Brannigan's Chapter 6 || A+ Guaranteed.
Recently fire fighter safety has become a goal in building and fire codes. What requirement has
come out of this? correct answers requirement to place shaftway signs on the exterior of
buildings
Inflammable: correct answers an old term. this does not mean "not flammable". it actually means
flammable. appears in some old code
What is a non-combustible building? correct answers no such thing. non-combustible buildings
can contain significant quantities of combustibles.
Fire resistance rating correct answers quality given to a wall, floor or column assembly after
testing
What are some of the generally accepted indications of imminent collapse? correct answers
Floors or roof softening
Water flowing through bricks
Smoke pushing out of mortar joints
Strange noises
"Protected combustible" classification: correct answers combustible structures but protected with
gypsum board and other rated assemblies
NFPA 251: correct answers Standard Method of Fire Tests of Building Construction and
Materials.
NFPA 251 similar to what other two standards? correct answers UL 263 (Underwriter's Labs)
ASTM E-119 (American Society for Testing and Materials)
Fire resistance is directed at ensuring life safety. (T/F) correct answers False. It can help, but no
guarantee.
The reproducible fire test follows a standard what? correct answers standard time - temperature
curve
The fire test represents modern fires accurately. (t/f) correct answers false. it represents small
burns conducted in tests in 1918.
Floor and roof assemblies often tested in what two different ways? correct answers Restrained
and unrestrained. Restrained more severe, as they may buckle if they elongate.
Assemblies that pass fire ratings tests are rated in units of what? correct answers Hours. 1, 2, 3 or
more.
, Being listed as fire rated is the same as being approved. (t/f) correct answers False. local
authorities have to approve materials and may pick materials or assemblies from the listings to
approve.
Components of an assembly don't have the same fire rating as the assembly. (t/f) correct answers
True. the components cannot be considered apart from the listed assembly.
The time ratings given to fire resistive assemblies corrolate to actual fires. (t/f) correct answers
false. the ratings have no bearing on real fire conditions. they simply provide a measure of
comparison between assemblies.
The test standard for noncombustible floors was developed for fires where? correct answers for
fire only burning below the floor assembly
If a fire starts inside the floor assembly, what fire rating can be used? correct answers none.
Kentucky Beverly Hills Supper Club Fire. When? What contributed to fire spread? correct
answers 1977.
Carpeting on the walls.
NFPA 255: correct answers Standard method for test of surface burning characteristics of
building materials
What test is the basis for flame spread in NFPA 255? correct answers the Steiner tunnel test
What is the sample size in a steiner tunnel test? correct answers 25 feet long and 2 feet wide
Two comparison points in Steiner test? correct answers Flame spread over inorganic reinforced
cement board is set at 0.
Flame spread over red oak is set at 100. These two points allow all other materials to be rated on
this scale.
Three categories of flame spread and there corresponding numbers? correct answers Class A: 0 -
25
Class B: 26 - 75
Class C: 76 - 200
The model building code allows for a reduction in class when what is available? correct answers
Sprinklers. But in no case can the rating be less than Class C.
Radiant Panel Flame Spread Test (ASTM E-162) tests what size panels? correct answers 6 x 18
in.
FM Approvals Corner Test simulates actual fire, how big is the corner? correct answers 25' high
East wall is 50' long
South wall is 37' long
Recently fire fighter safety has become a goal in building and fire codes. What requirement has
come out of this? correct answers requirement to place shaftway signs on the exterior of
buildings
Inflammable: correct answers an old term. this does not mean "not flammable". it actually means
flammable. appears in some old code
What is a non-combustible building? correct answers no such thing. non-combustible buildings
can contain significant quantities of combustibles.
Fire resistance rating correct answers quality given to a wall, floor or column assembly after
testing
What are some of the generally accepted indications of imminent collapse? correct answers
Floors or roof softening
Water flowing through bricks
Smoke pushing out of mortar joints
Strange noises
"Protected combustible" classification: correct answers combustible structures but protected with
gypsum board and other rated assemblies
NFPA 251: correct answers Standard Method of Fire Tests of Building Construction and
Materials.
NFPA 251 similar to what other two standards? correct answers UL 263 (Underwriter's Labs)
ASTM E-119 (American Society for Testing and Materials)
Fire resistance is directed at ensuring life safety. (T/F) correct answers False. It can help, but no
guarantee.
The reproducible fire test follows a standard what? correct answers standard time - temperature
curve
The fire test represents modern fires accurately. (t/f) correct answers false. it represents small
burns conducted in tests in 1918.
Floor and roof assemblies often tested in what two different ways? correct answers Restrained
and unrestrained. Restrained more severe, as they may buckle if they elongate.
Assemblies that pass fire ratings tests are rated in units of what? correct answers Hours. 1, 2, 3 or
more.
, Being listed as fire rated is the same as being approved. (t/f) correct answers False. local
authorities have to approve materials and may pick materials or assemblies from the listings to
approve.
Components of an assembly don't have the same fire rating as the assembly. (t/f) correct answers
True. the components cannot be considered apart from the listed assembly.
The time ratings given to fire resistive assemblies corrolate to actual fires. (t/f) correct answers
false. the ratings have no bearing on real fire conditions. they simply provide a measure of
comparison between assemblies.
The test standard for noncombustible floors was developed for fires where? correct answers for
fire only burning below the floor assembly
If a fire starts inside the floor assembly, what fire rating can be used? correct answers none.
Kentucky Beverly Hills Supper Club Fire. When? What contributed to fire spread? correct
answers 1977.
Carpeting on the walls.
NFPA 255: correct answers Standard method for test of surface burning characteristics of
building materials
What test is the basis for flame spread in NFPA 255? correct answers the Steiner tunnel test
What is the sample size in a steiner tunnel test? correct answers 25 feet long and 2 feet wide
Two comparison points in Steiner test? correct answers Flame spread over inorganic reinforced
cement board is set at 0.
Flame spread over red oak is set at 100. These two points allow all other materials to be rated on
this scale.
Three categories of flame spread and there corresponding numbers? correct answers Class A: 0 -
25
Class B: 26 - 75
Class C: 76 - 200
The model building code allows for a reduction in class when what is available? correct answers
Sprinklers. But in no case can the rating be less than Class C.
Radiant Panel Flame Spread Test (ASTM E-162) tests what size panels? correct answers 6 x 18
in.
FM Approvals Corner Test simulates actual fire, how big is the corner? correct answers 25' high
East wall is 50' long
South wall is 37' long