,TESTBANK FOR Manual Drivetrains and Axles, 9th
edition James Halderman
Notes
1- The file is chapter after chapter.
2- We have shown you few pages sample.
3- The file contains all Appendix and Excel sheet
if it exists.
4- We have all what you need, we make update
at every time. There are many new editions
waiting you.
5- If you think you purchased the wrong file You
can contact us at every time, we can replace it
with true one.
Our email:
,Manual Drivetrains and Axles, 9e (Halderman)
Chapter 1 Service Information, Work Orders, and Vehicle Identification
1) What type of information is commonly included in the owner's manual that would be a benefit
to the service technician?
A) Maintenance reminder light reset procedures
B) Tire pressure monitoring system reset procedures
C) Maintenance items specifications
D) All of the above
Answer: D
Page Ref: 1
Objective: 1-1 Discuss the importance of vehicle owner's manuals, service records, and service
information.
2) Two technicians are discussing the need for the history of the vehicle. Technician A says that
an accident could cause faults due to hidden damage. Technician B says that some faults could
be related to a previous repair. Which technician is correct?
A) Technician A only
B) Technician B only
C) Both technicians A and B
D) Neither technician A nor B
Answer: C
Page Ref: 3
Objective: 1-1 Discuss the importance of vehicle owner's manuals, service records, and service
information.
3) A campaign (recall) is mailed to the owner of a vehicle from the ________.
A) vehicle manufacturer
B) local dealer
C) federal government
D) state or local government
Answer: A
Page Ref: 2
Objective: 1-3 Describe vehicle recalls and campaigns.
4) Technical service bulletins (TSBs) are issued by the ________.
A) vehicle manufacturer
B) local dealer
C) federal government
D) state or local government
Answer: A
Page Ref: 2
Objective: 1-3 Describe vehicle recalls and campaigns.
1
Copyright © 2024 Pearson Education, Inc.
,5) Four tenths of an hour is how many minutes?
A) 14
B) 24
C) 34
D) 44
Answer: B
Page Ref: 3
Objective: 1-2 Explain the different types of service information.
6) What should the service technician document on the work order?
A) The results of any inspections and tests
B) What was replaced or serviced
C) The dimensions of the related component and comparison to factory specifications
D) Any of the above
Answer: D
Page Ref: 3
Objective: 1-4 Discuss the importance of the work order.
7) The labor rate for each operation is included on the work order and is added by the ________.
A) service technician
B) service advisor
C) shop owner or designated warranty person
D) Any of the above
Answer: C
Page Ref: 3
Objective: 1-4 Discuss the importance of the work order.
8) Which of the following are performed at no cost to the vehicle owner?
A) TSBs
B) Campaigns (recalls)
C) Either A or B
D) Neither A nor B
Answer: B
Page Ref: 2
Objective: 1-3 Describe vehicle recalls and campaigns.
9) The first character of the vehicle identification number is the country of origin. Where was the
vehicle built that has a "5" as the first character?
A) United States
B) Canada
C) Mexico
D) Japan
Answer: A
Page Ref: 5
Objective: 1-6 Explain vehicle identification, vehicle safety certification label, and the veci
label.
2
Copyright © 2024 Pearson Education, Inc.
,10) The VECI label includes all of these EXCEPT ________.
A) engine identification
B) horsepower and torque rating of the engine
C) California emission standard
D) EPA emission standard
Answer: B
Page Ref: 7
Objective: 1-6 Explain vehicle identification, vehicle safety certification label, and the veci
label.
11) Aftermarket service information is available in what format?
A) Manuals
B) CDs or DVDs
C) Internet
D) All of these are possible source formats.
Answer: D
Page Ref: 2
Objective: 1-2 Explain the different types of service information.
12) What does NOT need to be included on the work order?
A) Vehicle description
B) Miles on the odometer
C) The brand of gasoline used
D) The estimate of the repair
Answer: C
Page Ref: 3
Objective: 1-4 Discuss the importance of the work order.
13) Which type of manual or service information includes the flat rate time and the cost of parts?
A) Labor guides
B) Factory service manuals
C) Component location guides
D) Free Internet sites
Answer: A
Page Ref: 3
Objective: 1-2 Explain the different types of service information.
14) Technician A says that paper factory service manuals covered several years and models.
