OREGON TATTOO FINAL EXAM 2026 ACTUAL QUESTIONS
AND ANSWERS RATED A+
✔✔official transcript - ✔✔an original document authorized by the appropriate office in
the Higher Education Coordinating Commission and certified by a career school
licensed under ORS 345 indicating applicant identity information, field of practice(s)
enrolled under, specific hour requirements for each field of practice if applicable,
enrollment information and a signature by an authorized representative on file with the
Office. Original documents must be submitted directly to the Office from the educational
institution by United States Postal Service mail or other recognized mail service provider
in a sealed envelope or by other means approved by the Office.
✔✔sharps container - ✔✔means a puncture-resistant , leak-proof container that can be
closed for handling, storage, transportation, and disposal. the container must be labeled
with the "Biohazard" symbol.
✔✔30 days - ✔✔how long is a temporary tattoo license valid for
✔✔up to 2 times in a 12 month period - ✔✔you can renew a temporary tattoo license __
__ _ ____ __ _ __ ______ _________ from the date the office receives the initial
application, license renewal can be done consecutively with no lapse in active license
dates
✔✔20 days - ✔✔a request for a new temporary tattoo license must be received at least
__ ____ before tattooing services are provided unless otherwise approved by the Office
✔✔24 hours - ✔✔for a temporary tattoo license you must submit notification of a
change in work location at least __ ______ before services are preformed on a form
prescribed by the Office
✔✔licensed - ✔✔with a temporary tattoo license you must work in a ____________
facility
✔✔ - ✔✔part of a requirement for application for a temporary tattoo license means you
must attest to ___ months of training or experience within the last 2 years, performing
tattooing
✔✔7 calendar days - ✔✔after 1st and 2nd failed attempt applicant may not retake state
board test for _ _____________ ____
✔✔30 calendar days and 100 hours - ✔✔after 3rd failed attempt applicant may not
retake state board test for __ __________ _____, must pay all additional fees and must
submit an official transcript certifying completion of an additional ___ ______ of
instruction in theory, focused on the approved curriculum from a career school licensed
,✔✔7 calendar days - ✔✔after 4th and 5th failed attempt applicant may not retake state
board test for _ _____________ ____
✔✔30 calendar days and 100 hours - ✔✔after 6th failed attempt applicant may not
retake state board test for __ __________ _____, must pay all additional fees and must
submit an official transcript certifying completion of an additional ___ ______ of
instruction in theory, focused on the approved curriculum from a career school licensed
✔✔7th - ✔✔on which failed attempt will the ability to retake state board, or requirements
for retake or both will be determined by the office on a case by case basis
✔✔one year - ✔✔tattoo license renewal is valid for ___ ____
✔✔round needles - ✔✔are needles that are soldered around a central shaft in round
patterns
✔✔liners or shaders - ✔✔round needles can be __________ or ____________,
depending on how close together they are placed
✔✔round liners - ✔✔needles in a circle formation that are packed tightly together
✔✔flat needles - ✔✔are needles that are soldered in a straight line to a needle bar
✔✔magnum needle - ✔✔these needles are the go to for most shading work, usually
have a long taper, and deliver more ink making them ideal for large areas
✔✔weaved magnums - ✔✔are needles soldered to a flat needle bar like flat needles,
but they are soldered on alternating sides of the needle
✔✔stacked magnums - ✔✔are needles that have two rows of needles on both sides of
the bar, but are position much closer together
✔✔RL - ✔✔round liner configuration abbreviation
✔✔RS - ✔✔round shader configuration abbreviation
✔✔FL - ✔✔flat liner configuration abbreviation
✔✔FS - ✔✔flat shader configuration abbreviation
✔✔M1 - ✔✔weaved magnum configuration abbreviation
✔✔M2 - ✔✔stacked magnum configuration abbreviation
, ✔✔RM - ✔✔round magnum configuration abbreviation
✔✔CM - ✔✔curved magnum configuration abbreviation
✔✔BP - ✔✔bugpin configuration abbreviation
✔✔12 - ✔✔standard .35 mm needle diameter
✔✔10 - ✔✔(lining) .30 mm needle diameter
✔✔8 - ✔✔(bugpin) .25 mm needle diameter
✔✔6 - ✔✔(bugpin) .20 mm needle diameter
✔✔bugpin needles - ✔✔are needles that are made with much thinner gage steel than
standard needles (between 0.20 - 0.25 mm thick)
✔✔diameter of needle - ✔✔1204RL - first two numbers in this package sequence
✔✔needle count - ✔✔1204RL - 2nd set of numbers in this package sequence
✔✔grouping configuration - ✔✔1204RL - last set of letters in this package sequence
✔✔taper - ✔✔what is the term for the needle point length?
