Practice Exam Questions And Correct
Answers (Verified Answers) Plus
Rationales
1. What must you do before loading or unloading any hazardous
materials?
Contact the shipper
Inspect the cargo area for cleanliness
Read the shipping papers to know the hazards of the materials
Call the Department of Transportation
Reading the shipping papers provides critical information such as the
identity of the material, required placards, and emergency
procedures.
2. The hazard class of a material indicates:
How the material should be stored
The type of hazard the material presents
, The manufacturer’s information
The insurance requirements
Hazard classes identify the primary danger, such as flammable,
explosive, or toxic properties.
3. Who is responsible for certifying that the hazardous materials are
prepared properly?
The driver
The loader
The carrier
The shipper
The shipper is responsible for correctly classifying, packaging,
labeling, and marking hazardous materials.
4. What is the purpose of placards?
To provide information to the customer
To help loaders organize cargo
To warn others of hazardous cargo
To identify the carrier
Placards are essential visual warnings used to alert emergency
responders and the public about hazardous materials.
5. A driver must have a hazardous materials endorsement when
transporting:
Any amount of gasoline
Non-toxic gases
, Materials requiring placards
Food items across state lines
HAZMAT endorsements are required for any quantity of materials
that require placarding under federal regulations.
6. How often must you renew your HAZMAT endorsement?
Every 2 years
Every 5 years with a TSA background check
Every time your CDL is renewed
Annually
Federal regulations require a TSA background check every 5 years to
renew the HAZMAT endorsement.
7. What should you do if your vehicle has a hazardous materials leak?
Park and secure the area, then call emergency services
Continue to the destination
Wash the vehicle down
Turn on the hazard lights and keep driving slowly
Leaking HAZMAT cargo is extremely dangerous. Secure the area and
call emergency services immediately.
8. If you have a fire while transporting hazardous materials, you should:
Use water to extinguish all fires
Use the fire extinguisher if safe and call for help
Drive to a fire station
, Open the trailer doors to release pressure
Only attempt to extinguish fires if safe to do so; some materials react
dangerously to water.
9. What does the "ERG" stand for?
Emergency Rules for Gas
Engine Rating Guide
Emergency Response Guidebook
Environmental Regulation Group
The ERG provides first responders with guidance on how to handle
hazardous materials incidents.
10. When transporting Class 1 explosives, what is required?
A safe parking location away from populated areas
The driver must wear a fire suit
A hazmat technician must accompany the load
The explosives must be stored with flammable liquids
Class 1 explosives must be parked safely due to their high risk, and
specific routing and handling procedures apply.
11. Who is responsible for knowing the regulations and driving
safely with hazardous materials?
The shipper
The driver
The loading dock supervisor