Question 1
A liquid with a flash point ABOVE 100F
Correct Answer
Combustible Liquid
Question 2
If the current flowing out from an electrical panel is 12.5 amps, and it then flows through an electrical load of 1500 watts,
what is the amperage of the remaining current flow of the return circuit?
Correct Answer
Current Flow
Question 3
Power (P) = current (I) x voltage (V)
Correct Answer
Power (P)
Page 1 of 88
,Question 4
Watts = amps x volts
Correct Answer
Watts
Question 5
1987
Correct Answer
Year of NFPA 1033 First Edition
Question 6
5 times the distance from the furthest debris
Correct Answer
Recommended Distance for Securing Blast Scene
Question 7
1100°F
Correct Answer
Onset of Flashover Temperature
Page 2 of 88
,Question 8
1960°F
Correct Answer
Copper Melting Temperature
Question 9
2 W/cm2 indicates the onset of flashover
Correct Answer
Radiant Heat Flux Measurement
Question 10
240 volts between the two hot wires in most single-family residences in the United States
Correct Answer
Voltage at Service Entrance Cables
Question 11
3 years
Correct Answer
NFPA 921 Revision Cycle
Page 3 of 88
, Question 12
350°F
Correct Answer
Flash Point of Power Steering Fluid
Question 13
35-70 p.s.i.
Correct Answer
Typical Pressure in High-Pressure Fuel-Injected Vehicles
Question 14
5 and 17
Correct Answer
Lower and Upper Explosive Limit of Natural Gas
Question 15
680°F
Correct Answer
Ignition Temperature of Power Steering Fluid
Page 4 of 88