1|Page 2|Page
OSHA 10 EXAM 2025/2026 ACTUAL EXAM During an OSHA inspection: - ✔✔✔ Correct Answer > You have the right
QUESTIONS AND CORRECT DETAILED to talk to the inspector privately
ANSWERS (VERIFIED ANSWERS) ALL
ANSWERED {170 Q & A} ALREADY GRADED A+ / The right of workers to seek safety and health on the job without
OSHA 10: INTODUCTION TO OSHA EXAM | fear of punishment is spelled out in: - ✔✔✔ Correct Answer > Section
11(c) of the OSH Act
BRAND NEW!
One of the main responsibilities employers have under OSHA is
to: - ✔✔✔ Correct Answer > Provide training required by OSHA
Introduction standards
OSHA's mission is to: - ✔✔✔ Correct Answer > Protect the safety and OSHA requires that employers pay for most required personal
health of America's workers protective equipment (PP), including: - ✔✔✔ Correct Answer > Hard
hats
The creation of OSHA provided this important right to workers -
✔✔✔ Correct Answer > The right to a safe and healthful workplace The OSHA standards for Construction and General Industry are
also known as: - ✔✔✔ Correct Answer > Part 1926 and Part 1910
A Safety Data Sheet (SDS) gives information about: - ✔✔✔ Correct
Answer > Hazardous chemicals What type of OSHA inspection is conducted when immediate
death or serious harm is likely? - ✔✔✔ Correct Answer > Imminent
danger
Among the rights related to OSHA recordkeeping, workers have
the right to review: - ✔✔✔ Correct Answer > The OSHA 300 Log and the
OSHA 300A Summary except for items that are personal When the employer receives an OSHA citation, it must be; - ✔✔✔
Correct Answer > Posted for 3 days or until the violation is fixed
,3|Page 4|Page
Electrical burns are the most serious of the three major types of
burns, and most often occur: - ✔✔✔ Correct Answer > On the hands,
If you feel that an OSHA inspection is needed to get hazards
corrected at your workplace, which is your best option? - ✔✔✔ from direct contact with current
Correct Answer > Submit a written, signed complaint with specific
hazard information
Hot wires, ungrounded wires that can cause a shock if you touch
them, are usually: - ✔✔✔ Correct Answer > Black or red
- ✔✔✔ Correct Answer > Electrical Safety
More than 50 percent of electrocutions are caused by a worker
OSHA's electrical standards are based on: - ✔✔✔ Correct Answer > The coming in direct contact with: - ✔✔✔ Correct Answer > Energized
power lines
NEC
The OSHA standard requires flexible cords to be rated for: - ✔✔✔
What are the four main types of electrical injuries? - ✔✔✔ Correct
Correct Answer > Hard or extra-hard usage
Answer > Electrocution, electric shock, burns, indirect (e.g., a fall
from a ladder)
What is the most frequent violation of OSHA electrical standards?
- ✔✔✔ Correct Answer > Improper grounding of circuitry and
Electricity travels in closed circuits, and its normal route is
equipment
through a conductor. Electric shock occurs when: - ✔✔✔ Correct
Answer > The body becomes part of the circuit
The three elements of a basic program for electrical safety are: -
✔✔✔ Correct Answer > Recognize, evaluate and control
A shock's severity depends on: - ✔✔✔ Correct Answer > Length of
exposure to electricity
The amount of current and its frequency All portable electric tools that are damaged shall be: - ✔✔✔ Correct
Answer > Removed from use and tagged "Do Not Use"
, 5|Page 6|Page
If you have a three-prong plug and a two-hole receptacle, it is The majority of today's power line accidents occur because: - ✔✔✔
acceptable to: - ✔✔✔ Correct Answer > Use an adapter with an adapter Correct Answer > Of failure to maintain proper work distances
wire connected to a known ground
A ground-fault circuit interrupter (GFCI) protects workers from
All hazards involved in the use of power tools can be prevented shock by: - ✔✔✔ Correct Answer > Matching the amount of current
by following five basic safety rules: Keep all tools in good going into an electrical device against the amount returning from
condition with regular maintenance; examine each tool for the device and shutting down power if a ground fault is detected
damage before use; operate according to the manufacturer's
instructions; provide and use the proper protective equipment;
and: - ✔✔✔ Correct Answer > Use the right tool for the job AEGCP's are implemented on construction sites to oversee: - ✔✔✔
Correct Answer > All cord sets
Cord sets and equipment connected by plug and cord
Live parts of electric equipment operating at 50 volts or more
must be: - ✔✔✔ Correct Answer > Guarded against accidental contact Receptacles that are not part of a building or structure
While any employee is exposed to contact with parts of electric - ✔✔✔ Correct Answer > Fall Protection
equipment or circuits that have been de-energized, the circuits
energizing the parts shall be: - ✔✔✔ Correct Answer > Locked out or
The OSHA standard mandates that any time a worker is at a
tagged out or both
height of six feet or more, the worker is at risk and needs to be
protected. Most fatalities, however, happen when workers fall
Low voltage does not mean low hazard. - ✔✔✔ Correct Answer > True from: - ✔✔✔ Correct Answer > Roofs
The two best means of avoiding electrical shock or injury when Employers must ensure that all walking and working surfaces
working with power tools are: - ✔✔✔ Correct Answer > Insulation and have the structural integrity to: - ✔✔✔ Correct Answer > Support
grounding workers safely
OSHA 10 EXAM 2025/2026 ACTUAL EXAM During an OSHA inspection: - ✔✔✔ Correct Answer > You have the right
QUESTIONS AND CORRECT DETAILED to talk to the inspector privately
ANSWERS (VERIFIED ANSWERS) ALL
ANSWERED {170 Q & A} ALREADY GRADED A+ / The right of workers to seek safety and health on the job without
OSHA 10: INTODUCTION TO OSHA EXAM | fear of punishment is spelled out in: - ✔✔✔ Correct Answer > Section
11(c) of the OSH Act
BRAND NEW!
