FLORIDA CERTIFIED GENERAL CONTRACTOR EXAM | QUESTIONS
AND ANSWERS | VERIFIED ANSWERS PLUS RATIONALES | EXAM
ALREADY GRADED A+ | LATEST EXAM UPDATE
1.
Which organization publishes the primary building code adopted in Florida?
A. OSHA
B. ANSI
C. ICC
D. NFPA
Answer: C. ICC
Rationale: The Florida Building Code is based largely on model codes developed by the
International Code Council (ICC).
2.
The Florida Building Code is updated on a regular cycle of:
A. Every 2 years
B. Every 3 years
C. Every 5 years
D. Every 10 years
Answer: B. Every 3 years
Rationale: The Florida Building Code is updated every three years with interim amendments as
necessary.
3.
Which wind speed design map is used for structural design in Florida?
A. Ultimate Design Wind Speed Map
B. Basic Wind Speed Map
C. Tornado Impact Map
D. Seismic Design Map
Answer: A. Ultimate Design Wind Speed Map
Rationale: Florida uses Ultimate Design Wind Speeds (Vult) for structural design calculations.
,4.
Who regulates contractor licensing in Florida?
A. Florida Department of Business and Professional Regulation
B. Florida Department of Health
C. Florida Department of Transportation
D. Florida Department of Agriculture and Consumer Services
Answer: A. Florida Department of Business and Professional Regulation
Rationale: The DBPR oversees contractor licensing and regulation in Florida.
5.
A Notice of Commencement in Florida must be filed when the project value exceeds:
A. $500
B. $1,000
C. $2,500
D. $5,000
Answer: C. $2,500
Rationale: Florida law requires a Notice of Commencement for improvements valued at more
than $2,500.
6.
The minimum compressive strength of concrete for residential footings is typically:
A. 1,500 psi
B. 2,000 psi
C. 2,500 psi
D. 3,000 psi
Answer: C. 2,500 psi
Rationale: Residential footings generally require a minimum compressive strength of 2,500 psi
per code standards.
,7.
The minimum slope for asphalt shingle roofs is:
A. 1:12
B. 2:12
C. 3:12
D. 4:12
Answer: B. 2:12
Rationale: Asphalt shingles require a minimum slope of 2:12, with special underlayment
required at low slopes.
8.
Which document establishes OSHA safety standards for construction?
A. OSHA 1910
B. OSHA 1926
C. ANSI A10
D. NFPA 70
Answer: B. OSHA 1926
Rationale: OSHA 29 CFR 1926 contains construction industry safety regulations.
9.
Minimum guardrail height for residential decks is:
A. 30 inches
B. 36 inches
C. 42 inches
D. 48 inches
Answer: B. 36 inches
Rationale: Residential guardrails must be at least 36 inches high per building code.
10.
What is the standard maximum riser height for residential stairs?
, A. 6 inches
B. 7 inches
C. 7¾ inches
D. 8 inches
Answer: C. 7¾ inches
Rationale: The maximum riser height allowed is 7¾ inches per residential code.
11.
The minimum tread depth for residential stairs is:
A. 9 inches
B. 10 inches
C. 11 inches
D. 12 inches
Answer: B. 10 inches
Rationale: Residential stairs require a minimum tread depth of 10 inches.
12.
Which test is used to measure soil compaction?
A. Slump test
B. Proctor test
C. Cylinder test
D. Pull test
Answer: B. Proctor test
Rationale: The Proctor test determines optimal moisture content and maximum dry density for
soil compaction.
13.
Reinforcing steel is measured in:
A. Pounds per square foot
B. Gauge numbers
AND ANSWERS | VERIFIED ANSWERS PLUS RATIONALES | EXAM
ALREADY GRADED A+ | LATEST EXAM UPDATE
1.
Which organization publishes the primary building code adopted in Florida?
A. OSHA
B. ANSI
C. ICC
D. NFPA
Answer: C. ICC
Rationale: The Florida Building Code is based largely on model codes developed by the
International Code Council (ICC).
2.
The Florida Building Code is updated on a regular cycle of:
A. Every 2 years
B. Every 3 years
C. Every 5 years
D. Every 10 years
Answer: B. Every 3 years
Rationale: The Florida Building Code is updated every three years with interim amendments as
necessary.
3.
Which wind speed design map is used for structural design in Florida?
A. Ultimate Design Wind Speed Map
B. Basic Wind Speed Map
C. Tornado Impact Map
D. Seismic Design Map
Answer: A. Ultimate Design Wind Speed Map
Rationale: Florida uses Ultimate Design Wind Speeds (Vult) for structural design calculations.
,4.
Who regulates contractor licensing in Florida?
A. Florida Department of Business and Professional Regulation
B. Florida Department of Health
C. Florida Department of Transportation
D. Florida Department of Agriculture and Consumer Services
Answer: A. Florida Department of Business and Professional Regulation
Rationale: The DBPR oversees contractor licensing and regulation in Florida.
5.
A Notice of Commencement in Florida must be filed when the project value exceeds:
A. $500
B. $1,000
C. $2,500
D. $5,000
Answer: C. $2,500
Rationale: Florida law requires a Notice of Commencement for improvements valued at more
than $2,500.
6.
The minimum compressive strength of concrete for residential footings is typically:
A. 1,500 psi
B. 2,000 psi
C. 2,500 psi
D. 3,000 psi
Answer: C. 2,500 psi
Rationale: Residential footings generally require a minimum compressive strength of 2,500 psi
per code standards.
,7.
The minimum slope for asphalt shingle roofs is:
A. 1:12
B. 2:12
C. 3:12
D. 4:12
Answer: B. 2:12
Rationale: Asphalt shingles require a minimum slope of 2:12, with special underlayment
required at low slopes.
8.
Which document establishes OSHA safety standards for construction?
A. OSHA 1910
B. OSHA 1926
C. ANSI A10
D. NFPA 70
Answer: B. OSHA 1926
Rationale: OSHA 29 CFR 1926 contains construction industry safety regulations.
9.
Minimum guardrail height for residential decks is:
A. 30 inches
B. 36 inches
C. 42 inches
D. 48 inches
Answer: B. 36 inches
Rationale: Residential guardrails must be at least 36 inches high per building code.
10.
What is the standard maximum riser height for residential stairs?
, A. 6 inches
B. 7 inches
C. 7¾ inches
D. 8 inches
Answer: C. 7¾ inches
Rationale: The maximum riser height allowed is 7¾ inches per residential code.
11.
The minimum tread depth for residential stairs is:
A. 9 inches
B. 10 inches
C. 11 inches
D. 12 inches
Answer: B. 10 inches
Rationale: Residential stairs require a minimum tread depth of 10 inches.
12.
Which test is used to measure soil compaction?
A. Slump test
B. Proctor test
C. Cylinder test
D. Pull test
Answer: B. Proctor test
Rationale: The Proctor test determines optimal moisture content and maximum dry density for
soil compaction.
13.
Reinforcing steel is measured in:
A. Pounds per square foot
B. Gauge numbers
