TFM10 NFPA 24 UPDATED EVALUATION EXAM QUESTIONS
AND SOLUTIONS RATED A+
✔✔NFPA 780 - ✔✔Standard for the Installation of Lightning Protection Systems
✔✔NFPA 1961 - ✔✔Standard on Fire Hose
✔✔NFPA 1963 - ✔✔Standard for Fire Hose Connections
✔✔ASME B1.20.1 - ✔✔Pipe Threads, General Purpose (Inch)
✔✔ASME B16.1 - ✔✔Gray Iron Pipe Flanges and Flanged Fittings - CL 25, 125, and
250
✔✔ASME B16.3 - ✔✔Malleable Iron Threaded Fittings - CL150 & CL300
✔✔ASME B16.4 - ✔✔Gray Iron Threaded Fittings - CL 125 & 250
✔✔ASME B16.15 - ✔✔Cast Copper Alloy Threaded Fittings - CL 125 & 250
✔✔ASME B16.18 - ✔✔Cast Copper Alloy Solder Joint Pressure Fittings
✔✔ASME B16.22 - ✔✔Wrought Copper and Copper Aloy Solder Joint Pressure Fittings
✔✔ASTM A53/A53M - ✔✔Standard Specification for Pipe, Steel, Black & Hot-Dipped,
Zinc-Coated, Welded and Seamless
✔✔ASTM A135/A135M - ✔✔Standard Specification for Electric Resistance Welded
(ERW) Steel Pipe
✔✔ASTM A312/312M - ✔✔Standard Specification for Seamless, Welded, and Heavily
Cold Worked Austenitic SS Pipes
✔✔ASTM A403/A403M - ✔✔Specification for Wrought Austenitic SS Pipe Fittings
✔✔ASTM A795/795M - ✔✔Standard Specification for Black and Hot-Dipped Zinc
Coated (Galvanized) Welded and Seamless Steel Pipe for FIRE PROTECTION USE
✔✔ASTM B43 - ✔✔Specification for Seamless Red Brass Pipe, Standard Sizes
✔✔ASTM B75/B75M - ✔✔Specification for Seamless Copper Tube
✔✔ASTM B88 - ✔✔Specification for Seamless Copper Water Tube
, ✔✔ASTM B251/B251M - ✔✔Standard Specification for General Requirements for
Wrought Seamless Copper and Copper-Alloy Tube
✔✔ASTM SI10 - ✔✔American National Standard for Metric Practice
✔✔AWWA C104/A21.4 - ✔✔Cement-Mortar Lining for Ductile Iron Pipe & Fittings
✔✔AWWA C105/A21.5 - ✔✔Polyethylene Encasement for Ductile-Iron Pipe Systems
✔✔AWWA C110/A21.10 - ✔✔Ductile-Iron and Gray-Iron Fittings
✔✔AWWA C111/A21.11 - ✔✔Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and
Fittings
✔✔AWWA C115/A21.15 - ✔✔Flanged Ductile-Iron Pipe with Ductile-Iron or Gray-Iron
Threaded Flanges
✔✔AWWA C150/A21.50 - ✔✔Thickness Design of Ductile-Iron Pipe
✔✔AWWA C151/A21.51 - ✔✔Ductile-Iron Pipe, Centrifugally Cast
✔✔AWWA C153/A21.53 - ✔✔Ductile-Iron Compact Fittings
✔✔AWWA C300 - ✔✔Reinforced Concrete Pressure Pipe, Steel-Cylinder Type
✔✔AWWA C301 - ✔✔Prestressed Concrete Pressure Pipe, Steel-Cylinder Type
✔✔AWWA C302 - ✔✔Reinforced Concrete Pressure Pipe, Noncylinder Type
✔✔AWWA C303 - ✔✔Concrete Pressure Pipe, Bar-Wrapped, Steel-Cylinder Type
✔✔AWWA C600 - ✔✔Installation of Ductile-Iron Water Mains and Their Appurtenances
✔✔AWWA C602 - ✔✔Cement-Mortar Lining of Water Pipe Lines in Place, 4in and
Larger
✔✔AWWA C900 - ✔✔Polyvinyl Chloride (PVC) Pressure Pipe and Fabricated Fittings,
4" to 60"
✔✔AWWA C909 - ✔✔Molecularly Oriented Polyvinyl Chloride (PVCO) Pressure Pipe,
4" to 24" for Water, Wastewater, and Reclaimed Water Service