One of the main responsibilities employers have under OSHA is
to: - ✔✔✔ Correct Answer > Provide training required by OSHA
Introduction standards
OSHA's mission is to: - ✔✔✔ Correct Answer > Protect the safety and OSHA requires that employers pay for most required personal
health of America's workers protective equipment (PP), including: - ✔✔✔ Correct Answer > Hard
hats
The creation of OSHA provided this important right to workers -
✔✔✔ Correct Answer > The right to a safe and healthful workplace The OSHA standards for Construction and General Industry are
also known as: - ✔✔✔ Correct Answer > Part 1926 and Part 1910
A Safety Data Sheet (SDS) gives information about: - ✔✔✔ Correct
Answer > Hazardous chemicals What type of OSHA inspection is conducted when immediate
death or serious harm is likely? - ✔✔✔ Correct Answer > Imminent
danger
Among the rights related to OSHA recordkeeping, workers have
the right to review: - ✔✔✔ Correct Answer > The OSHA 300 Log and the
OSHA 300A Summary except for items that are personal When the employer receives an OSHA citation, it must be; - ✔✔✔
Correct Answer > Posted for 3 days or until the violation is fixed
,3|Page 4|Page
Electrical burns are the most serious of the three major types of
burns, and most often occur: - ✔✔✔ Correct Answer > On the hands,
If you feel that an OSHA inspection is needed to get hazards
corrected at your workplace, which is your best option? - ✔✔✔ from direct contact with current
Correct Answer > Submit a written, signed complaint with specific
hazard information
Hot wires, ungrounded wires that can cause a shock if you touch
them, are usually: - ✔✔✔ Correct Answer > Black or red
- ✔✔✔ Correct Answer > Electrical Safety
More than 50 percent of electrocutions are caused by a worker
OSHA's electrical standards are based on: - ✔✔✔ Correct Answer > The coming in direct contact with: - ✔✔✔ Correct Answer > Energized
power lines
NEC
The OSHA standard requires flexible cords to be rated for: - ✔✔✔
What are the four main types of electrical injuries? - ✔✔✔ Correct
Correct Answer > Hard or extra-hard usage
Answer > Electrocution, electric shock, burns, indirect (e.g., a fall
from a ladder)
What is the most frequent violation of OSHA electrical standards?
- ✔✔✔ Correct Answer > Improper grounding of circuitry and
Electricity travels in closed circuits, and its normal route is
equipment
through a conductor. Electric shock occurs when: - ✔✔✔ Correct
Answer > The body becomes part of the circuit
The three elements of a basic program for electrical safety are: -
✔✔✔ Correct Answer > Recognize, evaluate and control
A shock's severity depends on: - ✔✔✔ Correct Answer > Length of
exposure to electricity
The amount of current and its frequency All portable electric tools that are damaged shall be: - ✔✔✔ Correct
Answer > Removed from use and tagged "Do Not Use"
, 5|Page 6|Page
If you have a three-prong plug and a two-hole receptacle, it is The majority of today's power line accidents occur because: - ✔✔✔
acceptable to: - ✔✔✔ Correct Answer > Use an adapter with an adapter Correct Answer > Of failure to maintain proper work distances
wire connected to a known ground
A ground-fault circuit interrupter (GFCI) protects workers from
All hazards involved in the use of power tools can be prevented shock by: - ✔✔✔ Correct Answer > Matching the amount of current
by following five basic safety rules: Keep all tools in good going into an electrical device against the amount returning from
condition with regular maintenance; examine each tool for the device and shutting down power if a ground fault is detected
damage before use; operate according to the manufacturer's
instructions; provide and use the proper protective equipment;
and: - ✔✔✔ Correct Answer > Use the right tool for the job AEGCP's are implemented on construction sites to oversee: - ✔✔✔
Correct Answer > All cord sets
Cord sets and equipment connected by plug and cord
Live parts of electric equipment operating at 50 volts or more
must be: - ✔✔✔ Correct Answer > Guarded against accidental contact Receptacles that are not part of a building or structure
While any employee is exposed to contact with parts of electric - ✔✔✔ Correct Answer > Fall Protection
equipment or circuits that have been de-energized, the circuits
energizing the parts shall be: - ✔✔✔ Correct Answer > Locked out or
The OSHA standard mandates that any time a worker is at a
tagged out or both
height of six feet or more, the worker is at risk and needs to be
protected. Most fatalities, however, happen when workers fall
Low voltage does not mean low hazard. - ✔✔✔ Correct Answer > True from: - ✔✔✔ Correct Answer > Roofs
The two best means of avoiding electrical shock or injury when Employers must ensure that all walking and working surfaces
working with power tools are: - ✔✔✔ Correct Answer > Insulation and have the structural integrity to: - ✔✔✔ Correct Answer > Support
grounding workers safely
