NCIDQ Practice Exam Questions – IDFX || PROVEN
EXAM QUESTIONS & ANSWERS.
Your client would like to relocate from an existing ground floor location to several floors in a
new building. You have been hired to evaluate the feasibility of the move. Which action should
you take FIRST?
A. Interview several employees from each division of the company
B. Determine the usable floor area of each floor of the new building
C. Assess which spaces will make up the core of the building
D. Locate all load-bearing components on each floor correct answers Answer: B
When are three-dimensional studies MOST useful in the design process?
A. In the final contract document presentation
B. During the programming phase
C. As a rough sketch during the schematic stage
D. Throughout the entire design process correct answers Answer: D
You are renovating a healthcare facility for patients with mental and psychological disorders.
Based on research on color in healing environments, which of the following is the MOST
appropriate wall color choice for the individual patient rooms?
A. Red-orange
B. Blue-green
C. Yellow
D. Violet correct answers Answer: B
You are field verifying a space to document existing conditions. Which of the following steps is
MOST important?
A. Matching the dimensioning system that will be used to develop CADD drawings
B. Establishing a dimension convention prior to commencing site work
C. Indicating field measurements in inches for simplicity
D. Recording clear door width and frames separately correct answers Answer: B
What does the horizontal line in a two-point perspective suggest?
A. A line parallel to the picture plane
B. A sight line projecting from the station point
C. A line perpendicular to the line of projection
D. A line representing eye-level height correct answers Answer: D
What must you determine FIRST before space planning a commercial building's interior?
A. Number of exits and means of egress required
B. Occupancy classification for the building
C. Construction type
D. Maximum occupancy load correct answers Answer: B
, The low bidder for a raised flooring contract submits pricing on four product lines that meet
specifications. All four products are below budget. The client wants you to use the least
expensive product, but you know that it is new to the market and has no performance record.
What should you do before making your recommendation?
A. Have the supplier provide references and review them with the client.
B. Have the supplier provide finish samples and review them with the client.
C. Recommend the least expensive product, as the client requested.
D. Review product literature to determine product suitability. correct answers Answer: A
In designing facilities for the widest possible range of users, regardless of mobility, physical
ability, size, age, or cognitive skills, what is the underlying principle?
A. Universal design
B. Accessible design
C. Ergonomic Design
D. Anthropometric Design correct answers Answer: A
According to BOMA standards, net area is measured for a tenant suite from the:
A. outside of the exterior wall to the centerline of the opposite interior partition.
B. center of the exterior wall to the inside of the opposite interior partition.
C. dominant inside finished surface of the exterior wall to the centerline of the opposite interior
partition.
D. dominant inside finished surface of the exterior wall to the inside of the opposite interior
partition. correct answers Answer: D
What is the BEST way to understand a client's corporate culture when developing a program
document?
A. Conduct interviews with each user group
B. Distribute a questionnaire to employees
C. Interview the president/CEO
D. Tour the facility with the facility manager correct answers Answer: A
Your firm is currently involved in the design of a convention center that is funded from investors
of public and private monies. What means of visual presentation will BEST communicate the
conceptual design of the large space to the community involved?
A. Conceptual perspective sketches with scaled working models
B. Conceptual isometric drawings with detailed elevations
C. Conceptual perspective sketches with scaled elevations
D. Conceptual isometric drawings with building sections correct answers Answer: A
Which of the following documents are MOST likely to be included in the design development
package?
A. Technical drawings, schedules, and specifications required to price, build, and install the work
B. Any documents required to communicate compliance with applicable codes to local
authorities responsible for issuance of permits
C. Technical drawings, images, and samples communicating design intent and client
requirements
EXAM QUESTIONS & ANSWERS.
Your client would like to relocate from an existing ground floor location to several floors in a
new building. You have been hired to evaluate the feasibility of the move. Which action should
you take FIRST?
A. Interview several employees from each division of the company
B. Determine the usable floor area of each floor of the new building
C. Assess which spaces will make up the core of the building
D. Locate all load-bearing components on each floor correct answers Answer: B
When are three-dimensional studies MOST useful in the design process?
A. In the final contract document presentation
B. During the programming phase
C. As a rough sketch during the schematic stage
D. Throughout the entire design process correct answers Answer: D
You are renovating a healthcare facility for patients with mental and psychological disorders.
Based on research on color in healing environments, which of the following is the MOST
appropriate wall color choice for the individual patient rooms?
A. Red-orange
B. Blue-green
C. Yellow
D. Violet correct answers Answer: B
You are field verifying a space to document existing conditions. Which of the following steps is
MOST important?
A. Matching the dimensioning system that will be used to develop CADD drawings
B. Establishing a dimension convention prior to commencing site work
C. Indicating field measurements in inches for simplicity
D. Recording clear door width and frames separately correct answers Answer: B
What does the horizontal line in a two-point perspective suggest?
A. A line parallel to the picture plane
B. A sight line projecting from the station point
C. A line perpendicular to the line of projection
D. A line representing eye-level height correct answers Answer: D
What must you determine FIRST before space planning a commercial building's interior?
A. Number of exits and means of egress required
B. Occupancy classification for the building
C. Construction type
D. Maximum occupancy load correct answers Answer: B
, The low bidder for a raised flooring contract submits pricing on four product lines that meet
specifications. All four products are below budget. The client wants you to use the least
expensive product, but you know that it is new to the market and has no performance record.
What should you do before making your recommendation?
A. Have the supplier provide references and review them with the client.
B. Have the supplier provide finish samples and review them with the client.
C. Recommend the least expensive product, as the client requested.
D. Review product literature to determine product suitability. correct answers Answer: A
In designing facilities for the widest possible range of users, regardless of mobility, physical
ability, size, age, or cognitive skills, what is the underlying principle?
A. Universal design
B. Accessible design
C. Ergonomic Design
D. Anthropometric Design correct answers Answer: A
According to BOMA standards, net area is measured for a tenant suite from the:
A. outside of the exterior wall to the centerline of the opposite interior partition.
B. center of the exterior wall to the inside of the opposite interior partition.
C. dominant inside finished surface of the exterior wall to the centerline of the opposite interior
partition.
D. dominant inside finished surface of the exterior wall to the inside of the opposite interior
partition. correct answers Answer: D
What is the BEST way to understand a client's corporate culture when developing a program
document?
A. Conduct interviews with each user group
B. Distribute a questionnaire to employees
C. Interview the president/CEO
D. Tour the facility with the facility manager correct answers Answer: A
Your firm is currently involved in the design of a convention center that is funded from investors
of public and private monies. What means of visual presentation will BEST communicate the
conceptual design of the large space to the community involved?
A. Conceptual perspective sketches with scaled working models
B. Conceptual isometric drawings with detailed elevations
C. Conceptual perspective sketches with scaled elevations
D. Conceptual isometric drawings with building sections correct answers Answer: A
Which of the following documents are MOST likely to be included in the design development
package?
A. Technical drawings, schedules, and specifications required to price, build, and install the work
B. Any documents required to communicate compliance with applicable codes to local
authorities responsible for issuance of permits
C. Technical drawings, images, and samples communicating design intent and client
requirements
