1|Page
CMGT 2400 FINAL EXAM LATEST 2026 ACTUAL EXAM WITH
COMPLETE QUESTIONS AND CORRECT DETAILED ANSWERS (100%
VERIFIED ANSWERS) |ALREADY GRADED A+| ||PROFESSOR
VERIFIED|| ||BRANDNEW!!!||
A shear stud is used
a. as a decorative element on exposed steel structure
b. to temporarily connect a steel column to a steel beam
c. to connect a steel column to a steel beam
d. to develop composite action between the floor slab and beam -
ANSWER-d. to develop composite action between the floor slab
and beam
Pre-fabricated steel members are commonly used for roof and
floor structures are
a.built up members
b. wide flange beams
c. joist or joist girders
d.. plate girder - ANSWER-c. joist or joist girders
,2|Page
in a building seperation joint in a steel structural frame using one
column, the key connection is a
a. shear connection
b. welded connection
c. moment connection
d. slip connection - ANSWER-d. slip connection
In a W14x128 the
a. nominal depth is 14 inches
b. the nominal depth is 128 inches
c. weight is 14 lb/ ft
d. weight is 128 lb/ ft
e. a and d - ANSWER-e. a and d
Corrosion protection is generally NOT needed for structural steel
members if they are
a.located inside building envolope in a non corrosive enviroment
b. located inside the building envelope in any enviroment
c. located outside the building envelope in an unexposed location
,3|Page
d. located outside the building envelope in an exosed location -
ANSWER-a.located inside building envolope in a non corrosive
enviroment
In a slip-critical connection two members are connected
a. using rivets
b. using bolts in snug tight conditions
c. using bolts tightned to a high tensile stength
d. using a weld - ANSWER-b. using bolts in snug tight conditions
wrought iron
a. iron carbon alloy with 0.02% carbon
b. iron carbon alloy with 2.5% to 4% carbon
c. iron carbon alloy with 0.1% to 1.7% carbon - ANSWER-a. iron
carbon alloy with 0.02% carbon
cast iron
a. iron carbon alloy with 0.02% carbon
b. iron carbon alloy with 2.5% to 4% carbon
, 4|Page
c. iron carbon alloy with 0.1% to 1.7% carbon - ANSWER-iron
carbon alloy with 2.5% to 4% carbon
Steel
a. iron carbon alloy with 0.02% carbon
b. iron carbon alloy with 2.5% to 4% carbon
c. iron carbon alloy with 0.1% to 1.7% carbon - ANSWER-iron
carbon alloy with 0.1% to 1.7% carbon
A steel roof deck is generally anchored to supporting elements
a. self tapping screws
b. puddle welds
c.friction bolts
d. slip critical connection - ANSWER-b. puddle welds
Structural steel members are
a. shop fabricated and site assembled
b. shop fabricated and shop assembled
c. designed
CMGT 2400 FINAL EXAM LATEST 2026 ACTUAL EXAM WITH
COMPLETE QUESTIONS AND CORRECT DETAILED ANSWERS (100%
VERIFIED ANSWERS) |ALREADY GRADED A+| ||PROFESSOR
VERIFIED|| ||BRANDNEW!!!||
A shear stud is used
a. as a decorative element on exposed steel structure
b. to temporarily connect a steel column to a steel beam
c. to connect a steel column to a steel beam
d. to develop composite action between the floor slab and beam -
ANSWER-d. to develop composite action between the floor slab
and beam
Pre-fabricated steel members are commonly used for roof and
floor structures are
a.built up members
b. wide flange beams
c. joist or joist girders
d.. plate girder - ANSWER-c. joist or joist girders
,2|Page
in a building seperation joint in a steel structural frame using one
column, the key connection is a
a. shear connection
b. welded connection
c. moment connection
d. slip connection - ANSWER-d. slip connection
In a W14x128 the
a. nominal depth is 14 inches
b. the nominal depth is 128 inches
c. weight is 14 lb/ ft
d. weight is 128 lb/ ft
e. a and d - ANSWER-e. a and d
Corrosion protection is generally NOT needed for structural steel
members if they are
a.located inside building envolope in a non corrosive enviroment
b. located inside the building envelope in any enviroment
c. located outside the building envelope in an unexposed location
,3|Page
d. located outside the building envelope in an exosed location -
ANSWER-a.located inside building envolope in a non corrosive
enviroment
In a slip-critical connection two members are connected
a. using rivets
b. using bolts in snug tight conditions
c. using bolts tightned to a high tensile stength
d. using a weld - ANSWER-b. using bolts in snug tight conditions
wrought iron
a. iron carbon alloy with 0.02% carbon
b. iron carbon alloy with 2.5% to 4% carbon
c. iron carbon alloy with 0.1% to 1.7% carbon - ANSWER-a. iron
carbon alloy with 0.02% carbon
cast iron
a. iron carbon alloy with 0.02% carbon
b. iron carbon alloy with 2.5% to 4% carbon
, 4|Page
c. iron carbon alloy with 0.1% to 1.7% carbon - ANSWER-iron
carbon alloy with 2.5% to 4% carbon
Steel
a. iron carbon alloy with 0.02% carbon
b. iron carbon alloy with 2.5% to 4% carbon
c. iron carbon alloy with 0.1% to 1.7% carbon - ANSWER-iron
carbon alloy with 0.1% to 1.7% carbon
A steel roof deck is generally anchored to supporting elements
a. self tapping screws
b. puddle welds
c.friction bolts
d. slip critical connection - ANSWER-b. puddle welds
Structural steel members are
a. shop fabricated and site assembled
b. shop fabricated and shop assembled
c. designed
