CCT Kahoot Exam with all Correct & 100% Verified
Answers |Latest Version |Already Graded A+
Which two statements about fiber cable are true?
-Fiber cable is inexpensive and supports a higher data rate than coaxial
-Mulitimode cable supports speeds between 100 Mbps and 100 Gpbs.
-Single-mode fiber supports SC and LC connectors only.
-Single-mode cable is most appropriate for installations longer than 10 km. ✔Correct Answer--
Fiber cable is inexpensive and supports a higher data rate than coaxial
-Mulitimode cable supports speeds between 100 Mbps and 100 Gpbs.
Which step in the router boot process searches for an IOS image to load into the router?
-bootstrap
-POST
-mini-IOS
-ROMMON mode ✔Correct Answer-bootstrap
Which IEEE standard protocol is initiated as a result of successful DTP completion in a switch over
Fast Ethernet?
-802.1Q
-802.1D
-802.3ad
-802.1w ✔Correct Answer-802.1Q
Which IOS layer does a server use to keep track of which application communications in which
conversation?
-transport
-network
-session
-application ✔Correct Answer-session
Which two of the following statements are true? (Choose two)
-FTP requires authentication, a router must be configured with UID and pass
-A router can act as an FTP server.
-FTP uses UDP as its transport protocol.
-FTP can be used to load Cisco IOS software to router in ROMMON mode. ✔Correct Answer--FTP
requires authentication, a router must be configured with UID and pass
-A router can act as an FTP server.
Which two pairs of LAN Ethernet devices use an RJ-45 Straight-through cable? (Choose two)
-switch to router
-switch to server
-switch to switch
-switch to hub ✔Correct Answer--switch to router
-switch to server
Which two of the following statements are true? (Choose two)
-The Cisco logo, can be found on the front bezel of all Cisco products
-At the network module level, the model number is the same as the part number
, -OEM products that are built for Cisco never get a Cisco logo applied.
-Serial numbers are attached by label on all Cisco field-replaceable parts. ✔Correct Answer--The
Cisco logo, can be found on the front bezel of all Cisco products
-At the network module level, the model number is the same as the part number
What is the default operating mode you are initially logging into a router? ✔Correct Answer-user
exec
What one of the feature is associated with single-mode fiber-optic cable?
-a single strand of glass fiber
-stored less bandwidth
-cost is less than multimode fiber
-operates over less distance than multimode fiber ✔Correct Answer--a single strand of glass fiber
Which two of the following are component of WAN connection? (Choose two)
-bridge
-router
-CSU/DSU
-switch ✔Correct Answer--router
-CSU/DSU
When using a modem to provide out-of-band access to a Cisco router, which cable type is used to
connect the wall jack to
-RJ-11 to Rj-11
-DB-25 to RJ-11
-RJ-11 to RJ-45
-RJ-11 to DB-9 ✔Correct Answer--RJ-11 to Rj-11
Which statement about unique local IP addresses is true?
-Summarization is not supported.
-heir global IDs are assigned sequentially.
-They require all prefixes to be unique.
-They are routable to the public Internet. ✔Correct Answer-they require all prefixes to be unique
What does the CD LED indicate on the voice WAN interface card?
-an alarm condition
-receive signal strength
-a carrier has been detected
-the interface is in loopback mode ✔Correct Answer-- a carrier has been detected
Which sequence begins a unique local IP address in binary notation? ✔Correct Answer-11111110
Which two commands are used to set the configuration register value? (Choose two)
-Router(config)#config-register 0x2102
-rommon>config-register 0x2102
-Router(config)#confreg 0x2102
-rommon>confreg 0x2102 ✔Correct Answer-rommon>confreg 0x2102
Router(config)#config-register 0x2102
Which two sets of pins are looped on an RJ-45 loopback plug Choose two
-1 and 4
Answers |Latest Version |Already Graded A+
Which two statements about fiber cable are true?
-Fiber cable is inexpensive and supports a higher data rate than coaxial
-Mulitimode cable supports speeds between 100 Mbps and 100 Gpbs.
-Single-mode fiber supports SC and LC connectors only.
-Single-mode cable is most appropriate for installations longer than 10 km. ✔Correct Answer--
Fiber cable is inexpensive and supports a higher data rate than coaxial
-Mulitimode cable supports speeds between 100 Mbps and 100 Gpbs.
Which step in the router boot process searches for an IOS image to load into the router?
-bootstrap
-POST
-mini-IOS
-ROMMON mode ✔Correct Answer-bootstrap
Which IEEE standard protocol is initiated as a result of successful DTP completion in a switch over
Fast Ethernet?
-802.1Q
-802.1D
-802.3ad
-802.1w ✔Correct Answer-802.1Q
Which IOS layer does a server use to keep track of which application communications in which
conversation?
-transport
-network
-session
-application ✔Correct Answer-session
Which two of the following statements are true? (Choose two)
-FTP requires authentication, a router must be configured with UID and pass
-A router can act as an FTP server.
-FTP uses UDP as its transport protocol.
-FTP can be used to load Cisco IOS software to router in ROMMON mode. ✔Correct Answer--FTP
requires authentication, a router must be configured with UID and pass
-A router can act as an FTP server.
Which two pairs of LAN Ethernet devices use an RJ-45 Straight-through cable? (Choose two)
-switch to router
-switch to server
-switch to switch
-switch to hub ✔Correct Answer--switch to router
-switch to server
Which two of the following statements are true? (Choose two)
-The Cisco logo, can be found on the front bezel of all Cisco products
-At the network module level, the model number is the same as the part number
, -OEM products that are built for Cisco never get a Cisco logo applied.
-Serial numbers are attached by label on all Cisco field-replaceable parts. ✔Correct Answer--The
Cisco logo, can be found on the front bezel of all Cisco products
-At the network module level, the model number is the same as the part number
What is the default operating mode you are initially logging into a router? ✔Correct Answer-user
exec
What one of the feature is associated with single-mode fiber-optic cable?
-a single strand of glass fiber
-stored less bandwidth
-cost is less than multimode fiber
-operates over less distance than multimode fiber ✔Correct Answer--a single strand of glass fiber
Which two of the following are component of WAN connection? (Choose two)
-bridge
-router
-CSU/DSU
-switch ✔Correct Answer--router
-CSU/DSU
When using a modem to provide out-of-band access to a Cisco router, which cable type is used to
connect the wall jack to
-RJ-11 to Rj-11
-DB-25 to RJ-11
-RJ-11 to RJ-45
-RJ-11 to DB-9 ✔Correct Answer--RJ-11 to Rj-11
Which statement about unique local IP addresses is true?
-Summarization is not supported.
-heir global IDs are assigned sequentially.
-They require all prefixes to be unique.
-They are routable to the public Internet. ✔Correct Answer-they require all prefixes to be unique
What does the CD LED indicate on the voice WAN interface card?
-an alarm condition
-receive signal strength
-a carrier has been detected
-the interface is in loopback mode ✔Correct Answer-- a carrier has been detected
Which sequence begins a unique local IP address in binary notation? ✔Correct Answer-11111110
Which two commands are used to set the configuration register value? (Choose two)
-Router(config)#config-register 0x2102
-rommon>config-register 0x2102
-Router(config)#confreg 0x2102
-rommon>confreg 0x2102 ✔Correct Answer-rommon>confreg 0x2102
Router(config)#config-register 0x2102
Which two sets of pins are looped on an RJ-45 loopback plug Choose two
-1 and 4