Technician B says that most aftermarket paper service manuals only covered one year and model
vehicle. Which technician is correct?
A) Technician A only
B) Technician B only
C) Both technicians A and B
D) Neither technician A nor B
Answer: D
Page Ref: 2
Objective: 1-2 Explain the different types of service information.
3
Copyright © 2024 Pearson Education, Inc.
,15) Where can a technician find diagnostic procedures to troubleshoot an electrical problem?
A) Service manual
B) Owners manual
C) Lubrication guide
D) None of these
Answer: A
Page Ref: 2
Objective: 1-2 Explain the different types of service information.
16) What type notification relates to repairs that are always covered by the manufacturer to
correct a safety or emission-related concern?
A) Recall
B) Technical Service Bulletin
C) Both A and B
D) Neither A nor B
Answer: A
Page Ref: 2
Objective: 1-3 Describe vehicle recalls and campaigns.
17) A vehicle is brought in to have an unusual problem repaired. A valuable source of
information that may help the technician repair the problem is ________.
A) the owner's manual
B) a lubrication guide
C) the vehicle service records
D) None of these
Answer: C
Page Ref: 3
Objective: 1-1 Discuss the importance of vehicle owner's manuals, service records, and service
information.
18) The vehicle safety certification label includes all of these EXCEPT ________.
A) VIN
B) GVWR
C) paint code
D) GAWR
Answer: C
Page Ref: 7
Objective: 1-6 Explain vehicle identification, vehicle safety certification label, and the veci
label.
4
Copyright © 2024 Pearson Education, Inc.
,19) A vehicle with the engine in the front can be ________.
A) front-wheel drive
B) rear-wheel drive
C) four-wheel drive
D) Any of these
Answer: D
Page Ref: 5
Objective: 1-5 Discuss the parts of a vehicle, and differentiate between front-wheel drive and
rear-wheel drive.
20) The vehicle safety certification label includes ________.
A) month and year of manufacture
B) gross vehicle weight rating
C) VIN
D) All of these
Answer: D
Page Ref: 7
Objective: 1-6 Explain vehicle identification, vehicle safety certification label, and the veci
label.
21) Which character of the VIN indicates the year of the vehicle?
A) Tenth
B) Eighth
C) First
D) None of these
Answer: A
Page Ref: 6
Objective: 1-6 Explain vehicle identification, vehicle safety certification label, and the veci
label.
22) The passenger side is called ________.
A) the right side
B) the left side
C) either the right or the left side, depending on how the vehicle is viewed
D) Both A and B
Answer: A
Page Ref: 5
Objective: 1-5 Discuss the parts of a vehicle, and differentiate between front-wheel drive and
rear-wheel drive.
5
Copyright © 2024 Pearson Education, Inc.
,Manual Drivetrains and Axles, 9e (Halderman)
Chapter 2 Introduction to Drivetrains
1) Torque is ________.
A) a twisting force
B) the rate of doing work
C) results in motion
D) the gear ratio
Answer: A
Page Ref: 9
Objective: 2-1 Define torque, and explain the relationship between torque and horsepower.
2) Gears can be used to ________.
A) increase speed
B) increase torque
C) reverse direction
D) All of the above
Answer: D
Page Ref: 11
Objective: 2-3 Explain gear ratios and their effect on vehicle operation.
3) If a gear with 20 teeth is driving a gear with 60 teeth, the gear ratio is ________.
A) 2:6
B) 3:1
C) 1:3
D) 0.33:1
Answer: B
Page Ref: 15
Objective: 2-3 Explain gear ratios and their effect on vehicle operation.
4) Technician A says that a helical gear is stronger than a spur gear. Technician B says that a
helical gear is noisier that a spur gear. Which technician is correct?
A) Technician A only
B) Technician B only
C) Both technicians A and B
D) Neither technician A nor B
Answer: D
Page Ref: 13
Objective: 2-2 Describe the various gear types and their effect on speed, torque, and direction
of rotation.
1
Copyright © 2024 Pearson Education, Inc.
,5) Which type of gear may be found in a rear-wheel-drive axle?
A) Hypoid
B) Spiral bevel
C) Spur
D) Helical
Answer: A
Page Ref: 13
Objective: 2-2 Describe the various gear types and their effect on speed, torque, and direction
of rotation.
