If a Balancing Authority cannot comply with the Control Performance or Disturbance Control
Standards, it shall implement what remedies to do so? (EOP-002 R6) - ANSWER Load
all available Generating Capacity
Deploy all Available Operating Reserves
Interrupt interruptible loads & Exports
Request emergency assistance from other BA's
Declare an EE through it's RC
Reduce load
If a BA cannot comply with CPS and DCS and has implemented all remedies but is still energy
deficient what should it do? EOP-002 R6 - ANSWER Manually Shed Load without delay
to return it's ACE to Zero
When an EEA is declared who is notified and by who? - ANSWER Balancing Authorities
and TP's are notified by the RC.
3 Common Modes of AGC and the most common one used by BA's? - ANSWER 1.
Constant Frequency
2. Constant Net Interchange
3. Tie- Line Bias (Most commonly used)
1
Standards, it shall implement what remedies to do so? (EOP-002 R6) - ANSWER Load
all available Generating Capacity
Deploy all Available Operating Reserves
Interrupt interruptible loads & Exports
Request emergency assistance from other BA's
Declare an EE through it's RC
Reduce load
If a BA cannot comply with CPS and DCS and has implemented all remedies but is still energy
deficient what should it do? EOP-002 R6 - ANSWER Manually Shed Load without delay
to return it's ACE to Zero
When an EEA is declared who is notified and by who? - ANSWER Balancing Authorities
and TP's are notified by the RC.
3 Common Modes of AGC and the most common one used by BA's? - ANSWER 1.
Constant Frequency
2. Constant Net Interchange
3. Tie- Line Bias (Most commonly used)
1
