TEST EQUIPMENT NAVEDTRA 14188A
QUESTIONS AND ANSWERS WITH
DETAILED SOLUTIONS – UPDATED
2026 VERSION GUARANTEED
SUCCESS
Question 1: Which identification system is standard across all military
branches for the classification of electronic test gear? ✔✔ Answer: Joint
Electronics Type Designation System (JETDS)
Question 2: Into which two primary categories is military test equipment
divided? ✔✔ Answer: General-purpose electronic test equipment (GPETE) and
special-purpose electronic test equipment (SPETE)
Question 3: What category of test gear is engineered to produce, adjust, or
evaluate specific electronic parameters for a singular, dedicated system? ✔✔
Answer: Special-purpose electronic test equipment (SPETE)
Question 4: What are the two fundamental components that make up the
SCLSIS program? ✔✔ Answer: Validation and updating
Question 5: Which specific calibration sticker is applied when a user needs to
know the exact measurement values to operate the equipment accurately? ✔✔
Answer: CALIBRATED—REFER TO REPORT
Question 6: If a piece of equipment requires calibration while it is installed in
its operational position, what label must be attached to it? ✔✔ Answer:
SPECIAL CALIBRATION label
, Q-7. Responsibility for repair and maintenance of test equipment generally rests
with what group of personnel? -ANSWER✔✔Maintenance personnel
Q-8. What Navy office oversees the MEASURE program? -ANSWER✔✔The
Chief of Naval Operations
Q-9. What are the two main categories of maintenance? -ANSWER✔✔Preventive
and corrective maintenance
Q-10. What type of maintenance involves isolating equipment troubles and
replacing defective parts? -ANSWER✔✔Corrective maintenance.
Q-11. Which quantity (voltage or current) determines the intensity of an electrical
shock? -ANSWER✔✔Current.
Q-12. What tool is used to de-energize capacitors in a circuit that has been
disconnected from its power source? -ANSWER✔✔Shorting probe
Q-13. On what range should you set the voltmeter prior to taking a voltage
measurement? -ANSWER✔✔Highest.
Q-14. When taking a voltage measurement, which lead of the voltmeter should you
connect to the circuit first? -ANSWER✔✔Ground
Q-15. Is an ammeter connected in series or in parallel with the circuit under test? -
ANSWER✔✔In series
QUESTIONS AND ANSWERS WITH
DETAILED SOLUTIONS – UPDATED
2026 VERSION GUARANTEED
SUCCESS
Question 1: Which identification system is standard across all military
branches for the classification of electronic test gear? ✔✔ Answer: Joint
Electronics Type Designation System (JETDS)
Question 2: Into which two primary categories is military test equipment
divided? ✔✔ Answer: General-purpose electronic test equipment (GPETE) and
special-purpose electronic test equipment (SPETE)
Question 3: What category of test gear is engineered to produce, adjust, or
evaluate specific electronic parameters for a singular, dedicated system? ✔✔
Answer: Special-purpose electronic test equipment (SPETE)
Question 4: What are the two fundamental components that make up the
SCLSIS program? ✔✔ Answer: Validation and updating
Question 5: Which specific calibration sticker is applied when a user needs to
know the exact measurement values to operate the equipment accurately? ✔✔
Answer: CALIBRATED—REFER TO REPORT
Question 6: If a piece of equipment requires calibration while it is installed in
its operational position, what label must be attached to it? ✔✔ Answer:
SPECIAL CALIBRATION label
, Q-7. Responsibility for repair and maintenance of test equipment generally rests
with what group of personnel? -ANSWER✔✔Maintenance personnel
Q-8. What Navy office oversees the MEASURE program? -ANSWER✔✔The
Chief of Naval Operations
Q-9. What are the two main categories of maintenance? -ANSWER✔✔Preventive
and corrective maintenance
Q-10. What type of maintenance involves isolating equipment troubles and
replacing defective parts? -ANSWER✔✔Corrective maintenance.
Q-11. Which quantity (voltage or current) determines the intensity of an electrical
shock? -ANSWER✔✔Current.
Q-12. What tool is used to de-energize capacitors in a circuit that has been
disconnected from its power source? -ANSWER✔✔Shorting probe
Q-13. On what range should you set the voltmeter prior to taking a voltage
measurement? -ANSWER✔✔Highest.
Q-14. When taking a voltage measurement, which lead of the voltmeter should you
connect to the circuit first? -ANSWER✔✔Ground
Q-15. Is an ammeter connected in series or in parallel with the circuit under test? -
ANSWER✔✔In series