6) The transmission is in first gear, which has a 2.5:1 ratio, and the rear axle has a ratio of 2:1.
The overall gear ratio is ________.
A) 4.5:1
B) 5:1
C) 2:1
D) 2.5:1
Answer: B
Page Ref: 15
Objective: 2-3 Explain gear ratios and their effect on vehicle operation.
7) The type of gear set used in most automatic transmissions is ________.
A) spur gears
B) planetary gears
C) helical gears
D) Any of the above
Answer: B
Page Ref: 18
Objective: 2-5 Discuss automatic transmissions and the planetary gear sets used for automatic
transmissions.
8) What shift mode should be used when descending a steep hill?
A) Drive (D)
B) Second (2)
C) Neutral (N)
D) Low (L)
Answer: D
Page Ref: 18
Objective: 2-5 Discuss automatic transmissions and the planetary gear sets used for automatic
transmissions.
2
Copyright © 2024 Pearson Education, Inc.
, 9) Full time four-wheel-drive vehicles use ________.
A) a transfer case
B) spiral bevel drive axles
C) three differentials
D) Both A and C
Answer: D
Page Ref: 23
Objective: 2-6 Compare rear-wheel drive, front-wheel drive, four-wheel drive, and all-wheel
drive.
10) What is used to transfer torque to all four wheels?
A) Four driveshafts
B) A transfer case or power transfer unit
C) Four differentials
D) All of the above
Answer: B
Page Ref: 23
Objective: 2-7 Explain the characteristics of driveshafts and drive axle assemblies.
11) The vehicle drivetrain can send power to ________.
A) the front wheels
B) the rear wheels
C) Either A or B
D) Neither A nor B
Answer: C
Page Ref: 20
Objective: 2-6 Compare rear-wheel drive, front-wheel drive, four-wheel drive, and all-wheel
drive.
12) Technician A says that a clutch must engage completely, all at once. Technician B says that
the clutch must slip during engagement. Which technician is correct?
A) Technician A only
B) Technician B only
C) Both technicians A and B
D) Neither technician A nor B
Answer: B
Page Ref: 16
Objective: 2-4 Discuss the types of manual transmissions and transaxles that are currently in
use.
3
Copyright © 2024 Pearson Education, Inc.
edition James Halderman
Notes
1- The file is chapter after chapter.
2- We have shown you few pages sample.
3- The file contains all Appendix and Excel sheet
if it exists.
4- We have all what you need, we make update
at every time. There are many new editions
waiting you.
5- If you think you purchased the wrong file You
can contact us at every time, we can replace it
with true one.
Our email:
,Manual Drivetrains and Axles, 9e (Halderman)
Chapter 1 Service Information, Work Orders, and Vehicle Identification
1) What type of information is commonly included in the owner's manual that would be a benefit
to the service technician?
A) Maintenance reminder light reset procedures
B) Tire pressure monitoring system reset procedures
C) Maintenance items specifications
D) All of the above
Answer: D
Page Ref: 1
Objective: 1-1 Discuss the importance of vehicle owner's manuals, service records, and service
information.
2) Two technicians are discussing the need for the history of the vehicle. Technician A says that
an accident could cause faults due to hidden damage. Technician B says that some faults could
be related to a previous repair. Which technician is correct?
A) Technician A only
B) Technician B only
C) Both technicians A and B
D) Neither technician A nor B
Answer: C
Page Ref: 3
Objective: 1-1 Discuss the importance of vehicle owner's manuals, service records, and service
information.
3) A campaign (recall) is mailed to the owner of a vehicle from the ________.
A) vehicle manufacturer
B) local dealer
C) federal government
D) state or local government
Answer: A
Page Ref: 2
Objective: 1-3 Describe vehicle recalls and campaigns.
4) Technical service bulletins (TSBs) are issued by the ________.
A) vehicle manufacturer
B) local dealer
C) federal government
D) state or local government
Answer: A
Page Ref: 2
Objective: 1-3 Describe vehicle recalls and campaigns.
1
Copyright © 2024 Pearson Education, Inc.
,5) Four tenths of an hour is how many minutes?
A) 14
B) 24
C) 34
D) 44
Answer: B
Page Ref: 3
Objective: 1-2 Explain the different types of service information.
6) What should the service technician document on the work order?
