GW RailRoad Test-EXAM STUDY GUIDE
2026/2027 COMPLETE QUESTIONS WITH
VERIFIED CORRECT ANSWERS || 100%
GUARANTEED PASS <NEWEST VERSION>
Only a roadway worker who is qualified as an employee in-charge (EIC) shall establish or have
control over working limits for the purpose of establishing on-track safety.
True
The space between Roadway Machine(s) and Roadway Worker(s) on the same track will be a
minimum of ______ feet.
50
Train approach warning shall be given in the sufficient time to enable each roadway worker to
move and occupy a previously arranged place of safety not less than ___ seconds before the
arrival of a train, engine or other roadway equipment moving at the maximum speed
authorized on the track at the work site.
15
The use of any electronic device is prohibited if that use would interfere with an employee's
performance of safety related duties.
true
A Watchman/lookout's sole duty is to look out for approaching trains/ on-track equipment
and provide warning to allow Roadway Workers to move to and accupy the designated place
of safety at least ____ seconds before the arrival of trains/ on-track equipment.
15
Never cross tracks closer than ____ feet from standing equipment.
50
An employee who requests a track authority must inform the train dispatcher of:
,All of the above
the employee-in-charge of the Form B must contact the __________ prior to occupying the
Form B limits. A job briefing will be conducted which will include an update of any train or on-
track equipment movements within the limits as well as documenting the time of occupancy
of the Form B.
Train Dispatcher
the term "qualified" as used in connection with Railroad Workplace Safety, means a status
attained by an employee who:
All of the above
Individual Train Detection (ITD) is a form of ON-Track safety that can be used only by a:
Lone Worker
Which of the following should be included in a complete Job Briefing?
All of the above
every roadway worker that depends upon Train Approach Warning for on-track safety shall
maintain a position that will enable him or her to receive a train approach warning
communicated by a watchman/lookout at any time while on-track safety is provided by train
approach warning.
True
If there is a safety related issue to be resolved through the access to the On-track safety
manual, then the roadway work group or lone worker must move to the clear of the track
until the issue is resolved.
true
When not in use, a cell phone must be:
turned off and stowed out of sight
Yellow-red and Red Flags must be displayed as required in the operating rules, prior to the
Form B being occupied by Roadway Workers (GCOR rules 5.4.3, 5.4.6 and 5.4.7) Yellow-red
flags must be displayed ______ miles before the restricted area.
2
Job Briefing must be updated after:
, A meal Period.
A Lone Worker who chooses to use individual train detection to establish on-track safety shall
first complete a written Statement of ON-track Safety.
True
Watchmen may be assigned other job-related duties while functioning as a watchman.
False
the placement of an individual or an item of equipment in such proximity to a track that the
individual or equipment could be struck by a moving train or on-track equipment, or in case is
withing 4 ft of the field side of the near running rail for a worker and 7 ft for vehicles and
machinery is known as:
Fouling a Track
If there is ever any quesitons concerning safety, employees must stop and ask before
proceeding.
True
Working limits may be established on __________ tracks by use of the provisions of
Inaccessible Track.
Not-Controlled
Railroad employees or employees of a contractor operating roadway equipment must never
leave controls of the equipment unattended. If the employee has a need to leave the
equipment for any reason:
All of the above
Train approach warning may be used to provide on-track safety for a roadway work group
using roadway maintenance machines, equipment, or material that cannot be readily
removed by hand.
False
Training for Roadway workers shall be provided to new employees required to work in the
foul of a track. Roadway Workers must be familiar with railroad tracks and understand the
space around them when and were on-track safety is required. They must be familiar with
other persons functions and responsibilities with on-track safety procedures. they must
understand signals given by watchman and know the procedures to clear the track. After
2026/2027 COMPLETE QUESTIONS WITH
VERIFIED CORRECT ANSWERS || 100%
GUARANTEED PASS <NEWEST VERSION>
Only a roadway worker who is qualified as an employee in-charge (EIC) shall establish or have
control over working limits for the purpose of establishing on-track safety.
True
The space between Roadway Machine(s) and Roadway Worker(s) on the same track will be a
minimum of ______ feet.
50
Train approach warning shall be given in the sufficient time to enable each roadway worker to
move and occupy a previously arranged place of safety not less than ___ seconds before the
arrival of a train, engine or other roadway equipment moving at the maximum speed
authorized on the track at the work site.
15
The use of any electronic device is prohibited if that use would interfere with an employee's
performance of safety related duties.
true
A Watchman/lookout's sole duty is to look out for approaching trains/ on-track equipment
and provide warning to allow Roadway Workers to move to and accupy the designated place
of safety at least ____ seconds before the arrival of trains/ on-track equipment.
15
Never cross tracks closer than ____ feet from standing equipment.
50
An employee who requests a track authority must inform the train dispatcher of:
,All of the above
the employee-in-charge of the Form B must contact the __________ prior to occupying the
Form B limits. A job briefing will be conducted which will include an update of any train or on-
track equipment movements within the limits as well as documenting the time of occupancy
of the Form B.
Train Dispatcher
the term "qualified" as used in connection with Railroad Workplace Safety, means a status
attained by an employee who:
All of the above
Individual Train Detection (ITD) is a form of ON-Track safety that can be used only by a:
Lone Worker
Which of the following should be included in a complete Job Briefing?
All of the above
every roadway worker that depends upon Train Approach Warning for on-track safety shall
maintain a position that will enable him or her to receive a train approach warning
communicated by a watchman/lookout at any time while on-track safety is provided by train
approach warning.
True
If there is a safety related issue to be resolved through the access to the On-track safety
manual, then the roadway work group or lone worker must move to the clear of the track
until the issue is resolved.
true
When not in use, a cell phone must be:
turned off and stowed out of sight
Yellow-red and Red Flags must be displayed as required in the operating rules, prior to the
Form B being occupied by Roadway Workers (GCOR rules 5.4.3, 5.4.6 and 5.4.7) Yellow-red
flags must be displayed ______ miles before the restricted area.
2
Job Briefing must be updated after:
, A meal Period.
A Lone Worker who chooses to use individual train detection to establish on-track safety shall
first complete a written Statement of ON-track Safety.
True
Watchmen may be assigned other job-related duties while functioning as a watchman.
False
the placement of an individual or an item of equipment in such proximity to a track that the
individual or equipment could be struck by a moving train or on-track equipment, or in case is
withing 4 ft of the field side of the near running rail for a worker and 7 ft for vehicles and
machinery is known as:
Fouling a Track
If there is ever any quesitons concerning safety, employees must stop and ask before
proceeding.
True
Working limits may be established on __________ tracks by use of the provisions of
Inaccessible Track.
Not-Controlled
Railroad employees or employees of a contractor operating roadway equipment must never
leave controls of the equipment unattended. If the employee has a need to leave the
equipment for any reason:
All of the above
Train approach warning may be used to provide on-track safety for a roadway work group
using roadway maintenance machines, equipment, or material that cannot be readily
removed by hand.
False
Training for Roadway workers shall be provided to new employees required to work in the
foul of a track. Roadway Workers must be familiar with railroad tracks and understand the
space around them when and were on-track safety is required. They must be familiar with
other persons functions and responsibilities with on-track safety procedures. they must
understand signals given by watchman and know the procedures to clear the track. After
