ENPHASE SOLAR PV
INSTALLATION
CERTIFICATION
TRAINING
[Document subtitle]
[DATE]
[COMPANY NAME]
[Company address]
,Certainly! Here's a numbered list of all the questions with their corresponding answers:
1. True or false: In a solar array with Enphase microinverters, all of the solar panels should
have the same orientation for maximum energy production.
**False**
The energy production of each micro/panel is independent from the others.
2. Which of the following are features of Enphase Enlighten monitoring?
**E. All of the above**
3. Which government agency recommends the use of microinverters for solar PV installation
in hurricane-prone areas?
**C. FEMA- Federal Emergency Management Agency**
4. If one microinverter in a solar PV system fails, what will occur?
**B. The one solar panel connected to that microinverter will be out of operation**
5. What is a single point of failure?
**A. A part of a system that, if it fails, will stop the entire system from working**
6. The "ABC's" of Fall Protection stands for_________
**Anchor, Body Harness, Connector**
7. What governing body sets federal and statewide safety standards?
**A. OSHA**
8. How many points of contact must you keep on a ladder to be considered safe?
**C. 3**
, 9. How often should you check your fall protection equipment?
**C. Before each use**
10. True or false: Fall protection can save your life.
**True**
11. What are the 3 core components of an Enphase PV system?
**Enlighten, Envoy, Microinverter**
12. What is the ratio between microinverters and PV modules in an Enphase PV system?
**1:1**
13. What are the maximum number of circuits that can be installed in an Enphase Combiner
3?
**4**
14. What device collects data from the array and uploads that data to the web?
**B. Envoy**
15. True or false: Solar panels make DC energy.
**True**
16. True or false: Enphase microinverters do not need an EGC.
**True**
17. IQ 7+ Inverters are compatible with modules with what cell counts?
**C. 60** and **D. 72**
INSTALLATION
CERTIFICATION
TRAINING
[Document subtitle]
[DATE]
[COMPANY NAME]
[Company address]
,Certainly! Here's a numbered list of all the questions with their corresponding answers:
1. True or false: In a solar array with Enphase microinverters, all of the solar panels should
have the same orientation for maximum energy production.
**False**
The energy production of each micro/panel is independent from the others.
2. Which of the following are features of Enphase Enlighten monitoring?
**E. All of the above**
3. Which government agency recommends the use of microinverters for solar PV installation
in hurricane-prone areas?
**C. FEMA- Federal Emergency Management Agency**
4. If one microinverter in a solar PV system fails, what will occur?
**B. The one solar panel connected to that microinverter will be out of operation**
5. What is a single point of failure?
**A. A part of a system that, if it fails, will stop the entire system from working**
6. The "ABC's" of Fall Protection stands for_________
**Anchor, Body Harness, Connector**
7. What governing body sets federal and statewide safety standards?
**A. OSHA**
8. How many points of contact must you keep on a ladder to be considered safe?
**C. 3**
, 9. How often should you check your fall protection equipment?
**C. Before each use**
10. True or false: Fall protection can save your life.
**True**
11. What are the 3 core components of an Enphase PV system?
**Enlighten, Envoy, Microinverter**
12. What is the ratio between microinverters and PV modules in an Enphase PV system?
**1:1**
13. What are the maximum number of circuits that can be installed in an Enphase Combiner
3?
**4**
14. What device collects data from the array and uploads that data to the web?
**B. Envoy**
15. True or false: Solar panels make DC energy.
**True**
16. True or false: Enphase microinverters do not need an EGC.
**True**
17. IQ 7+ Inverters are compatible with modules with what cell counts?
**C. 60** and **D. 72**
