Audinate Dante Level 1
Questions with 100%
Correct Answers 2025-
2026
Which ANSWER best describes the JPEG2000 encoding process? - ANSWER
There is a "visually lossless" impact on the first encoding. Further encode/decode
processes will experience no further loss.
Interlaced video draws all the odd lines, then all the even lines. This creates two
"fields" for each frame. - ANSWER -The interlaced signal contains two fields of a
video frame captured consecutively. This enhances motion perception to the
viewer, and reduces flicker.
JPEG2000 codecs are used in digital cinema rooms today. It is visually lossless,
providing excellent results for both video and computer graphics (like spreadsheets
and slide presentations). - ANSWER -The JPEG2000 offers sharp quality and
intense colour definition with a visual accuracy. It is well-adopted in professional
use cases.
What factors significantly affect the overall bandwidth demands of a compressed
video flow? (Select all that apply.) - ANSWER -The video frame resolution (i.e. -
, 1080p vs 4K)
The chroma sampling (i.e. - 4:4:4 vs 4:2:0)
The frame rate (ie 24fps vs 60fps)
On a Dante network, a single clock leader is established to manage all audio
sample rates and video frame rates. - ANSWER -A single Clock Leader on the
network is able to keep all followers synchronised, regardless of their sample-rates
or frame-rates.
JPEG2000 codecs process video frames in groups. If a packet is corrupted, the
picture will automatically recover when the current group of frames ends and the
next keyframe arrives. It could be several frames. - ANSWER -The JPEG2000
codec is an intraframe codec capturing each frame individually.
Which IP Range is not designated for use on a local network? - ANSWER
8.8.__.__
Many Dante products will provide a Dante port and "Manufacturer Control" port
that is totally separate. The separate port might be used to remote control a mixer,
program a DSP, or steer a PTZ camera.
How do you set the IP address for the manufacturer's control port? - ANSWER
Read the instruction manual for the product. Setting the manufacturer's control port
is unrelated to Dante, and thus it can be different for each product line.
On a network switch, any cable can plug in anywhere. However, a best practice
for cable management is to start -from the first port working your way up and - from the last port
working your way backwards. - ANSWER -network endpoints,
trunk lines
If a device has obtained an IP address using Link Local, which IP configuration
would be within its subnet - ANSWER -IP Address: 169.254.189.23 Subnet Mask:
255.255.0.0
Neutrik etherCON ports must be populated by Neutrik etherCON cables. -
ANSWER -The Neutrik etherCON port provides an RJ45 at the center and thus it
does accept standard Ethernet cables.
Questions with 100%
Correct Answers 2025-
2026
Which ANSWER best describes the JPEG2000 encoding process? - ANSWER
There is a "visually lossless" impact on the first encoding. Further encode/decode
processes will experience no further loss.
Interlaced video draws all the odd lines, then all the even lines. This creates two
"fields" for each frame. - ANSWER -The interlaced signal contains two fields of a
video frame captured consecutively. This enhances motion perception to the
viewer, and reduces flicker.
JPEG2000 codecs are used in digital cinema rooms today. It is visually lossless,
providing excellent results for both video and computer graphics (like spreadsheets
and slide presentations). - ANSWER -The JPEG2000 offers sharp quality and
intense colour definition with a visual accuracy. It is well-adopted in professional
use cases.
What factors significantly affect the overall bandwidth demands of a compressed
video flow? (Select all that apply.) - ANSWER -The video frame resolution (i.e. -
, 1080p vs 4K)
The chroma sampling (i.e. - 4:4:4 vs 4:2:0)
The frame rate (ie 24fps vs 60fps)
On a Dante network, a single clock leader is established to manage all audio
sample rates and video frame rates. - ANSWER -A single Clock Leader on the
network is able to keep all followers synchronised, regardless of their sample-rates
or frame-rates.
JPEG2000 codecs process video frames in groups. If a packet is corrupted, the
picture will automatically recover when the current group of frames ends and the
next keyframe arrives. It could be several frames. - ANSWER -The JPEG2000
codec is an intraframe codec capturing each frame individually.
Which IP Range is not designated for use on a local network? - ANSWER
8.8.__.__
Many Dante products will provide a Dante port and "Manufacturer Control" port
that is totally separate. The separate port might be used to remote control a mixer,
program a DSP, or steer a PTZ camera.
How do you set the IP address for the manufacturer's control port? - ANSWER
Read the instruction manual for the product. Setting the manufacturer's control port
is unrelated to Dante, and thus it can be different for each product line.
On a network switch, any cable can plug in anywhere. However, a best practice
for cable management is to start -from the first port working your way up and - from the last port
working your way backwards. - ANSWER -network endpoints,
trunk lines
If a device has obtained an IP address using Link Local, which IP configuration
would be within its subnet - ANSWER -IP Address: 169.254.189.23 Subnet Mask:
255.255.0.0
Neutrik etherCON ports must be populated by Neutrik etherCON cables. -
ANSWER -The Neutrik etherCON port provides an RJ45 at the center and thus it
does accept standard Ethernet cables.