A) The results of any inspections and tests
B) What was replaced or serviced
C) The dimensions of the related component and comparison to factory specifications
D) Any of the above
Answer: D
Page Ref: 3
Objective: 1-4 Discuss the importance of the work order.
7) The labor rate for each operation is included on the work order and is added by the ________.
A) service technician
B) service advisor
C) shop owner or designated warranty person
D) Any of the above
Answer: C
Page Ref: 3
Objective: 1-4 Discuss the importance of the work order.
8) Which of the following are performed at no cost to the vehicle owner?
A) TSBs
B) Campaigns (recalls)
C) Either A or B
D) Neither A nor B
Answer: B
Page Ref: 2
Objective: 1-3 Describe vehicle recalls and campaigns.
9) The first character of the vehicle identification number is the country of origin. Where was the
vehicle built that has a "5" as the first character?
A) United States
B) Canada
C) Mexico
D) Japan
Answer: A
Page Ref: 5
Objective: 1-6 Explain vehicle identification, vehicle safety certification label, and the veci
label.
2
Copyright © 2024 Pearson Education, Inc.
,10) The VECI label includes all of these EXCEPT ________.
A) engine identification
B) horsepower and torque rating of the engine
C) California emission standard
D) EPA emission standard
Answer: B
Page Ref: 7
Objective: 1-6 Explain vehicle identification, vehicle safety certification label, and the veci
label.
11) Aftermarket service information is available in what format?
A) Manuals
B) CDs or DVDs
C) Internet
D) All of these are possible source formats.
Answer: D
Page Ref: 2
Objective: 1-2 Explain the different types of service information.
12) What does NOT need to be included on the work order?
A) Vehicle description
B) Miles on the odometer
C) The brand of gasoline used
D) The estimate of the repair
Answer: C
Page Ref: 3
Objective: 1-4 Discuss the importance of the work order.
13) Which type of manual or service information includes the flat rate time and the cost of parts?
A) Labor guides
B) Factory service manuals
C) Component location guides
D) Free Internet sites
Answer: A
Page Ref: 3
Objective: 1-2 Explain the different types of service information.
14) Technician A says that paper factory service manuals covered several years and models.
Technician B says that most aftermarket paper service manuals only covered one year and model
vehicle. Which technician is correct?
A) Technician A only
B) Technician B only
C) Both technicians A and B
D) Neither technician A nor B
Answer: D
Page Ref: 2
Objective: 1-2 Explain the different types of service information.
3
Copyright © 2024 Pearson Education, Inc.
,15) Where can a technician find diagnostic procedures to troubleshoot an electrical problem?
A) Service manual
B) Owners manual
C) Lubrication guide
D) None of these
Answer: A
Page Ref: 2
Objective: 1-2 Explain the different types of service information.
16) What type notification relates to repairs that are always covered by the manufacturer to
correct a safety or emission-related concern?
A) Recall
B) Technical Service Bulletin
C) Both A and B
D) Neither A nor B
Answer: A
Page Ref: 2
Objective: 1-3 Describe vehicle recalls and campaigns.
17) A vehicle is brought in to have an unusual problem repaired. A valuable source of
information that may help the technician repair the problem is ________.
A) the owner's manual
B) a lubrication guide
C) the vehicle service records
D) None of these
Answer: C
Page Ref: 3
Objective: 1-1 Discuss the importance of vehicle owner's manuals, service records, and service
information.
18) The vehicle safety certification label includes all of these EXCEPT ________.
A) VIN
B) GVWR
C) paint code
D) GAWR
Answer: C
Page Ref: 7
Objective: 1-6 Explain vehicle identification, vehicle safety certification label, and the veci
label.
4
Copyright © 2024 Pearson Education, Inc.
,19) A vehicle with the engine in the front can be ________.
A) front-wheel drive
B) rear-wheel drive
C) four-wheel drive
D) Any of these
Answer: D
Page Ref: 5
Objective: 1-5 Discuss the parts of a vehicle, and differentiate between front-wheel drive and
rear-wheel drive.
20) The vehicle safety certification label includes ________.
A) month and year of manufacture
B) gross vehicle weight rating
C) VIN
D) All of these
Answer: D
Page Ref: 7
Objective: 1-6 Explain vehicle identification, vehicle safety certification label, and the veci
label.
21) Which character of the VIN indicates the year of the vehicle?
