CCNA 200 301 Practice Exam- EXAM
QUESTIONS AND ALL CORRECT
ANSWERS 100% SOLVED AND
GUARANTEED SUCCESS
__ and __ are two WAN options to help
improve scalability and reliability.
a. Asynchronous routing
b. Static routing
c. Dynamic routing
d. Single-homed branches
e. Dual-homed branches
c. Dynamic routing
e. Dual-homed branches
__ is a how Unified Wireless reacts to WI-FI
channel overlap.
a. An admin assigns channels on a per-device,
per-interface
b. Separates vendors on different channels
dynamically
c. It alternates between 2.5 and 5 Ghz
dynamically on adjacent Aps
d. It analyzes load and noise and dynamically
assigns a channel
d. It analyzes load and noise and dynamically
assigns a channel
,A switch __ when receiving a frame on FA0/10
for a destination MAC address that is missing
from its table.
a. floods the frame out FA0/10
b. drops the frame
c. holds the frame till the aging time expires
d. floods the frame to all interfaces except
FA0/10
d. floods the frame to all interfaces except
FA0/10
TFTP can do __ as a network operation.
a. Transfer files on a congested link
b. Transfer files between file systems on a router
c. Transfer a backup config from a server to a
router with a username and password
d. Transfer an IOS image from a server to a
router
d. Transfer an IOS image from a server to a
router
Which of the following are details of TCP and which of
them are UDP?
- Transmits as a stream
UDP
Which of the following are details of TCP and which of
them are UDP?
- sends transmissions in sequence
TCP
Which of the following are details of TCP and which of
them are UDP?
,- Uses a higher transmission rate to support
latency-sensitive applications
UDP
Which of the following are details of TCP and which of
them are UDP?
- Transmits packets individually
TCP
Which of the following are details of TCP and which of
them are UDP?
- Transmissions include an 8-Byte header
UDP
Which of the following are details of TCP and which of
them are UDP?
-Uses lower transmission rate to ensure
reliability
TCP
____ is a way that TCP and UDP differ in how they ensure
deliver packets.
a. TCP uses checksum, parity checks, and retransmissions,
and UDP acknowledgements only.
b. TCP uses retransmissions, acknowledgement, and parity
checks and UDP uses cyclic redundancy checks only
c. TCP uses checksum, acknowledgements, and
retransmissions, and UDP uses checksums only
d. TCP uses two-dimensional parity checks, checksums,
and cyclic redundancy checks, and UDP uses
retransmissions only.
c. TCP uses checksum, acknowledgements, and
retransmissions, and UDP uses checksums only
, ip access-list extended SECURITY_ACL
permit tcp any any eq 23
permit tcp any any eq 179
permit tcp any eq 179 any
deny ip any any
____ access list entry would help secure VTY access to
a router.
a. permit tcp any any eq scp
b. permit tcp any any eq ssh
c. permit tcp any any eq https
d. permit tcp any any eq telnet
b. permit tcp any any eq ssh
____ is how a physical system would be properly connected
to a virtual environment.
a. A cable connected to a physical switch on the network
b. Wireless to an access point that is physically connected
to the network
c. A virtual switch that links to an access point that is
physically connected to the network
d. A software switch on a hypervisor that is physically
connected to the network
d. A software switch on a hypervisor that is physically
connected to the network
____ is the difference regarding reliability and
communication type between TCP and UDP.
a. TCP is not reliable and is a connection-oriented protocol
while UDP is reliable and is a connectionless protocol
b. TCP is reliable and is a connection-oriented protocol
while UDP is not reliable and is a connectionless
protocol
c. TCP is reliable and is a connectionless protocol while
UDP is not reliable and is a connection-oriented
QUESTIONS AND ALL CORRECT
ANSWERS 100% SOLVED AND
GUARANTEED SUCCESS
__ and __ are two WAN options to help
improve scalability and reliability.
a. Asynchronous routing
b. Static routing
c. Dynamic routing
d. Single-homed branches
e. Dual-homed branches
c. Dynamic routing
e. Dual-homed branches
__ is a how Unified Wireless reacts to WI-FI
channel overlap.
a. An admin assigns channels on a per-device,
per-interface
b. Separates vendors on different channels
dynamically
c. It alternates between 2.5 and 5 Ghz
dynamically on adjacent Aps
d. It analyzes load and noise and dynamically
assigns a channel
d. It analyzes load and noise and dynamically
assigns a channel
,A switch __ when receiving a frame on FA0/10
for a destination MAC address that is missing
from its table.
a. floods the frame out FA0/10
b. drops the frame
c. holds the frame till the aging time expires
d. floods the frame to all interfaces except
FA0/10
d. floods the frame to all interfaces except
FA0/10
TFTP can do __ as a network operation.
a. Transfer files on a congested link
b. Transfer files between file systems on a router
c. Transfer a backup config from a server to a
router with a username and password
d. Transfer an IOS image from a server to a
router
d. Transfer an IOS image from a server to a
router
Which of the following are details of TCP and which of
them are UDP?
- Transmits as a stream
UDP
Which of the following are details of TCP and which of
them are UDP?
- sends transmissions in sequence
TCP
Which of the following are details of TCP and which of
them are UDP?
,- Uses a higher transmission rate to support
latency-sensitive applications
UDP
Which of the following are details of TCP and which of
them are UDP?
- Transmits packets individually
TCP
Which of the following are details of TCP and which of
them are UDP?
- Transmissions include an 8-Byte header
UDP
Which of the following are details of TCP and which of
them are UDP?
-Uses lower transmission rate to ensure
reliability
TCP
____ is a way that TCP and UDP differ in how they ensure
deliver packets.
a. TCP uses checksum, parity checks, and retransmissions,
and UDP acknowledgements only.
b. TCP uses retransmissions, acknowledgement, and parity
checks and UDP uses cyclic redundancy checks only
c. TCP uses checksum, acknowledgements, and
retransmissions, and UDP uses checksums only
d. TCP uses two-dimensional parity checks, checksums,
and cyclic redundancy checks, and UDP uses
retransmissions only.
c. TCP uses checksum, acknowledgements, and
retransmissions, and UDP uses checksums only
, ip access-list extended SECURITY_ACL
permit tcp any any eq 23
permit tcp any any eq 179
permit tcp any eq 179 any
deny ip any any
____ access list entry would help secure VTY access to
a router.
a. permit tcp any any eq scp
b. permit tcp any any eq ssh
c. permit tcp any any eq https
d. permit tcp any any eq telnet
b. permit tcp any any eq ssh
____ is how a physical system would be properly connected
to a virtual environment.
a. A cable connected to a physical switch on the network
b. Wireless to an access point that is physically connected
to the network
c. A virtual switch that links to an access point that is
physically connected to the network
d. A software switch on a hypervisor that is physically
connected to the network
d. A software switch on a hypervisor that is physically
connected to the network
____ is the difference regarding reliability and
communication type between TCP and UDP.
a. TCP is not reliable and is a connection-oriented protocol
while UDP is reliable and is a connectionless protocol
b. TCP is reliable and is a connection-oriented protocol
while UDP is not reliable and is a connectionless
protocol
c. TCP is reliable and is a connectionless protocol while
UDP is not reliable and is a connection-oriented
