuum breaker
when would a heat exchanger not need shut off valves?
Give this one a try later!
when it is integral with the boiler
What is the minimum face size of a non mercury gage?
Give this one a try later!
2-1/4"
who witnesses gas piping inspections?
Give this one a try later!
an authorized plumbing inspector, or licensed PE, or master plumber, or
architect