A) Tenth
B) Eighth
C) First
D) None of these
Answer: A
Page Ref: 6
Objective: 1-6 Explain vehicle identification, vehicle safety certification label, and the veci
label.
22) The passenger side is called ________.
A) the right side
B) the left side
C) either the right or the left side, depending on how the vehicle is viewed
D) Both A and B
Answer: A
Page Ref: 5
Objective: 1-5 Discuss the parts of a vehicle, and differentiate between front-wheel drive and
rear-wheel drive.
5
Copyright © 2024 Pearson Education, Inc.
,Manual Drivetrains and Axles, 9e (Halderman)
Chapter 2 Introduction to Drivetrains
1) Torque is ________.
A) a twisting force
B) the rate of doing work
C) results in motion
D) the gear ratio
Answer: A
Page Ref: 9
Objective: 2-1 Define torque, and explain the relationship between torque and horsepower.
2) Gears can be used to ________.
A) increase speed
B) increase torque
C) reverse direction
D) All of the above
Answer: D
Page Ref: 11
Objective: 2-3 Explain gear ratios and their effect on vehicle operation.
3) If a gear with 20 teeth is driving a gear with 60 teeth, the gear ratio is ________.
A) 2:6
B) 3:1
C) 1:3
D) 0.33:1
Answer: B
Page Ref: 15
Objective: 2-3 Explain gear ratios and their effect on vehicle operation.
4) Technician A says that a helical gear is stronger than a spur gear. Technician B says that a
helical gear is noisier that a spur gear. Which technician is correct?
A) Technician A only
B) Technician B only
C) Both technicians A and B
D) Neither technician A nor B
Answer: D
Page Ref: 13
Objective: 2-2 Describe the various gear types and their effect on speed, torque, and direction
of rotation.
1
Copyright © 2024 Pearson Education, Inc.
,5) Which type of gear may be found in a rear-wheel-drive axle?
A) Hypoid
B) Spiral bevel
C) Spur
D) Helical
Answer: A
Page Ref: 13
Objective: 2-2 Describe the various gear types and their effect on speed, torque, and direction
of rotation.
6) The transmission is in first gear, which has a 2.5:1 ratio, and the rear axle has a ratio of 2:1.
The overall gear ratio is ________.
A) 4.5:1
B) 5:1
C) 2:1
D) 2.5:1
Answer: B
Page Ref: 15
Objective: 2-3 Explain gear ratios and their effect on vehicle operation.
7) The type of gear set used in most automatic transmissions is ________.
A) spur gears
B) planetary gears
C) helical gears
D) Any of the above
Answer: B
Page Ref: 18
Objective: 2-5 Discuss automatic transmissions and the planetary gear sets used for automatic
transmissions.
8) What shift mode should be used when descending a steep hill?
A) Drive (D)
B) Second (2)
C) Neutral (N)
D) Low (L)
Answer: D
Page Ref: 18
Objective: 2-5 Discuss automatic transmissions and the planetary gear sets used for automatic
transmissions.
2
Copyright © 2024 Pearson Education, Inc.
, 9) Full time four-wheel-drive vehicles use ________.
A) a transfer case
B) spiral bevel drive axles
C) three differentials
D) Both A and C
Answer: D
Page Ref: 23
Objective: 2-6 Compare rear-wheel drive, front-wheel drive, four-wheel drive, and all-wheel
drive.
10) What is used to transfer torque to all four wheels?
A) Four driveshafts
B) A transfer case or power transfer unit
C) Four differentials
D) All of the above
Answer: B
Page Ref: 23
Objective: 2-7 Explain the characteristics of driveshafts and drive axle assemblies.
11) The vehicle drivetrain can send power to ________.
A) the front wheels
B) the rear wheels
C) Either A or B
D) Neither A nor B
Answer: C
Page Ref: 20
Objective: 2-6 Compare rear-wheel drive, front-wheel drive, four-wheel drive, and all-wheel
drive.
12) Technician A says that a clutch must engage completely, all at once. Technician B says that
the clutch must slip during engagement. Which technician is correct?
A) Technician A only
B) Technician B only
C) Both technicians A and B
D) Neither technician A nor B
Answer: B
Page Ref: 16
Objective: 2-4 Discuss the types of manual transmissions and transaxles that are currently in
use.
3
Copyright © 2024 Pearson Education, Inc.