✔✔AWWA M9 - ✔✔Concrete Pressure Pipe
AND SOLUTIONS RATED A+
✔✔NFPA 780 - ✔✔Standard for the Installation of Lightning Protection Systems
✔✔NFPA 1961 - ✔✔Standard on Fire Hose
✔✔NFPA 1963 - ✔✔Standard for Fire Hose Connections
✔✔ASME B1.20.1 - ✔✔Pipe Threads, General Purpose (Inch)
✔✔ASME B16.1 - ✔✔Gray Iron Pipe Flanges and Flanged Fittings - CL 25, 125, and
250
✔✔ASME B16.3 - ✔✔Malleable Iron Threaded Fittings - CL150 & CL300
✔✔ASME B16.4 - ✔✔Gray Iron Threaded Fittings - CL 125 & 250
✔✔ASME B16.15 - ✔✔Cast Copper Alloy Threaded Fittings - CL 125 & 250
✔✔ASME B16.18 - ✔✔Cast Copper Alloy Solder Joint Pressure Fittings
✔✔ASME B16.22 - ✔✔Wrought Copper and Copper Aloy Solder Joint Pressure Fittings
✔✔ASTM A53/A53M - ✔✔Standard Specification for Pipe, Steel, Black & Hot-Dipped,
Zinc-Coated, Welded and Seamless
✔✔ASTM A135/A135M - ✔✔Standard Specification for Electric Resistance Welded
(ERW) Steel Pipe
✔✔ASTM A312/312M - ✔✔Standard Specification for Seamless, Welded, and Heavily
Cold Worked Austenitic SS Pipes
✔✔ASTM A403/A403M - ✔✔Specification for Wrought Austenitic SS Pipe Fittings
✔✔ASTM A795/795M - ✔✔Standard Specification for Black and Hot-Dipped Zinc
Coated (Galvanized) Welded and Seamless Steel Pipe for FIRE PROTECTION USE
✔✔ASTM B43 - ✔✔Specification for Seamless Red Brass Pipe, Standard Sizes
✔✔ASTM B75/B75M - ✔✔Specification for Seamless Copper Tube
✔✔ASTM B88 - ✔✔Specification for Seamless Copper Water Tube
, ✔✔ASTM B251/B251M - ✔✔Standard Specification for General Requirements for
Wrought Seamless Copper and Copper-Alloy Tube
✔✔ASTM SI10 - ✔✔American National Standard for Metric Practice
✔✔AWWA C104/A21.4 - ✔✔Cement-Mortar Lining for Ductile Iron Pipe & Fittings
✔✔AWWA C105/A21.5 - ✔✔Polyethylene Encasement for Ductile-Iron Pipe Systems
✔✔AWWA C110/A21.10 - ✔✔Ductile-Iron and Gray-Iron Fittings
✔✔AWWA C111/A21.11 - ✔✔Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and
Fittings
✔✔AWWA C115/A21.15 - ✔✔Flanged Ductile-Iron Pipe with Ductile-Iron or Gray-Iron
Threaded Flanges
✔✔AWWA C150/A21.50 - ✔✔Thickness Design of Ductile-Iron Pipe
✔✔AWWA C151/A21.51 - ✔✔Ductile-Iron Pipe, Centrifugally Cast
✔✔AWWA C153/A21.53 - ✔✔Ductile-Iron Compact Fittings
✔✔AWWA C300 - ✔✔Reinforced Concrete Pressure Pipe, Steel-Cylinder Type
✔✔AWWA C301 - ✔✔Prestressed Concrete Pressure Pipe, Steel-Cylinder Type
✔✔AWWA C302 - ✔✔Reinforced Concrete Pressure Pipe, Noncylinder Type
✔✔AWWA C303 - ✔✔Concrete Pressure Pipe, Bar-Wrapped, Steel-Cylinder Type
✔✔AWWA C600 - ✔✔Installation of Ductile-Iron Water Mains and Their Appurtenances
✔✔AWWA C602 - ✔✔Cement-Mortar Lining of Water Pipe Lines in Place, 4in and
Larger
✔✔AWWA C900 - ✔✔Polyvinyl Chloride (PVC) Pressure Pipe and Fabricated Fittings,
4" to 60"
✔✔AWWA C909 - ✔✔Molecularly Oriented Polyvinyl Chloride (PVCO) Pressure Pipe,
4" to 24" for Water, Wastewater, and Reclaimed Water Service
✔✔AWWA M9 - ✔✔Concrete Pressure Pipe
