1|Page
MKC SWE USCG EXAM NEWEST 2026 ACTUAL
VERIFIED EXAM WITH COMPLETE QUESTIONS AND
CORRECT DETAILED ANSWERS (100% VERIFIED
ANSWERS) |ALREADY GRADED A+| ||NEWEST
EXAM!!||
Boiler feed water feed water temperature shall be kept at
approximant _____ to assist in the removal of dissolved
oxygen? - Answer-200F
The dehumidifier shall maintain air in the MRG casing at
less than _____% relative humidity? - Answer-35%
Do not fill uncompensated overflow tanks above _____
import? - Answer-80%
Stripping tailpipes are _____ from the lowest point in the
tank? - Answer-¾ of an inch
When assembling a gate valve the gate should be in
_____ position before tighten the bonnet bolt? - Answer-
Half Open
,2|Page
When you fill the bottle for NOAP how full should you fill
the bottle? - Answer-1ml / Completely Full
When conducting a static load test what should a newly
installed or structurally repaired or overhauled deck fittings
be tested to and how long? - Answer-200% for 10 min
What should be the air gap for a potable hose connected
to the potable water system be when Diodefilling another
system (IE Filling the ships jacket water system). -
Answer-2 times the diameter
What are the three types of wire rope cores? - Answer-
Synthetic Hemp Steel Core
Units with less than _____ permanent personnel can
request a waiver from CG441 requiring a 2 person count
team? - Answer-5
What type of inventory is an unscheduled physical count
of any item? - Answer-Spot inventory
, 3|Page
Hot water boilers for shore units should be inspected by a
license mechanical engineer or qualified marine inspector
how often? - Answer-Tri annually
A combination eye wash station / dilute shower is available
within _____ of battery charging areas? - Answer-25 feet
When referring to a warm diesel engine what is
considered prolonged idling? - Answer-Excess of 5 min
Afloat all PKP extinguishers containers are hydrostatically
tested every _____ or when the strength of the container
is questionable due to damage from corrosion or rough
handling? - Answer-12 years
What cutters shall maintain a bell book? - Answer-110 feet
or longer
If a cutter is under pilot house control what should be done
in regards to the bell book? - Answer-No bell book needs
to be kept
MKC SWE USCG EXAM NEWEST 2026 ACTUAL
VERIFIED EXAM WITH COMPLETE QUESTIONS AND
CORRECT DETAILED ANSWERS (100% VERIFIED
ANSWERS) |ALREADY GRADED A+| ||NEWEST
EXAM!!||
Boiler feed water feed water temperature shall be kept at
approximant _____ to assist in the removal of dissolved
oxygen? - Answer-200F
The dehumidifier shall maintain air in the MRG casing at
less than _____% relative humidity? - Answer-35%
Do not fill uncompensated overflow tanks above _____
import? - Answer-80%
Stripping tailpipes are _____ from the lowest point in the
tank? - Answer-¾ of an inch
When assembling a gate valve the gate should be in
_____ position before tighten the bonnet bolt? - Answer-
Half Open
,2|Page
When you fill the bottle for NOAP how full should you fill
the bottle? - Answer-1ml / Completely Full
When conducting a static load test what should a newly
installed or structurally repaired or overhauled deck fittings
be tested to and how long? - Answer-200% for 10 min
What should be the air gap for a potable hose connected
to the potable water system be when Diodefilling another
system (IE Filling the ships jacket water system). -
Answer-2 times the diameter
What are the three types of wire rope cores? - Answer-
Synthetic Hemp Steel Core
Units with less than _____ permanent personnel can
request a waiver from CG441 requiring a 2 person count
team? - Answer-5
What type of inventory is an unscheduled physical count
of any item? - Answer-Spot inventory
, 3|Page
Hot water boilers for shore units should be inspected by a
license mechanical engineer or qualified marine inspector
how often? - Answer-Tri annually
A combination eye wash station / dilute shower is available
within _____ of battery charging areas? - Answer-25 feet
When referring to a warm diesel engine what is
considered prolonged idling? - Answer-Excess of 5 min
Afloat all PKP extinguishers containers are hydrostatically
tested every _____ or when the strength of the container
is questionable due to damage from corrosion or rough
handling? - Answer-12 years
What cutters shall maintain a bell book? - Answer-110 feet
or longer
If a cutter is under pilot house control what should be done
in regards to the bell book? - Answer-No bell book needs
to be kept