✔✔1.5mm - ✔✔standard short taper length
✔✔2mm - ✔✔long taper length
✔✔lining - ✔✔RL is used for
✔✔shading - ✔✔RS is used for
✔✔shading large areas - ✔✔weaved mag is used for
✔✔shading tight large areas - ✔✔stacked mag is used for
✔✔10 - ✔✔a tattoo license holder must complete a minimum of __ hours of satisfactory
continuing education every year
✔✔5 - ✔✔_ hours of continuing education must be obtained by participation or
attendance at a course provided by institutions or programs accredited by a federally
AND ANSWERS RATED A+
✔✔official transcript - ✔✔an original document authorized by the appropriate office in
the Higher Education Coordinating Commission and certified by a career school
licensed under ORS 345 indicating applicant identity information, field of practice(s)
enrolled under, specific hour requirements for each field of practice if applicable,
enrollment information and a signature by an authorized representative on file with the
Office. Original documents must be submitted directly to the Office from the educational
institution by United States Postal Service mail or other recognized mail service provider
in a sealed envelope or by other means approved by the Office.
✔✔sharps container - ✔✔means a puncture-resistant , leak-proof container that can be
closed for handling, storage, transportation, and disposal. the container must be labeled
with the "Biohazard" symbol.
✔✔30 days - ✔✔how long is a temporary tattoo license valid for
✔✔up to 2 times in a 12 month period - ✔✔you can renew a temporary tattoo license __
__ _ ____ __ _ __ ______ _________ from the date the office receives the initial
application, license renewal can be done consecutively with no lapse in active license
dates
✔✔20 days - ✔✔a request for a new temporary tattoo license must be received at least
__ ____ before tattooing services are provided unless otherwise approved by the Office
✔✔24 hours - ✔✔for a temporary tattoo license you must submit notification of a
change in work location at least __ ______ before services are preformed on a form
prescribed by the Office
✔✔licensed - ✔✔with a temporary tattoo license you must work in a ____________
facility
✔✔ - ✔✔part of a requirement for application for a temporary tattoo license means you
must attest to ___ months of training or experience within the last 2 years, performing
tattooing
✔✔7 calendar days - ✔✔after 1st and 2nd failed attempt applicant may not retake state
board test for _ _____________ ____
✔✔30 calendar days and 100 hours - ✔✔after 3rd failed attempt applicant may not
retake state board test for __ __________ _____, must pay all additional fees and must
submit an official transcript certifying completion of an additional ___ ______ of
instruction in theory, focused on the approved curriculum from a career school licensed
,✔✔7 calendar days - ✔✔after 4th and 5th failed attempt applicant may not retake state
board test for _ _____________ ____
✔✔30 calendar days and 100 hours - ✔✔after 6th failed attempt applicant may not
retake state board test for __ __________ _____, must pay all additional fees and must
submit an official transcript certifying completion of an additional ___ ______ of
instruction in theory, focused on the approved curriculum from a career school licensed
✔✔7th - ✔✔on which failed attempt will the ability to retake state board, or requirements
for retake or both will be determined by the office on a case by case basis
✔✔one year - ✔✔tattoo license renewal is valid for ___ ____
✔✔round needles - ✔✔are needles that are soldered around a central shaft in round
patterns
✔✔liners or shaders - ✔✔round needles can be __________ or ____________,
depending on how close together they are placed
✔✔round liners - ✔✔needles in a circle formation that are packed tightly together
✔✔flat needles - ✔✔are needles that are soldered in a straight line to a needle bar
✔✔magnum needle - ✔✔these needles are the go to for most shading work, usually
have a long taper, and deliver more ink making them ideal for large areas
✔✔weaved magnums - ✔✔are needles soldered to a flat needle bar like flat needles,
but they are soldered on alternating sides of the needle
✔✔stacked magnums - ✔✔are needles that have two rows of needles on both sides of
the bar, but are position much closer together
✔✔RL - ✔✔round liner configuration abbreviation
✔✔RS - ✔✔round shader configuration abbreviation
✔✔FL - ✔✔flat liner configuration abbreviation
✔✔FS - ✔✔flat shader configuration abbreviation
✔✔M1 - ✔✔weaved magnum configuration abbreviation
✔✔M2 - ✔✔stacked magnum configuration abbreviation
, ✔✔RM - ✔✔round magnum configuration abbreviation
✔✔CM - ✔✔curved magnum configuration abbreviation
✔✔BP - ✔✔bugpin configuration abbreviation
✔✔12 - ✔✔standard .35 mm needle diameter
✔✔10 - ✔✔(lining) .30 mm needle diameter
✔✔8 - ✔✔(bugpin) .25 mm needle diameter
✔✔6 - ✔✔(bugpin) .20 mm needle diameter
✔✔bugpin needles - ✔✔are needles that are made with much thinner gage steel than
standard needles (between 0.20 - 0.25 mm thick)
✔✔diameter of needle - ✔✔1204RL - first two numbers in this package sequence
✔✔needle count - ✔✔1204RL - 2nd set of numbers in this package sequence
✔✔grouping configuration - ✔✔1204RL - last set of letters in this package sequence
✔✔taper - ✔✔what is the term for the needle point length?
✔✔1.5mm - ✔✔standard short taper length
✔✔2mm - ✔✔long taper length
✔✔lining - ✔✔RL is used for
✔✔shading - ✔✔RS is used for
✔✔shading large areas - ✔✔weaved mag is used for
✔✔shading tight large areas - ✔✔stacked mag is used for
✔✔10 - ✔✔a tattoo license holder must complete a minimum of __ hours of satisfactory
continuing education every year
✔✔5 - ✔✔_ hours of continuing education must be obtained by participation or
attendance at a course provided by institutions or programs accredited by a federally
