AVIXA CTS CERTIFICATION EVALUATION
SET 2026 ANSWERS GUARANTEED PASS
⫸ What would a mechanical drawing be used for? Answer: location of
heating , plumbing and ventilation in a venue
⫸ How is the volume of a space calculated Answer: Length times width
times hight
⫸ What is the most important in formation to be gathered on a site visit
Answer: room size and layout
⫸ When conducting a site visit if a ladder is needed what type of ladder
should be used and why? Answer: fiberglass or wood in case a surface
might be electrified
⫸ A scale drawing unit of 1/1:20 signifies what type of scale-drawing
measurement? Answer: a common metric scale
⫸ When considering customer constraints for ___, the signal type,
distance from viewers, aspect ratio and source resolution are all limiting
factors. Answer: image display
⫸ When documenting requirements for network services, a formal
technical document called a(n) _______ is often utilized. Answer: SLA(
service level agreement)
, ⫸ One major difference between the Service Level Agreement process
and the traditional Program Report is the SLA focuses upon Answer:
Measurement of service through monitoring procedures
⫸ "When gathering and documenting site information and requirements
for the overall functional needs of an AV system, a document called the
_____ is usually produced." Answer: program report
⫸ "When gathering and documenting site information and requirements
for the overall functional needs of an AV system, a document called the
_____ is usually produced." Answer: " Take pictures for reference and
note any potential conflicts or obstructions"
⫸ "When collecting information during a site survey, it is good practice
to do which of the following?" Answer: "Take pictures for reference and
note any potential conflicts or obstructions"
⫸ "What are the primary sources of ambient noise within a room that is
being used for AV presentations?
" Answer: " HVAC (mechanical) systems, projectors, displays and
power amplifiers"
⫸ " If the displayed text size in a projected presentation is 3 inches (76
mm), then the viewer should not be farther away than ___ for reading
the text." Answer: "450 inches (11,400 mm)"
SET 2026 ANSWERS GUARANTEED PASS
⫸ What would a mechanical drawing be used for? Answer: location of
heating , plumbing and ventilation in a venue
⫸ How is the volume of a space calculated Answer: Length times width
times hight
⫸ What is the most important in formation to be gathered on a site visit
Answer: room size and layout
⫸ When conducting a site visit if a ladder is needed what type of ladder
should be used and why? Answer: fiberglass or wood in case a surface
might be electrified
⫸ A scale drawing unit of 1/1:20 signifies what type of scale-drawing
measurement? Answer: a common metric scale
⫸ When considering customer constraints for ___, the signal type,
distance from viewers, aspect ratio and source resolution are all limiting
factors. Answer: image display
⫸ When documenting requirements for network services, a formal
technical document called a(n) _______ is often utilized. Answer: SLA(
service level agreement)
, ⫸ One major difference between the Service Level Agreement process
and the traditional Program Report is the SLA focuses upon Answer:
Measurement of service through monitoring procedures
⫸ "When gathering and documenting site information and requirements
for the overall functional needs of an AV system, a document called the
_____ is usually produced." Answer: program report
⫸ "When gathering and documenting site information and requirements
for the overall functional needs of an AV system, a document called the
_____ is usually produced." Answer: " Take pictures for reference and
note any potential conflicts or obstructions"
⫸ "When collecting information during a site survey, it is good practice
to do which of the following?" Answer: "Take pictures for reference and
note any potential conflicts or obstructions"
⫸ "What are the primary sources of ambient noise within a room that is
being used for AV presentations?
" Answer: " HVAC (mechanical) systems, projectors, displays and
power amplifiers"
⫸ " If the displayed text size in a projected presentation is 3 inches (76
mm), then the viewer should not be farther away than ___ for reading
the text." Answer: "450 inches (11,400 mm)"
