JCAHPO STUDY SET COA STUDY GUIDE
CARD UPDATED REAL EXAM UPDATE
2023 EXAMINATION TEST 2026 COMPLETE
QUESTIONS AND SOLUTIONS GRADED A+
⩥ The examiner often uses a working or trial lens to adjust for the
distance between the patients eye and the retinoscope. With a working
lens of +1.50 D, the working lens is usually held at: Answer: 66cm
⩥ The examiner is adjusting the lensometer. The eye piece should be:
Answer: Turned to its most plus position.
⩥ A complaint of the presbyopic patient is Answer: my arms are too
short
⩥ The patient has been prescribed eye drops and an ointment. Which of
the following instructions is incorrect? Answer: use gels before drops
⩥ You are using American cross-lined type target lensometer. Which of
the following is incorrect? Answer: Rotate the axis wheel so that the
target is lined up with the single line. Mark this down as the axis of the
cylinder.
, ⩥ When testing children with nystagmus, vision should be tested:
Answer: With both eyes open and also with one eye "fogged"
⩥ The bottom number of the notation 20/20 means Answer: The normal
eye can recognize optotypes of this size from 20 feet away
⩥ Which of the following is not part of patient preparation for
automated refractometry? Answer: covering one eye
⩥ Which patient would most likely benefits from using a Fresnel lens
Answer: a patient with diplopia
⩥ With the Goldman perimeter, calibration must be performed daily.
With automated perimetry, calibration will be checked: Answer:
automatically when the power switch is turned on
⩥ Which agency is charged with ensuring that employee health and
safety standards are met? Answer: OSHA
⩥ All of the following are elements of patients informed consent except:
Answer: giving the patient contact information for others who have had
the procedure.
⩥ Which is the correct purpose for a pressure patch? Answer: To keep
the eye closed
CARD UPDATED REAL EXAM UPDATE
2023 EXAMINATION TEST 2026 COMPLETE
QUESTIONS AND SOLUTIONS GRADED A+
⩥ The examiner often uses a working or trial lens to adjust for the
distance between the patients eye and the retinoscope. With a working
lens of +1.50 D, the working lens is usually held at: Answer: 66cm
⩥ The examiner is adjusting the lensometer. The eye piece should be:
Answer: Turned to its most plus position.
⩥ A complaint of the presbyopic patient is Answer: my arms are too
short
⩥ The patient has been prescribed eye drops and an ointment. Which of
the following instructions is incorrect? Answer: use gels before drops
⩥ You are using American cross-lined type target lensometer. Which of
the following is incorrect? Answer: Rotate the axis wheel so that the
target is lined up with the single line. Mark this down as the axis of the
cylinder.
, ⩥ When testing children with nystagmus, vision should be tested:
Answer: With both eyes open and also with one eye "fogged"
⩥ The bottom number of the notation 20/20 means Answer: The normal
eye can recognize optotypes of this size from 20 feet away
⩥ Which of the following is not part of patient preparation for
automated refractometry? Answer: covering one eye
⩥ Which patient would most likely benefits from using a Fresnel lens
Answer: a patient with diplopia
⩥ With the Goldman perimeter, calibration must be performed daily.
With automated perimetry, calibration will be checked: Answer:
automatically when the power switch is turned on
⩥ Which agency is charged with ensuring that employee health and
safety standards are met? Answer: OSHA
⩥ All of the following are elements of patients informed consent except:
Answer: giving the patient contact information for others who have had
the procedure.
⩥ Which is the correct purpose for a pressure patch? Answer: To keep
the eye closed
